Engineering topics

Singh, Ramkrishna

Publications and source records attributed to Singh, Ramkrishna.

18 records

DOE OSTI2026

Data for "Adsorptive Separation and Recovery of Triacetic Acid Lactone from Fermentation Broth"

Triacetic acid lactone (TAL) can be microbially produced and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $4.27/kg [$3.71−4.94/kg; 5th-95th percentiles] for the current state of technology and $2.83/kg [$2.46–3.29/kg] following potential near-term improvements to fermentation. Thus, this work provides an adsorptive process to recover microbially produced TAL that can be chemically upgraded to several industrial products.

Bioproducts↗

DOE OSTI2025

Cost of Deconstruction Depots for Diversified, Waste-Based Lignocellulosic Sugars Using Distillable Solvents

Transitioning to a bioeconomy that makes use of low-emission and waste feedstocks requires greater flexibility to accommodate seasonal variations and mitigate long-term storage challenges, such as material loss and fire risk. To achieve this goal, biomass deconstruction technologies must efficiently handle diverse feedstocks. Here, we assess the cost of using butylaminea distillable solventto deconstruct 22 different biomass feedstocks: 7 herbaceous, 9 woody, 4 food processing residues, and 2 blends. Lignocellulosic sugar production costs, based on current empirical data, range from $1.3 to 6.1/kg, suggesting that substantial improvements are required to compete with conventional sugars. The high solvent loading (850 g/kg of whole slurry) is a process bottleneck. Lowering the solvent loading to 59 g/kg of whole slurry, demonstrated in an L-scale reactor using poplar biomass, reduces the minimum sugar selling price by 33%. Solvent loading and recovery, solid loading, sugar yield, enzyme use, and delivered biomass cost all play key roles in reaching sugar production costs of $0.45-0.79/kg. Strategic feedstock blending to maximize carbohydrate content, process optimization to improve conversion efficiency, and the selection of low-cost feedstocks are important to advancing feedstock-flexible biorefineries.

TEA↗

DOE OSTI2024

Volatile fatty acid extraction from fermentation broth using a hydrophobic ionic liquid and in situ enzymatic esterification

Efficient recovery of volatile fatty acids (VFAs) from fermentation broth is a challenge due to low VFA titers and thus limits the commercialization of VFA production using biological routes. Liquid–liquid extraction using hydrophobic ionic liquids (ILs) shows great promise for the extraction and esterification of hydrophilic VFAs. In this study, several ILs were evaluated to select a water-immiscible and efficient extraction solvent. The selected IL, trihexyltetradecyl phosphonium dibutylphosphate ([P 666,14 ][DBP]), gave a cumulative VFA extraction of around 842.8 mg per g IL. The predicted excess enthalpy (H E ) and logarithmic activity coefficients ln(γ) using the COSMO-RS model were validated with the experimentally obtained VFA recovery from fermentation broth. To understand the extraction mechanism of VFAs, quantum theory of atoms in molecules (QTAIM) and noncovalent interaction (NCI) were performed. The results suggest that long chain fatty acids exhibit strong van der Waals interaction with the DBP anion leading to higher VFA extraction. The enzymatic esterification of VFAs with ethanol in [P 666,14 ][DBP] was optimized using the Box–Behnken response surface design of experiment. Under the optimized conditions, up to 83.7% of hexanoic acid was converted to ethyl esters, while other shorter chain VFAs have lower conversion efficiency (38.3–63.2%).

09 BIOMASS FUELS↗

DOE OSTI2023

Free fatty acid separation and recovery using resin

The disclosure provides various methods for separating and recovering free fatty acids crude oil containing free fatty acids using certain ion-exchange resins to reduce the amount of free fatty acids in the crude oil to 3% or less such that the resultant oil is useable in downstream chemical processes. After separation and removal of the free fatty acids form the crude oil, the ion-exchange resin is reusable in further free fatty acid separation reactions.

