Engineering Papers⌕ Search

Engineering topics

Singh, Balwinder

Publications and source records attributed to Singh, Balwinder.

At least 37 records · Page 2

Effective radiative forcing of anthropogenic aerosols in E3SM version 1: historical changes, causality, decomposition, and parameterization sensitivities

Abstract. The effective radiative forcing of anthropogenic aerosols (ERFaer) is an important measure of the anthropogenic aerosol effects simulated by a global climate model. Here we analyze ERFaer simulated by the E3SM version 1 (E3SMv1) atmospheric model using both century-long free-running atmosphere–land simulations and short nudged simulations. We relate the simulated ERFaer to characteristics of the aerosol composition and optical properties, and we evaluate the relationships between key aerosol and cloud properties. In terms of historical changes from the year 1870 to 2014, our results show that the global mean anthropogenic aerosol burden and optical depth increase during the simulation period as expected, but the regional averages show large differences in the temporal evolution. The largest regional differences are found in the emission-induced evolution of the burden and optical depth of the sulfate aerosol: a strong decreasing trend is seen in the Northern Hemisphere high-latitude region after around 1970, while a continued increase is simulated in the tropics. The relationships between key aerosol and cloud properties (relative changes between pre-industrial and present-day conditions) also show evident changes after 1970, diverging from the linear relationships exhibited for the period of 1870–1969. In addition to the regional differences in the simulated relationships, a reduced sensitivity in cloud droplet number and other cloud properties to aerosol perturbations is seen when the aerosol perturbation is large. Consequently, the global annual mean ERFaer magnitude does not increase after around 1970. The ERFaer in E3SMv1 is relatively large compared to the recently published multi-model estimates; the primary reason is the large indirect aerosol effect (i.e., through aerosol–cloud interactions). Compared to other models, E3SMv1 features large relative changes in the cloud droplet effective radius in response to aerosol perturbations. Large sensitivity is also seen in the liquid cloud optical depth, which is determined by changes in both the effective radius and liquid water path. Aerosol-induced changes in liquid and ice cloud properties in E3SMv1 are found to have a strong correlation, as the evolution of anthropogenic sulfate aerosols affects both the liquid cloud formation and the homogeneous ice nucleation in cirrus clouds (that causes a large effect on longwave ERFaer). As suggested by a previous study, the large ERFaer appears to be one of the reasons why the model cannot reproduce the observed global mean temperature evolution in the second half of the 20th century. Sensitivity simulations are performed to understand which parameterization and/or parameter changes have a large impact on the simulated ERFaer. The ERFaer estimates in E3SMv1 for the shortwave and longwave components are sensitive to the parameterization changes in both liquid and ice cloud processes. When the parameterization of ice cloud processes is modified, the top-of-model forcing changes in the shortwave and longwave components largely offset each other, so the net effect is negligible. This suggests that, to reduce the magnitude of the net ERFaer, it would be more effective to reduce the anthropogenic aerosol effect through liquid or mixed-phase clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

OCEANFILMS (Organic Compounds from Ecosystems to Aerosols: Natural Films and Interfaces via Langmuir Molecular Surfactants) sea spray organic aerosol emissions – implementation in a global climate model and impacts on clouds

Sea spray aerosol is one of the major sources of atmospheric particulate matter globally. It has increasingly been recognized that organic matter derived from ocean biological precursors contributes significantly to the composition of submicron sea spray and may modify sea spray aerosol impacts on clouds and climate. This paper describes the implementation of the OCEANFILMS (Organic Compounds from Ecosystems to Aerosols: Natural Films and Interfaces via Langmuir Molecular Surfactants) parameterization for sea spray organic aerosol emissions in a global Earth system model, the Energy Exascale Earth System Model (E3SM). OCEANFILMS is a physically based model that links sea spray chemistry with ocean biogeochemistry using a Langmuir partitioning approach. We describe the implementation details of OCEANFILMS within E3SM, compare simulated aerosol fields with observations, and investigate impacts on simulated clouds and climate. Four sensitivity cases are tested, in which organic emissions either strictly add to or strictly replace sea salt emissions (in mass and number) and are either fully internally or fully externally mixed with sea salt. The simulation with internally mixed, added organics agrees reasonably well with observed seasonal cycles of organic matter in marine aerosol and has been selected as the default configuration of the E3SM. In this configuration, sea spray organic aerosol contributes an additional source of cloud condensation nuclei, adding up to 30 cm -3 to Southern Ocean boundary-layer cloud condensation nuclei concentrations (supersaturation = 0.1 %). The addition of this new aerosol source strengthens shortwave radiative cooling by clouds by -0.36 W m -2 in the global annual mean and contributes more than -3.5 W m -2 to summertime zonal mean cloud forcing in the Southern Ocean, with maximum zonal mean impacts of about -4 W m -2 around 50–60°S. This is consistent with a previous top-down, satellite-based empirical estimate of the radiative forcing by sea spray organic aerosol over the Southern Ocean. Through its mechanistic approach, OCEANFILMS offers a path towards improved understanding of the feedbacks between ocean biology, sea spray organic matter, and climate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Brown Carbon Fuel and Emission Source Attributions to Global Snow Darkening Effect

