Engineering topics
Publications and source records attributed to Smith, C. A..
NSWCDM computer program calculates aerodynamic loading and pressure distributions on supersonic configurations consisting of axisymmetric bodies with cruciform or planar canard and tail fins. Versatile program allows for configuration pitched and rolled, and fins deflected. Tail fins are interdigitated with respect to forward fins.
A comprehensive method has been developed to predict the static aerodynamic characteristics of missiles with one or two sets of cruciform fins. The method, utilizing a data base augmented by analysis, is applicable over the Mach number range 0.8 to 3.0 and for angles of attack from 0 to 45 deg. Arbitrary bank angles and control deflections are allowed. Loads are calculated on each component of the missile and include effects of body and fin vortices. Comparison with data shows good agreement over a wide range of flight conditions.
Three classes of antennas (reflectors, lenses, and arrays) are studied with a view toward their use as extremely large space antennas. RF performance characteristics, weight, manufacturing complexity, and cost are discussed for each class. Examples of antennas of each class which were built or analyzed are described to give an appreciation of current and expected industry capability. Multibeam antennas are discussed. General guidelines are given for use of the appropriate class of antenna to meet certain performance requirements, and recommendations are made for future study. The reflector emerges as the optimum choice for most very large aperture applications, though the lens and array appear ideally suited for use as feeds for multibeam near-field Cassegrain or Gregorian designs.
Sound generated in a moving fluid must propagate through a shear layer in order to be measured by a fixed instrument. These propagation effects were evaluated for noise sources typically associated with single and co-flowing subsonic jets and for subcritical flow over airfoils in such jets. The techniques for describing acoustic propagation fall into two categories: geometric acoustics and wave acoustics. Geometric acoustics is most convenient and accurate for high frequency sound. In the frequency range of interest to the present study (greater than 150 Hz), the geometric acoustics approach was determined to be most useful and practical.
Analytical methods are developed to predict the pressure distribution and overall loads on the hulls of airships which have close coupled, relatively large and/or high disk loading propulsors for attitude control, station keeping, and partial support of total weight as well as provision of thrust in cruise. The methods comprise a surface-singularity, potential-flow model for the hull and lifting surfaces (such as tails) and a rotor model which calculates the velocity induced by the rotor and its wake at points adjacent to the wake. Use of these two models provides an inviscid pressure distribution on the hull with rotor interference. A boundary layer separation prediction method is used to locate separation on the hull, and a wake pressure is imposed on the separated region for purposes of calculating hull loads. Results of calculations are shown to illustrate various cases of rotor-hull interference and comparisons with small scale data are made to evaluate the method.
An experimental investigation of a two-dimensional model of bluff body wake-surface interaction noise examines the changes in the flow field associated with changes in sound generated. Results show three distinct flow regimes separated by large differences in wake structure. In the first, with the surface in the near wake, discrete frequency sound is totally suppressed. At greater separation distances an amplified discrete frequency tone, a wake tone, is generated with the frequency a function of the separation distance. The final regime, with the surface in the far wake, is similar to a wake with no surface interaction.
Theoretical methods are being developed to predict the mutual interference between rotor wakes and the hull for semibuoyant vehicles. The objective of the investigation is to predict the pressure distribution and overall loads on the hull in the presence of rotors whose locations, tilt angles, and disk loading are arbitrarily specified. The methods involve development of potential flow models for the hull alone in a nonuniform onset flow, a rotor wake which has the proper features to predict induced flow outside the wake, and a wake centerline specification technique which accounts for the reactions of the wake to a nonuniform crossflow. The flow models are used in sequence to solve for the mutual influence of the hull and rotor(s) on each other and the resulting loads. A flow separation model is included to estimate the influence of separation on hull loads at high sideslip angles. Only limited results have been obtained to date. These were obtained on a configuration which was tested in the Ames Research Center 7- by 10-Foot Low Speed Tunnel under Goodyear Aircraft Corporation sponsorship and indicate the nature of the interference pressure distribution on a configuration in hover.
A comprehensive computer code has been developed for the prediction of the static aerodynamic characteristics of cruciform wing-body combinations with one or two sets of fins. The code may be used for subsonic, transonic, and supersonic speeds. Arbitrary bank angles and control deflections are allowed. The present version of the code may be used for angles of attack up to 20 deg. The code computes the forces and moments acting on each component of the missile including the effects of vortices shed by the body and fins. Comparisons between experiment and theory indicate good agreement for longitudinal characteristics and fair to good agreement for lateral characteristics.
Some aspects of sound generation by the interaction between a wedge and the wake of a circular cylinder in a uniform incompressible stream are studied experimentally. There is a minimum separation distance between the cylinder and the wedge when a tone is first generated. As the separation distance increases beyond the minimum, the frequency increases and asymptotically approaches the frequency normally present in the free wake. The Strouhal number defined as the ratio fd/U where f is the frequency, d is the cylinder diameter and U the free-stream speed is found to be in general a function of the Reynolds number (based on d) and h/d, where h is the separation distance. The minimum distance is in general a function of the Reynolds number. Flow visualization studies show that considerable differences exist between the flow below the minimum separation distance and just above it.
Theoretical analysis and experimental data are combined to yield the errors to be used with antenna gain, antenna patterns, and RF cable insertion loss measurements for the Mariner Venus-Mercury 1973 Flight Project. These errors apply to measurements conducted at the JPL Mesa, West Antenna Range, on the high gain antenna, low gain antenna, and RF coaxial cables.
Interference effects of radiation from plutonium dioxide fueled radioisotope thermoelectric generator
Nerve endings in maculae and cristae of chinchilla vestibular labyrinth
Errors in radiation measurements with a hohlraum reflectometer and infrared spectraphotometer