Singh, Vijay↗

DOE OSTI2023

Adsorptive recovery of volatile fatty acids from wastewater fermentation broth

This work developed an adsorptive separation and recovery process for anaerobically generated volatile fatty acids (VFAs) from swine wastewater fermentation. Batch adsorption studies were conducted using several weak anion exchange resins and synthetic adsorbent resins to identify a suitable candidate. Relite RAM2 with a tertiary amine functional group showed the highest adsorption (over 98%) of hexanoic acid. Under the different pH values (1.8–7.5) and extraction temperatures (30–50 ↑C), the highest adsorption was observed at a pH of 3.2, which is below the pKa of hexanoic acid, at all the evaluated temperatures. A full factorial design was used to optimize the resin and VFA concentrations, wherein over 99% adsorption could be achieved when the ratio of VFA to resin was below 0.23 (g/g) for model solution (VFAs in water). The adsorption equilibrium could be achieved within 30 min of contact time and 0.5% w/v NaOH was identified as a suitable desorption agent. Under the optimal conditions, 65–72% of VFAs present in fermentation broth was adsorbed, which was increased to 72–76% by using fresh resins. The VFAs adsorption and recovery efficiency were maintained for 9 successive cycles without requiring extensive resin washing and regeneration for both model solution and fermentation broth. Altogether, the work presents a comprehensive study for resin adsorption to recover VFAs and provides a potential industrial-relevant process to recover VFAs from fermentation broth.

09 BIOMASS FUELS↗

DOE OSTI2022

Bioenergy crops as alternative feedstocks for recovery of anthocyanins: A review

Anthocyanins are plant-based pigments known for their wide range of industrial applications. Berries, grapes, purple yam, purple corn, and black rice are among the chief dietary sources of anthocyanins. However, these sources have a well-established market in the food sector and cannot be diverted completely for the extraction of anthocyanins. Hence, there is a need to identify alternative sources of these natural colorants. In this review, color-bearing bioenergy crops with high productivity such as miscanthus, sorghum, and sugarcane have been proposed as potential feedstocks for the recovery of anthocyanins as co-products. The role of genetic modification in the biosynthesis of anthocyanins in these crops has been discussed. A consolidated bioprocessing approach has been proposed for the recovery of anthocyanins from bioenergy crops along with the production of bioethanol and lignin-based chemicals. Such an integrated process could make the overall process for the production of biofuels cost-effective.

09 BIOMASS FUELS↗

DOE OSTI2022

Adsorptive separation and recovery of triacetic acid lactone from fermentation broth

Triacetic acid lactone (TAL), an emerging bioprivileged molecule, can be produced microbially and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $\$4.27$/kg ($\$3.71$–4.94/kg; 5th–95th percentiles) given the current state of technology and $\$2.83$/kg ($\$2.46$–3.29/kg) following potential near-term improvements to fermentation. This work provides an adsorptive process for the recovery of microbially produced TAL that can be upgraded chemically to a range of industrial products.

09 BIOMASS FUELS↗

DOE OSTI2022

BioSTEAMDevelopmentGroup/Bioindustrial-Park/TAL

Cortes-Peña, Yoel↗

DOE OSTI2022

Valorization of Miscanthus x giganteus for sustainable recovery of anthocyanins and enhanced production of sugars

The increased awareness for eco-friendliness and sustainability has shifted the interest of stakeholders from synthetic colors to natural plant-based pigments. In this study, purple stemmed Miscanthus x giganteus was evaluated as a source of anthocyanins. Hydrothermal pretreatment was studied as a green, chemical-free process for recovering maximum anthocyanins in the pretreatment liquor. The highest recovery of 94.3 ± 1.5% w/w of the total anthocyanin concentration was obtained for a temperature and time combination of 170 °C and 10 min. The pretreatment also improved the enzymatic digestibility of the biomass and led to a 2.1-fold increase in the overall recovery of glucose (70.6 ± 0.5% w/w) at the end of 72 h. The sugar monomers obtained after the enzymatic hydrolysis of the pretreated biomass could be used for the production of biofuels or biochemicals in an integrated biorefinery based on purple-stemmed miscanthus. Altogether, this study demonstrates that the clean pretreatment method developed could lead to an additional product stream (rich in anthocyanins) along with its effect in reducing the recalcitrance of miscanthus biomass.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Data for Valorization of Miscanthus x giganteus for Sustainable Recovery of Anthocyanins and Enhanced Production of Sugars

The increased awareness for eco-friendliness and sustainability has shifted the interest of stakeholders from synthetic colors to natural plant-based pigments. In this study, purple stemmed Miscanthus x giganteus was evaluated as a source of anthocyanins. Hydrothermal pretreatment was studied as a green, chemical-free process for recovering maximum anthocyanins in the pretreatment liquor. The highest recovery of 94.3 ± 1.5% w/w of the total anthocyanin concentration was obtained for a temperature and time combination of 170 °C and 10 min. The pretreatment also improved the enzymatic digestibility of the biomass and led to a 2.1-fold increase in the overall recovery of glucose (70.6 ± 0.5% w/w) at the end of 72 h. The sugar monomers obtained after the enzymatic hydrolysis of the pretreated biomass could be used for the production of biofuels or biochemicals in an integrated biorefinery based on purple-stemmed miscanthus. Overall, this study demonstrates that the clean pretreatment method developed could lead to an additional product stream (rich in anthocyanins) along with its effect in reducing the recalcitrance of miscanthus biomass.