Snow and ice albedo reduction due to deposition of absorbing particles (i.e., snow darkening effect (SDE)) warms the Earth system and is largely attributed to black carbon (BC) and dust. Absorbing organic aerosol (BrC) also contributes to SDE but has received less attention due to uncertainty and challenges in model representation. This work incorporates the SDE of absorbing organic aerosol (BrC) from biomass burning and biofuel sources into the Snow Ice and Aerosol Radiative (SNICAR) model within a variant of the Community Earth System Model (CESM). Additionally, 12 different emission regions of BrC and BC from biomass burning and biofuel sources are tagged to quantify the relative contribution to global and regional SDE. BrC global SDE (0.021–0.056 Wm -2 ) is larger than other model estimates, corresponding to 37%–98% of the SDE from BC. When compared to observations, BrC simulations have a range in median bias (-2.5% to +21%), with better agreement in the simulations that include BrC photochemical bleaching. The largest relative contributions to global BrC SDE are traced to Northern Asia (23%–31%), Southeast Asia (16%–21%), and South Africa (13%–17%). Transport from Southeast Asia contributes nearly half of the regional BrC SDE in Antarctica (0.084–0.3 Wm -2 ), which is the largest regional input to global BrC SDE. Lower latitude BrC SDE is correlated with snowmelt, in-snow BrC concentrations, and snow cover fraction, while polar BrC SDE is correlated with surface insolation and snowmelt. This indicates the importance of in-snow processes and snow feedbacks on modeled BrC SDE.

54 ENVIRONMENTAL SCIENCES↗

Better calibration of cloud parameterizations and subgrid effects increases the fidelity of the E3SM Atmosphere Model version 1

Abstract. Realistic simulation of the Earth's mean-state climate remains a major challenge, and yet it is crucial for predicting the climate system in transition. Deficiencies in models' process representations, propagation of errors from one process to another, and associated compensating errors can often confound the interpretation and improvement of model simulations. These errors and biases can also lead to unrealistic climate projections and incorrect attribution of the physical mechanisms governing past and future climate change. Here we show that a significantly improved global atmospheric simulation can be achieved by focusing on the realism of process assumptions in cloud calibration and subgrid effects using the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1). The calibration of clouds and subgrid effects informed by our understanding of physical mechanisms leads to significant improvements in clouds and precipitation climatology, reducing common and long-standing biases across cloud regimes in the model. The improved cloud fidelity in turn reduces biases in other aspects of the system. Furthermore, even though the recalibration does not change the global mean aerosol and total anthropogenic effective radiative forcings (ERFs), the sensitivity of clouds, precipitation, and surface temperature to aerosol perturbations is significantly reduced. This suggests that it is possible to achieve improvements to the historical evolution of surface temperature over EAMv1 and that precise knowledge of global mean ERFs is not enough to constrain historical or future climate change. Cloud feedbacks are also significantly reduced in the recalibrated model, suggesting that there would be a lower climate sensitivity when it is run as part of the fully coupled E3SM. This study also compares results from incremental changes to cloud microphysics, turbulent mixing, deep convection, and subgrid effects to understand how assumptions in the representation of these processes affect different aspects of the simulated atmosphere as well as its response to forcings. We conclude that the spectral composition and geographical distribution of the ERFs and cloud feedback, as well as the fidelity of the simulated base climate state, are important for constraining the climate in the past and future.

