Engineering Papers⌕ Search

Engineering topics

Smit, Berend

Publications and source records attributed to Smit, Berend.

At least 37 records · Page 2

In Silico Discovery of Covalent Organic Frameworks for Carbon Capture

We screen a database of more than 69 000 hypothetical covalent organic frameworks (COFs) for carbon capture using parasitic energy as a metric. To compute CO 2 –framework interactions in molecular simulations, we develop a genetic algorithm to tune the charge equilibration method and derive accurate framework partial charges. Nearly 400 COFs are identified with parasitic energy lower than that of an amine scrubbing process using monoethanolamine; more than 70 are better performers than the best experimental COFs and several perform similarly to Mg-MOF-74. We analyze the effect of pore topology on carbon capture performance to guide the development of improved carbon capture materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data-driven design of metal–organic frameworks for wet flue gas CO 2 capture

Limiting the increase of CO 2 in the atmosphere is one of the largest challenges of our generation. Because carbon capture and storage is one of the few viable technologies that can mitigate current CO 2 emissions, much effort is focused on developing solid adsorbents that can efficiently capture CO 2 from flue gases emitted from anthropogenic sources. One class of materials that has attracted considerable interest in this context is metal-organic frameworks (MOFs), in which the careful combination of organic ligands with metal-ion nodes can, in principle, give rise to innumerable structurally and chemically distinct nanoporous MOFs. However, many MOFs that are optimized for the separation of CO 2 from nitrogen do not perform well when using realistic flue gas that contains water, because water competes with CO 2 for the same adsorption sites and thereby causes the materials to lose their selectivity. Although flue gases can be dried, this renders the capture process prohibitively expensive. Here we show that data mining of a computational screening library of over 300,000 MOFs can identify different classes of strong CO 2 -binding sites-which we term 'adsorbaphores'-that endow MOFs with CO 2 /N 2 selectivity that persists in wet flue gases. We subsequently synthesized two water-stable MOFs containing the most hydrophobic adsorbaphore, and found that their carbon-capture performance is not affected by water and outperforms that of some commercial materials. Testing the performance of these MOFs in an industrial setting and consideration of the full capture process-including the targeted CO 2 sink, such as geological storage or serving as a carbon source for the chemical industry-will be necessary to identify the optimal separation material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbons with Regular Pore Geometry Yield Fundamental Insights into Supercapacitor Charge Storage

We conduct molecular dynamics simulations of electrical double-layer capacitors (EDLCs) using a library of ordered, porous carbon electrode materials called zeolite templated carbons (ZTCs). The well-defined pore shapes of the ZTCs enable us to determine the influence of pore geometry on both charging dynamics and charge storage mechanisms in EDLCs, also referred to as supercapacitors. We show that charging dynamics are negatively correlated with the pore-limiting diameter of the electrode material and display signatures of both progressive charging and ion trapping. However, the equilibrium capacitance, unlike charging dynamics, is not strongly correlated to commonly used, purely geometric descriptors such as pore size. Instead, we find a strong correlation of capacitance to the charge compensation per carbon (CCpC), a descriptor we define in this work as the average charge of the electrode atoms within the coordination shell of a counterion. A high CCpC indicates efficient charge storage, as the strong partial charges of the electrode are able to screen counterion charge, enabling higher ion loading and thus more charge storage within the electrode at a fixed applied voltage. We determine that adsorption sites with a high CCpC tend to be found within pockets with a smaller radius of curvature, where the counterions are able to minimize their distance with multiple points on the electrode surface, and therefore induce stronger local partial charges.