Biomass Analytics↗

DOE OSTI2022

Solvent‐free enzymatic esterification of free fatty acids with glycerol for biodiesel application: Optimized using the Taguchi experimental method

Abstract Presence of free fatty acids along with glycerides poses a technical difficulty for biodiesel production. This work used a Taguchi L9 design to optimize the solvent‐free enzymatic process to result in the esterification of oleic acid with glycerol. Under optimal conditions the esterification reaction temperature of 60°C, enzyme dose of 5 wt%, glycerol: oleic acid molar ratio of 5:1, and reaction time of 3 h, a 75.235 ± 2.19% conversion of oleic acid to esters was achieved. With the addition of molecular sieves, the conversion increased to 86.73% ± 1.09%. However, using the parameters predicted by Taguchi design (60°C, 5 wt%, 5:1, and 4.5 h), 88.5% ± 1.11% of oleic acid could be converted to esters derivative. Diglycerides were the major product, and the reaction equilibrium was attained after 4 h. The immobilized enzyme could be used up to seven times with only a 10% reduction in the conversion. Thus, the process can efficiently reduce the free fatty acid content of oil to make it suitable for biodiesel production.

09 BIOMASS FUELS↗

DOE OSTI2022

Data for Solvent-Free Enzymatic Esterification of Free Fatty Acids with Glycerol for Biodiesel Application: Optimized Using the Taguchi Experimental Method

Presence of free fatty acids along with glycerides poses a technical difficulty for biodiesel production. This work used a Taguchi L9 design to optimize the solvent-free enzymatic process to result in the esterification of oleic acid with glycerol. Under optimal conditions the esterification reaction temperature of 60°C, enzyme dose of 5 wt%, glycerol: oleic acid molar ratio of 5:1, and reaction time of 3 h, a 75.235 ± 2.19% conversion of oleic acid to esters was achieved. With the addition of molecular sieves, the conversion increased to 86.73% ± 1.09%. However, using the parameters predicted by Taguchi design (60°C, 5 wt%, 5:1, and 4.5 h), 88.5% ± 1.11% of oleic acid could be converted to esters derivative. Diglycerides were the major product, and the reaction equilibrium was attained after 4 h. The immobilized enzyme could be used up to seven times with only a 10% reduction in the conversion. Thus, the process can efficiently reduce the free fatty acid content of oil to make it suitable for biodiesel production.

Conversion↗

DOE OSTI2021

Integrated Biorefinery for Valorization of Engineered Bioenergy Crops—A Review

Biorefinery allows production of multiple bioproducts from various biomass and streams using suitable unit operations to improve the economics of process while minimizing waste generation. Biorefinery holds importance in the biofuel industry because multiple coproducts can allow to produce biofuels at a price which is competitive of fossil fuels. Newer generations of cellulosic biomasses are being developed to accumulate lipids and pigments. Such crops, which can be cultivated on land unsuitable for row crops, are aimed to provide drop-in fuels to reduce dependency on fossil fuels and food crops. This review describes the potential of recovery and value addition to different constituents of engineered crops besides producing drop-in fuels. As a result, the work also provides the market value of different products which can be obtained from engineered crops to make an informed decision.

09 BIOMASS FUELS↗

DOE OSTI2021

Hydrothermal pretreatment for valorization of genetically engineered bioenergy crop for lipid and cellulosic sugar recovery

Lipids accumulated in the vegetative tissues of cellulosic feedstocks can be a potential raw material for biodiesel and bioethanol production. In this work, bagasse of genetically engineered sorghum was subjected to liquid hot-water pretreatment at 170, 180, and 190°C for different reaction time. Under the optimal pretreatment condition (170°C, 20 min), the residue was enriched in glucan (57.39 ± 2.63 % w/w) and xylan (13.38 ± 0.49 % w/w). The total lipid content of the pretreated residue was 6.81% w/w, similar to that observed in untreated bagasse (6.30% w/w). Pretreatment improved the enzymatic digestibility of bagasse, allowing a recovery of 79% w/w and 86% w/w of glucose and xylose, respectively. The pretreatment and enzymatic saccharification resulted in a 2-fold increase in total lipid in enzymatic residue compared to the original bagasse. Furthermore, pretreatment and enzymatic hydrolysis enabled high sugar recovery while concentrating triglycerides and free fatty acids in the residue.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Data for Hydrothermal Pretreatment for Valorization of Genetically Engineered Bioenergy Crop for Lipid and Cellulosic Sugar Recovery