54 ENVIRONMENTAL SCIENCES↗

HAERO: High-performance aerosols

SAND2021-15059 O Haero is a software library for representing aerosol size distributions, chemical species, and parameterized processes to use with a coupled atmospheric dynamics model or as a standalone tool. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Bosler, Peter↗

Development and Evaluation of Chemistry‐Aerosol‐Climate Model CAM5‐Chem‐MAM7‐MOSAIC: Global Atmospheric Distribution and Radiative Effects of Nitrate Aerosol

Abstract An advanced aerosol treatment, with a focus on semivolatile nitrate formation, is introduced into the Community Atmosphere Model version 5 with interactive chemistry (CAM5‐chem) by coupling the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) with the 7‐mode Modal Aerosol Module (MAM7). An important feature of MOSAIC is dynamic partitioning of all condensable gases to the different fine and coarse mode aerosols, as governed by mode‐resolved thermodynamics and heterogeneous chemical reactions. Applied in the free‐running mode from 1995 to 2005 with prescribed historical climatological conditions, the model simulates global distributions of sulfate, nitrate, and ammonium in good agreement with observations and previous studies. Inclusion of nitrate resulted in ∼10% higher global average accumulation mode number concentrations, indicating enhanced growth of Aitken mode aerosols from nitrate formation. While the simulated accumulation mode nitrate burdens are high over the anthropogenic source regions, the sea‐salt and dust modes respectively constitute about 74% and 17% of the annual global average nitrate burden. Regional clear‐sky shortwave radiative cooling of up to −5 W m −2 due to nitrate is seen, with a much smaller global average cooling of −0.05 W m −2 . Significant enhancements in regional cloud condensation nuclei (at 0.1% supersaturation) and cloud droplet number concentrations are also attributed to nitrate, causing an additional global average shortwave cooling of −0.8 W m −2 . Taking into consideration of changes in both longwave and shortwave radiation under all‐sky conditions, the net change in the top of the atmosphere radiative fluxes induced by including nitrate aerosol is −0.7 W m −2 .

54 ENVIRONMENTAL SCIENCES↗

Facilitating better and faster simulations of aerosol-cloud interactions in Earth system models

Focal Area(s): 1. Predictive modeling through the use of AI techniques and AI-derived model components; the use of AI and other tools to design a prediction system comprising a hierarchy of models. 2. Insight gleaned from complex data (both observed and simulated) using AI, big data analytics, and other advanced methods, including explainable AI and physics- or knowledge-guided AI. Science Challenge: One major challenge that Earth system models (ESMs) face in providing credible prediction of the Earth system and its water cycle characteristics (e.g., mean state, variability, and extreme events) is to accurately simulate aerosol-cloud interactions (ACI). The physical, chemical, and dynamical processes affecting ACI are extremely complex and they range from nanoscale to planetary scale. In each model development cycle, scientists spend significant efforts investigating model deficiencies and uncertainties associated with aerosols (e.g., emissions, chemical processes, aerosol microphysics, and transport) and clouds (e.g., macrophysics, microphysics, turbulence, and large-scale circulation) in order to develop improved treatments. However, despite decades of active research, ACI is still a major source of uncertainty in climate projections, even though great progress has been made. Specific scientific challenges include: (i) Parameterizations are developed based on limited data; (ii) The complexity of a parameterization required for accurate predictions is not understood; (iii) Incomplete and unknown physics leads to errors in the fully coupled Earth system; and (iv) Complex physics is computationally too expensive to employ in ESMs.

54 ENVIRONMENTAL SCIENCES↗

Future changes in isoprene-epoxydiol-derived secondary organic aerosol (IEPOX SOA) under the Shared Socioeconomic Pathways: the importance of physicochemical dependency

