Engineering Papers⌕ Search

Engineering topics

Skorski, Daniel C

Publications and source records attributed to Skorski, Daniel C.

Engineering Glass Passivation Layers -Model Results

The immobilization of radioactive waste into glass waste forms is a baseline process of nuclear waste management not only in the United States, but worldwide. The rate of radionuclide release from these glasses is a critical measure of the quality of the waste form. Over long-term tests and using extrapolations of ancient analogues, it has been shown that well designed glasses exhibit a dissolution rate that quickly decreases to a slow residual rate for the lifetime of the glass. The mechanistic cause of this decreased corrosion rate is a subject of debate, with one of the major theories suggesting that the decrease is caused by the formation of corrosion products in such a manner as to present a diffusion barrier on the surface of the glass. Although there is much evidence of this type of mechanism, there has been no attempt to engineer the effect to maximize the passivating qualities of the corrosion products. This study represents the first attempt to engineer the creation of passivating phases on the surface of glasses. Our approach utilizes interactions between the dissolving glass and elements from the disposal environment to create impermeable capping layers. By drawing from other corrosion studies in areas where passivation layers have been successfully engineered to protect the bulk material, we present here a report on mineral phases that are likely have a morphological tendency to encrust the surface of the glass. Our modeling has focused on using the AFCI glass system in a carbonate, sulfate, and phosphate rich environment. We evaluate the minerals predicted to form to determine the likelihood of the formation of a protective layer on the surface of the glass. We have also modeled individual ions in solutions vs. pH and the addition of aluminum and silicon. These results allow us to understand the pH and ion concentration dependence of mineral formation. We have determined that iron minerals are likely to form a complete incrustation layer and we plan to look more closely at Vivianite [Fe3(PO4)2-8(H2O)] and Siderite [FeCO3] in the next stage of the project.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Pressure Hydrogen Materials Compatibility of Piezoelectric Films

Abstract: Hydrogen is being considered as a next-generation clean burning fuel. However, hydrogen has well known materials issues, including blistering and embrittlement in metals. Piezoelectric materials are used as actuators in hydrogen fuel technology. We present studies of materials compatibility of piezoelectric films in a high pressure hydrogen environment. Absorption of high pressure hydrogen was studied with Elastic Recoil Detection Analysis (ERDA) and Rutherford Back Scattering (RBS) in lead zirconate titanate (PZT) and barium titanate (BTO) thin films. Hydrogen surface degradation in the form of blistering and Pb mixing was also observed.

08 HYDROGEN↗

Gleenglass Swarf Research

Objective: John Sauer, Gleenglass principal, asked for research into innovative uses for a reclaimed glass slurry, also referred to as swarf. Through our research we were to determine a product and a market that could be manufactured using this fully recycled glass swarf. Background: Mr. Sauer receives the swarf from major glass manufacturers as a fine powder glass suspended in an organic dispersant and water. The swarf is produced through an industrial glass cutting process that results in the glass powder dispersed in water and recyclable glass disks; both are used in the project. Mr. Sauer's swarf studio testing has yet to produce any product with a value great enough to justify processing the swarf. Many of these limitations were believed to be due to the unknown composition and characteristics of the swarf as well as the limited lab testing ability of Mr. Sauer in his studio space. Deliverables: 1. The valuable characteristics of the swarf. 2. Products that can be produced with the swarf. 3. Market for developed products. 4. Capital investment needed to create developed product. 5. Any other applications of the swarf that were outside the scope of residential and commercial building material for use in future DOE grant proposals to the glass manufacturing facilities. 6. Additives that could change the color of the final piece to white, gray, or green.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