25 ENERGY STORAGE↗

Amine Dynamics in Diamine-Appended Mg 2 (dobpdc) Metal–Organic Frameworks

In this work, variable-temperature 15 N solid-state NMR spectroscopy is used to uncover the dynamics of three diamines appended to the metal–organic framework Mg 2 (dobpdc) (dobpdc 4– = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate), an important family of CO 2 capture materials. The results imply both bound and free amine nitrogen environments exist when diamines are coordinated to the framework open Mg 2+ sites. There are rapid exchanges between two nitrogen environments for all three diamines, the rates and energetics of which are quantified by 15 N solid-state NMR data and corroborated by density functional theory calculations and molecular dynamics simulations. The activation energy for the exchange provides a measure of the metal–amine bond strength. The unexpected negative correlation between the metal–amine bond strength and CO 2 adsorption step pressure reveals that metal–amine bond strength is not the only important factor in determining the CO 2 adsorption properties of diamine-appended Mg 2 (dobpdc) metal–organic frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Building a Consistent and Reproducible Database for Adsorption Evaluation in Covalent–Organic Frameworks

We present a workflow that traces the path from the bulk structure of a crystalline material to assessing its performance in carbon capture from coal's postcombustion flue gases. This workflow is applied to a database of 324 covalent-organic frameworks (COFs) reported in the literature, to characterize their CO 2 adsorption properties using the following steps: (1) optimization of the crystal structure (atomic positions and unit cell) using density functional theory, (2) fitting atomic point charges based on the electron density, (3) characterizing the pore geometry of the structures before and after optimization, (4) computing carbon dioxide and nitrogen isotherms using grand canonical Monte Carlo simulations with an empirical interaction potential, and finally, (5) assessing the CO 2 parasitic energy via process modeling. The full workflow has been encoded in the Automated Interactive Infrastructure and Database for Computational Science (AiiDA). Both the workflow and the automatically generated provenance graph of our calculations are made available on the Materials Cloud, allowing peers to inspect every input parameter and result along the workflow, download structures and files at intermediate stages, and start their research right from where this work has left off. In particular, our set of CURATED (Clean, Uniform, and Refined with Automatic Tracking from Experimental Database) COFs, having optimized geometry and high-quality DFT-derived point charges, are available for further investigations of gas adsorption properties. We plan to update the database as new COFs are being reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulating Enhanced Methane Deliverable Capacity of Guest Responsive Pores in Intrinsically Flexible MOFs

In this work, a novel computational procedure, based on the principles of flat-histogram Monte Carlo, is developed for facile prediction of the adsorption thermodynamics of intrinsically flexible adsorbents. We then demonstrate how an accurate prediction of methane deliverable capacity in a metal–organic framework (MOF) with significant intrinsic flexibility requires use of such a method. Dynamic side chains in the framework respond to methane adsorbates and reorganize to exhibit a more conducive pore space at high adsorbate densities while simultaneously providing a less conducive pore space at low adsorbate densities. This “responsive pore” MOF achieves ~20% higher deliverable capacity than if the framework were rigid and elucidates a strategy for designing high deliverable capacity MOFs in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correction: CO 2 induced phase transitions in diamine-appended metal–organic frameworks

Correction for ‘CO 2 induced phase transitions in diamine-appended metal–organic frameworks’ by Bess Vlaisavljevich et al. , Chem. Sci. , 2015, 6 , 5177–5185. The authors regret that there are some discrepancies reproducing the data in the original article due to the determined coordinates not being the fully optimised geometries. The authors have provided more information.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Flexible Force Field for Metal–Organic Frameworks Using Dummy Model Coordination Bonds

We present force fields developed from periodic density functional theory (DFT) calculations that can be used in classical molecular simulations to model M–MOF-74 (M = Co, Fe, Mg, Mn, Ni, Zn) and its extended linker analogs. Our force fields are based on cationic dummy models (CDMs). These dummy models simplify the methodology required to tune the parameters and improve the accuracy of the force fields. We used our force fields to compare mechanical properties across the M–MOF-74 series and determine that increasing the size of the linker decreases the framework rigidity. In addition, we applied our force fields to an extended linker analog of Mg–MOF-74 and characterized the free energy of a previously reported deformation pattern in which the one-dimensional hexagonal channels of the framework become irregular. The free energy profiles confirm that the deformation is adsorbate induced and impossible to access solely by a pressure stimulus. On the basis of our results, we conclude that the force fields presented here and others that may be developed using our methodology are transferable across metal–organic framework series that share a metal center topology. Lastly, we believe that these force fields have the potential to be adapted for the study of complex problems in MOF chemistry, including defects and crystal growth, that have thus far been beyond the scope of classical molecular simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Nuclear Magnetic Resonance and Molecular Dynamics Study of Methane Adsorption in M 2 (dobdc) Metal–Organic Frameworks