Abstract. Secondary organic aerosol (SOA) is a dominant contributor of fine particulate matter in the atmosphere, but the complexity of SOA formation chemistry hinders the accurate representation of SOA in models. Volatility-based SOA parameterizations have been adopted in many recent chemistry modeling studies and have shown a reasonable performance compared to observations. However, assumptions made in these empirical parameterizations can lead to substantial errors when applied to future climatic conditions as they do not include the mechanistic understanding of processes but are rather fitted to laboratory studies of SOA formation. This is particularly the case for SOA derived from isoprene epoxydiols (IEPOX SOA), for which we have a higher level of understanding of the fundamental processes than is currently parameterized in most models. We predict future SOA concentrations using an explicit mechanism and compare the predictions with the empirical parameterization based on the volatility basis set (VBS) approach. We then use the Community Earth System Model 2 (CESM2.1.0) with detailed isoprene chemistry and reactive uptake processes for the middle and end of the 21st century under four Shared Socioeconomic Pathways (SSPs): SSP1–2.6, SSP2–4.5, SSP3–7.0, and SSP5–8.5. With the explicit chemical mechanism, we find that IEPOX SOA is predicted to increase on average under all future SSP scenarios but with some variability in the results depending on regions and the scenario chosen. Isoprene emissions are the main driver of IEPOX SOA changes in the future climate, but the IEPOX SOA yield from isoprene emissions also changes by up to 50 % depending on the SSP scenario, in particular due to different sulfur emissions. We conduct sensitivity simulations with and without CO2 inhibition of isoprene emissions that is highly uncertain, which results in factor of 2 differences in the predicted IEPOX SOA global burden, especially for the high-CO2 scenarios (SSP3–7.0 and SSP5–8.5). Aerosol pH also plays a critical role in the IEPOX SOA formation rate, requiring accurate calculation of aerosol pH in chemistry models. On the other hand, isoprene SOA calculated with the VBS scheme predicts a nearly constant SOA yield from isoprene emissions across all SSP scenarios; as a result, it mostly follows isoprene emissions regardless of region and scenario. This is because the VBS scheme does not consider heterogeneous chemistry; in other words, there is no dependency on aerosol properties. The discrepancy between the explicit mechanism and VBS parameterization in this study is likely to occur for other SOA components as well, which may also have dependencies that cannot be captured by VBS parameterizations. This study highlights the need for more explicit chemistry or for parameterizations that capture the dependence on key physicochemical drivers when predicting SOA concentrations for climate studies.

54 ENVIRONMENTAL SCIENCES↗

Improving Time Step Convergence in an Atmosphere Model With Simplified Physics: The Impacts of Closure Assumption and Process Coupling

Convergence testing is a common practice in the development of dynamical cores of atmospheric models but is not as often exercised for the parameterization of sub-grid physics. An earlier study revealed that the stratiform cloud parameterizations in several predecessors of the Energy Exascale Earth System Model (E3SM) showed strong time-step sensitivity and slower-than-expected convergence when the model's time step was systematically refined. In this work, a simplified atmosphere model is configured that consists of the spectral-element dynamical core of the E3SM atmosphere model coupled with a large-scale condensation parameterization based on commonly used assumptions. This simplified model also resembles E3SM and its predecessors in the numerical implementation of process coupling and shows poor time-step convergence in short ensemble tests. We present a formal error analysis to reveal the expected time-step convergence rate and the conditions for obtaining such convergence. Numerical experiments are conducted to investigate the root causes of convergence problems. We show that revisions in the process coupling and closure assumption help to improve convergence in short simulations using the simplified model; the same revisions applied to a full atmosphere model lead to significant changes in the simulated long-term climate. This work demonstrates that causes of convergence issues in atmospheric simulations can be understood by combining analyses from physical and mathematical perspectives. Addressing convergence issues can help to obtain a discrete model that is more consistent with the intended representation of the physical phenomena.

54 ENVIRONMENTAL SCIENCES↗

Data for publication Wan et al. (2020, JAMES), Improving time-step convergence in an atmosphere model with simplified physics: the impacts of closure assumption and process coupling

This dataset contains simple condensation mdoel output and CAM4 model output that were used to produce figures in the following paper: Wan, H., Woodward, C. S., Zhang, S., Vogl, C. J., Stinis, P., Gardner, D. J., Rasch, P. J., Zeng, X., Larson, V. E., and Singh, B. (2020): Improving time-step convergence in an atmosphere model with simplified physics: the impacts of closure assumption and process coupling, Journal of Advances in Modeling Earth Systems, https://doi.org/10.1029/2019MS001982

54 ENVIRONMENTAL SCIENCES↗

Data from Wan et al. (2020, JAMES, DOI: 10.1029/2019MS001982)

This data set includes the simple condensation model output and CAM4 model output used to generate figures presented in the following paper: Wan, H., Woodward, C. S., Zhang, S., Vogl, C. J., Stinis, P., Gardner, D. J., Rasch, P. J., Zeng, X., Larson, V. E., and Singh, B. (2020): Improving time-step convergence in an atmosphere model with simplified physics: the impacts of closure assumption and process coupling, Journal of Advances in Modeling Earth Systems, https://doi.org/10.1029/2019MS001982

54 ENVIRONMENTAL SCIENCES↗

Data from Zhang et al. (2019, JAMES, DOI: 10.1029/2019MS001817)

This data set includes the EAM model output used to generate figures presented in the following paper: Zhang, S., Wan, H., Rasch, P. J., Balwinder, S., Larson, V. E., and Woodward, C. S. (2019): An objective and efficient method for assessing the impact of reduced-precision calculations on solution correctness, Journal of Advances in Modeling Earth Systems, https://doi.org/10.1029/2019MS001817