Lipids accumulated in the vegetative tissues of cellulosic feedstocks can be a potential raw material for biodiesel and bioethanol production. In this work, bagasse of genetically engineered sorghum was subjected to liquid hot-water pretreatment at 170, 180, and 190 °C for different reaction time. Under the optimal pretreatment condition (170 °C, 20 min), the residue was enriched in glucan (57.39 ± 2.63 % w/w) and xylan (13.38 ± 0.49 % w/w). The total lipid content of the pretreated residue was 6.81% w/w, similar to that observed in untreated bagasse (6.30% w/w). Pretreatment improved the enzymatic digestibility of bagasse, allowing a recovery of 79% w/w and 86% w/w of glucose and xylose, respectively. The pretreatment and enzymatic saccharification resulted in a 2-fold increase in total lipid in enzymatic residue compared to the original bagasse. Thus, pretreatment and enzymatic hydrolysis enabled high sugar recovery while concentrating triglycerides and free fatty acids in the residue.

Conversion↗

DOE OSTI2021

Response surface methodology guided adsorption and recovery of free fatty acids from oil using resin

The presence of free fatty acids interferes with the conversion of plant oils to biodiesel. In this work, four strong and weak base resins were evaluated for the removal of free fatty acids (FFA) from oil. Amberlite FPA 51 showed the highest adsorption capacity of FFA. A resin concentration above 3% could enable a higher percentage FFA adsorption. The adsorption process fitted a pseudo-first-order kinetic model and achieved equilibrium in approximately 8 h. A full factorial design was used to optimize the resin and FFA concentrations at a fixed temperature (40°C). A ratio of resin to fatty acid concentrations above 1.875 was sufficient for 70% adsorption and the amount adsorbed continued to increase with further added resin. A two-step washing of resin using hexane and ethanol recovered approximately 67.55%±4.05% of the initially added fatty acid. The resin that was used was regenerated with 5% NaOH and re-used for a minimum of three consecutive cycles. However, the adsorption capacity diminished to 75% of the initial cycle in cycles 2 and 3. Thus, the work presents a resin-based process for deacidification of oil to reduce fatty acid content of oil for biodiesel production.

09 BIOMASS FUELS↗

DOE OSTI2021

Data from Response Surface Methodology Guided Adsorption and Recovery of Free Fatty Acids from Oil Using Resin

The presence of free fatty acids interferes with the conversion of plant oils to biodiesel. Four strong and weak base resins were evaluated for the removal of free fatty acids (FFA) from oil. Amberlite FPA 51 showed the highest adsorption capacity of FFA. A resin concentration above 3% could enable a higher percentage FFA adsorption. The adsorption process fitted a pseudo-first-order kinetic model and achieved equilibrium in approximately 8 h. A full factorial design was used to optimize the resin and FFA concentrations at a fixed temperature (40° C). A ratio of resin to fatty acid concentrations above 1.875 was sufficient for 70% adsorption and the amount adsorbed continued to increase with further added resin. A two-step washing of resin using hexane and ethanol recovered approximately 67.55% ± 4.05% of the initially added fatty acid. The resin that was used was regenerated with 5% NaOH and re-used for a minimum of three consecutive cycles. However, the adsorption capacity diminished to 75% of the initial cycle in cycles 2 and 3. Thus, the work presents a resin-based process for deacidification of oil to reduce fatty acid content of oil for biodiesel production.

Conversion↗

DOE OSTI2021

Biodiesel from oil produced in vegetative tissues of biomass – A review

Biodiesel is a green, renewable alternative to petroleum-derived diesel. However, using vegetable oil for bio- diesel production significantly challenges the food security. Progress in metabolic engineering, understanding of lipid biosynthesis and storage have enabled engineering of vegetative tissues of plants such as sugarcane, sor- ghum, and tobacco for lipid production. Such sources could be cultivated on land resources, which are currently not suitable for row crops. Besides achieving significant lipid accumulation, it is imperative to maintain the fatty acid and lipid profile ideal for biodiesel production and engine performance. In this study, genetic modifications used to induce lipid accumulation in transgenic crops and the proposed strategies for efficient recovery of oil from these crops have been presented. Here, this paper highlights that lipids sourced from vegetative biomass in their native form would pose significant challenges in biodiesel production. Therefore, different strategies have been presented for improving feedstock quality to achieve high-quality biodiesel production.

09 BIOMASS FUELS↗