We investigate the diffusion of methane in the metal-organic frameworks M 2 (dobdc) (M = Mg, Ni, Zn; dobdc 4- = 2,5-dioxido-1,4-benzenedicarboxylate) as a function of methane loading through a combination of nuclear magnetic resonance and molecular dynamics simulations. At low gas densities, our results suggest that favorable CH 4 -CH 4 interactions lower the free energy barrier for methane hopping between coordinatively unsaturated metal sites and thus enhance the translational motion of methane down the c -axis. At higher gas densities, CH 4 -CH 4 interactions become more significant, CH 4 -CH 4 collisions become more frequent, and the gas self-diffusion begins to decrease. Lastly, we determine that the self-diffusion coefficient of methane is inversely related to the binding energy at the coordinatively unsaturated metal sites, such that diffusion is most rapid in the Zn 2 (dobdc) framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nucleobase pairing and photodimerization in a biologically derived metal-organic framework nanoreactor

Biologically derived metal-organic frameworks (bio-MOFs) are of great importance as they can be used as models for bio-mimicking and in catalysis, allowing us to gain insights into how large biological molecules function. Through rational design, here we report the synthesis of a novel bio-MOF featuring unobstructed Watson-Crick faces of adenine (Ade) pointing towards the MOF cavities. We show, through a combined experimental and computational approach, that thymine (Thy) molecules diffuse through the pores of the MOF and become base-paired with Ade. The Ade-Thy pair binding at 40–45% loading reveals that Thy molecules are packed within the channels in a way that fulfill both the Woodward-Hoffmann and Schmidt rules, and upon UV irradiation, Thy molecules dimerize into Thy<>Thy. This study highlights the utility of accessible functional groups within the pores of MOFs, and their ability to ‘lock’ molecules in specific positions that can be subsequently dimerized upon light irradiation, extending the use of MOFs as nanoreactors for the synthesis of molecules that are otherwise challenging to isolate.

59 BASIC BIOLOGICAL SCIENCES↗

Metal Substitution as the Method of Modifying Electronic Structure of Metal–Organic Frameworks

Targeted modification of electronic structure is an important step in the optimization of metal-organic frameworks (MOFs) for photovoltaic, sensing, and photocatalytic applications. The key parameters to be controlled include the band gap, the absolute energy position of band edges, the excited state charge separation, and degree of hybridization between metal and ligand sites. Partial metal replacement, or metal doping, within secondary building units is a promising, yet relatively unexplored route to modulate these properties in MOFs. Therefore, in the present study, a general method for selecting metal dopant is worked out in theory and validated by experiment, retaining MIL-125 and UiO-66 as the model systems. Metal mixing enables targeted optimization of key electronic structure parameters. This method is applicable to any MOF architecture and can serve as a roadmap for future synthesis of MOFs with predefined properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DORI Reveals the Influence of Noncovalent Interactions on Covalent Bonding Patterns in Molecular Crystals Under Pressure

The study of organic molecular crystals under high pressure provides fundamental insight into crystal packing distortions and reveals mechanisms of phase transitions and the crystallization of polymorphs. These solid-state transformations can be monitored directly by analyzing electron charge densities that are experimentally obtained at high pressure. However, restricting the analysis to the featureless electron density does not reveal the chemical bonding nature and the existence of intermolecular interactions. This shortcoming can be resolved by the use of the DORI (density overlap region indicator) descriptor, which is capable of simultaneously detecting both covalent patterns and noncovalent interactions from electron density and its derivatives. Using the biscarbonyl[14]annulene crystal under pressure as an example, we demonstrate how DORI can be exploited on experimental electron densities to reveal and monitor changes in electronic structure patterns resulting from molecular compression. A novel approach based on a flood-fill-type algorithm is proposed for analyzing the topology of the DORI isosurface. This approach avoids the arbitrary selection of DORI isovalues and provides an intuitive way to assess how compression packing affects covalent bonding in organic solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated Multiscale Approach To Predict Self-Diffusion from a Potential Energy Field