54 ENVIRONMENTAL SCIENCES↗

An Objective and Efficient Method for Assessing the Impact of Reduced-Precision Calculations On Solution Correctness

Recent studies have shown that reducing the precision of floating-point calculations in an atmospheric model can improve the models' computational performance without affecting model fidelity, but code changes are needed to accommodate lower precision, and a small number of calculations might need to retain higher precision to prevent undue round-off error. For complex and computationally expensive systems like the Energy Exascale Earth System Model (E3SM), a method is needed to objectively assess the quality of the lower-precision simulations and to quickly identify problematic code pieces This paper demonstrates that solution correctness can be evaluated through a simple and quantitative error metric based on time step convergence. The proposed test method can unambiguously detect the accumulation of precision error and objectively assess its impact on solution accuracy. Since fast physical processes are known to affect key features of the multi-year mean climate in an atmospheric model, we show that the convergence test applied to short simulations can provide useful information about the impact of reduced precision on a model’s long-term behavior. In contrast, the traditional way of climate model evaluation requires multi-year simulations and involves inspecting many physical quantities for statistical significance in the presence of natural variability. The simplicity, computational efficiency, and objectivity of the proposed method makes it very attractive for high-resolution model development. The method is also expected to be applicable to other models that numerically solve time evolution equations.

97 MATHEMATICS AND COMPUTING↗

Parametric Sensitivity and Uncertainty Quantification in the Version 1 of E3SM Atmosphere Model Based on Short Perturbed Parameter Ensemble Simulations

Abstract The atmospheric component of Energy Exascale Earth System Model version 1 has included many new features in the physics parameterizations compared to its predecessors. Potential complex nonlinear interactions among the new features create a significant challenge for understanding the model behaviors and parameter tuning. Using the one‐at‐a‐time method, the benefit of tuning one parameter may offset the benefit of tuning another parameter, or improvement in one target variable may lead to degradation in another target variable. To better understand the Energy Exascale Earth System Model version 1 model behaviors and physics, we conducted a large number of short simulations (three days) in which 18 parameters carefully selected from parameterizations of deep convection, shallow convection, and cloud macrophysics and microphysics were perturbed simultaneously using the Latin hypercube sampling method. From the perturbed parameter ensemble simulations and use of different skill score functions, we identified the most sensitive parameters, quantified how the model responds to changes of the parameters for both global mean and spatial distribution, and estimated the maximum likelihood of model parameter space for a number of important fidelity metrics. Comparison of the parametric sensitivity using simulations of two different lengths suggests that perturbed parameter ensemble using short simulations has some bearing on understanding parametric sensitivity of longer simulations. Results from this analysis provide a more comprehensive picture of the Energy Exascale Earth System Model version 1 behavior. The difficulty in reducing biases in multiple variables simultaneously highlights the need of characterizing model structural uncertainty (so‐called embedded errors) to inform future development efforts.

54 ENVIRONMENTAL SCIENCES↗

Insensitivity of the Cloud Response to Surface Warming Under Radical Changes to Boundary Layer Turbulence and Cloud Microphysics: Results From the Ultraparameterized CAM

We study the cloud response to a +4K surface warming in a new multi- scale climate model that uses enough interior resolution to begin explicitly resolving boundary layer turbulence (i.e. Ultra-Parameterization or UP), and the associated low clouds. UP's predictions are compared against those from standard Super-Parameterization (SP). The mean global cloud feedback turns out to be remarkably neutral across all of our simulations, despite some radical changes in both cloud microphysical parameter settings and cloud resolving model grid resolution. The overall cloud response to warming is the positive low-cloud feedbacks over land, negative feedbacks at high latitudes, and weak feedbacks over the low-latitude oceans. The most distinct effects of UP appear to be the result of tuning decisions impacting high latitude cloud feedback. UP's microphysics are tuned to optimize the model present-day, top-of-atmosphere radiation fluxes against CERES observations, by lowering the cloud ice-liquid phase-shift temperature ramp, adjusting the ice/liquid autoconversion rate, and increasing the ice fall speed. This reduces baseline high-latitude low cloud amounts, damping the phase change cloud feedback at high latitudes, leading to a slightly more positive global cloud feedback compared to SP. A sensitivity test that isolates these microphysical impacts from UP's grid resolution conrms that the microphysical settings are mostly responsible for the dierences between SP and UP cloud feedback.

54 ENVIRONMENTAL SCIENCES↗