For large-scale screening studies there is a need to estimate the diffusion of gas molecules in nanoporous materials more efficiently than (brute force) molecular dynamics. In particular for systems with low diffusion coefficients molecular dynamics can be prohibitively expensive. An alternative is to compute the hopping rates between adsorption sites using transition state theory. For large-scale screening this requires the automatic detection of the transition states between the adsorption sites along the different diffusion paths. Here an algorithm is presented that analyzes energy grids for the moving particles. It detects the energies at which diffusion paths are formed, together with their directions. This allows for easy identification of nondiffusive systems. For diffusive systems, it partitions the grid coordinates assigned to energy basins and transitions states, permitting a transition state theory based analysis of the diffusion. We test our method on CH 4 diffusion in zeolites, using a standard kinetic Monte Carlo simulation based on the output of our grid analysis. We find that it is accurate, fast, and rigorous without limitations to the geometries of the diffusion tunnels or transition states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Capturing chemical intuition in synthesis of metal-organic frameworks

We report a methodology using machine learning to capture chemical intuition from a set of (partially) failed attempts to synthesize a metal-organic framework. We define chemical intuition as the collection of unwritten guidelines used by synthetic chemists to find the right synthesis conditions. As (partially) failed experiments usually remain unreported, we have reconstructed a typical track of failed experiments in a successful search for finding the optimal synthesis conditions that yields HKUST-1 with the highest surface area reported to date. We illustrate the importance of quantifying this chemical intuition for the synthesis of novel materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating Charge Equilibration Methods To Generate Electrostatic Fields in Nanoporous Materials

Charge equilibration (Qeq) methods can estimate the electrostatic potential of molecules and periodic frameworks by assigning point charges to each atom, using only a small fraction of the resources needed to compute density functional (DFT)-derived charges. This makes possible, for example, the computational screening of thousands of microporous structures to assess their performance for the adsorption of polar molecules. Recently, different variants of the original Qeq scheme were proposed to improve the quality of the computed point charges. One focus of this research was to improve the gas adsorption predictions in metal-organic frameworks (MOFs), for which many different structures are available. In this work, we review the evolution of the method from the original Qeq scheme, understanding the role of the different modifications on the final output. We evaluated the result of combining different protocols and set of parameters, by comparing the Qeq charges with high quality DFT-derived DDEC charges for 2338 MOF structures. We focused on the systematic errors that are attributable to specific atom types to quantify the final precision that one can expect from Qeq methods in the context of gas adsorption where the electrostatic potential plays a significant role, namely, CO 2 and H 2 S adsorption. In conclusion, both the type of algorithm and the input parameters have a large impact on the resulting charges, and we draw some guidelines to help the user to choose the proper combination of the two for obtaining a meaningful set of charges. We show that, considering this set of MOFs, the accuracy of the original Qeq scheme is often still comparable with the most recent variants, even if it clearly fails in the presence of certain atom types, such as alkali metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flat-Histogram Monte Carlo as an Efficient Tool To Evaluate Adsorption Processes Involving Rigid and Deformable Molecules

Monte Carlo simulations are the foundational technique for predicting thermodynamic properties of open systems where the process of interest involves the exchange of particles. Thus, they have been used extensively to computationally evaluate the adsorption properties of nanoporous materials and are critical for the in silico identification of promising materials for a variety of gas storage and chemical separation applications. In this work we demonstrate that a well-known biasing technique, known as “flat-histogram” sampling, can be combined with temperature extrapolation of the free energy landscape to efficiently provide significantly more useful thermodynamic information than standard open ensemble MC simulations. Namely, we can accurately compute the isosteric heat of adsorption and number of particles adsorbed for various adsorbates over an extremely wide range of temperatures and pressures from a set of simulations at just one temperature. We extend this derivation of the temperature extrapolation to adsorbates with intramolecular degrees of freedom when Rosenbluth sampling is employed. Consequently, the working capacity and isosteric heat can be computed for any given combined temperature/pressure swing adsorption process for a large range of operating conditions with both rigid and deformable adsorbates. Finally, continuous thermodynamic properties can be computed with this technique at very moderate computational cost, thereby providing a strong case for its application to the in silico identification of promising nanoporous adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