Engineering Papers⌕ Search

Engineering topics

Sinclair, Michael B.

Publications and source records attributed to Sinclair, Michael B..

At least 55 records · Page 3

Rapidly tunable, narrow-band infrared filter arrays

Tunable filters can use Fano metasurface designs having extremely narrow transmission bands. The Fano metasurface can comprise dielectric or semiconductor materials and can produce transmission bands with quality factors well in excess of 1000—at least a factor of 50 greater than typical metamaterial-based infrared resonances. Numerical simulations of these metasurfaces show that the spectral position of the passband can be changed by slightly changing the position of a small dielectric perturbation block placed within the near-field of the resonator by using simple electromechanical actuation architectures that allow for such motion. An array of independently tunable narrowband infrared filters can thereby be fabricated that only requires deep-subwavelength motions of perturbing objects in the resonator's near-field.

Sinclair, Michael B.↗

Experimental Evidence of the Lorentz-like Effective Medium Resonance in Semiconductor Hyperbolic Metamaterials using Strong Coupling to Plasmonic Metasurfaces

The Lorentz-like effective medium resonance (LEMR) exhibited by the longitudinal effective permittivity of semiconductor hyperbolic metamaterials (SHMs) has been known for some time. However, direct observation of this resonance proved to be difficult. Here we experimentally demonstrate its existence by strongly coupling SHMs to plasmonic metasurfaces. We consider four strong coupling implementations of SHMs that exhibit different LEMR absorption profiles (both in frequency and strength) to validate our approach.

42 ENGINEERING↗

Active optical device enabled by dielectric metamaterials

An array of dielectric resonators is formed on a substrate. Each resonator includes an active medium having an optical transition that is operative in a process of photodetection or photoemission. The active media each include a quantum well multilayer. The dielectric resonators in the array are each dimensioned to provide a resonance that lies substantially at the frequency of the optical transition.

36 MATERIALS SCIENCE↗

High-harmonic generation from an epsilon-near-zero material

High-harmonic generation (HHG) is a signature optical phenomenon of strongly driven, nonlinear optical systems. Specifically, the understanding of the HHG process in rare gases has played a key role in the development of attosecond science. Recently, HHG has also been reported in solids, providing novel opportunities such as controlling strong-field and attosecond processes in dense optical media down to the nanoscale. Here, we report HHG from a low-loss, indium-doped cadmium oxide thin film by leveraging the epsilon-near-zero (ENZ) effect, whereby the real part of the material’s permittivity in certain spectral ranges vanishes, as well as the associated large resonant enhancement of the driving laser field. We find that ENZ-assisted harmonics exhibit a pronounced spectral redshift as well as linewidth broadening, resulting from the photo induced electron heating and the consequent time-dependent ENZ wavelength of the material. Furthermore, our results provide a new platform to study strong-field and ultrafast electron dynamics in ENZ materials, reveal new degrees of freedom for spectral and temporal control of HHG, and open up the possibilities of compact solid-state attosecond light sources.

36 MATERIALS SCIENCE↗

Enhancing Absorption Bandwidth through Vertically Oriented Metamaterials

Metamaterials research has developed perfect absorbers from microwave to optical frequencies, mainly featuring planar metamaterials, also referred to as metasurfaces. In this study, we investigated vertically oriented metamaterials, which make use of the entire three-dimensional space, as a new avenue to widen the spectral absorption band in the infrared regime between 20 and 40 THz. Vertically oriented metamaterials, such as those simulated in this work, can be experimentally realized through membrane projection lithography, which allows a single unit cell to be decorated with multiple resonators by exploiting the vertical dimension. In particular, we analyzed the cases of a unit cell containing a single vertical split-ring resonator (VSRR), a single planar split-ring resonator (PSRR), and both a VSRR and PSRR to explore intra-cell coupling between resonators. We show that the additional degrees of freedom enabled by placing multiple resonators in a unit cell lead to novel ways of achieving omnidirectional super absorption. Our results provide an innovative approach for controlling and designing engineered nanostructures.

36 MATERIALS SCIENCE↗

Broadband and Efficient Second-Harmonic Generation from a Hybrid Dielectric Metasurface/Semiconductor Quantum-Well Structure

A prominent nonlinear optical phenomenon that is extensively studied using nanostructured materials is second-harmonic generation (SHG) as it has applications in various fields. Achieving efficient SHG from a nanostructure requires a large second-order nonlinear susceptibility of the material system and large electromagnetic fields. For practical applications, the nanostructures should also have low losses, high damage thresholds, large bandwidths, wavelength scalability, dual mode operation in transmission and reflection, monolithic integrability, and ease of fabrication. While various approaches have demonstrated efficient SHG, to the best of our knowledge, none have demonstrated all these desired qualities simultaneously. Here, we introduce a hybrid approach for realizing efficient SHG in an ultrathin dielectric-semiconductor nonlinear device with all the above-mentioned desired properties. Our method uses high quality factor leaky mode resonances in dielectric metasurfaces that are coupled to intersubband transitions of semiconductor quantum wells. Using our device, we demonstrate SHG at pump wavelengths ranging from 8.5 to 11 μm, with a maximum second-harmonic nonlinear conversion factor of 1.1 mW/W 2 and maximum second-harmonic conversion efficiency of 2.5 × 10 –5 at modest pump intensities of 10 kW/cm 2 . Our conclusions open a new direction for designing low loss, broadband, and efficient ultrathin nonlinear optical devices.

42 ENGINEERING↗

Trajectory-based triggering system for hyperspectral imaging flow cytometer

A hyperspectral imaging flow cytometer can acquire high-resolution hyperspectral images of particles, such as biological cells, flowing through a microfluidic system. A trajectory-based triggering system can be used that will only trigger the acquisition of a hyperspectral image when an appropriate particle or cell is crossing an imaging line, thereby saving valuable resources and time. The hyperspectral imaging flow cytometer can provide detailed spatial maps of multiple emitting species, cell morphology information, and state of health. An optimized system can image about 20 cells per second. The hyperspectral imaging flow cytometer enables many thousands of cells to be characterized in a single session.

47 OTHER INSTRUMENTATION↗

Optoelectronic apparatus enabled by dielectric metamaterials

An array of dielectric resonators is formed on the substrate of an optoelectronic device. Each resonator includes an active medium having an optical transition that is operative in a process of photodetection or photoemission. The dielectric resonators in the array are each dimensioned to provide a resonance that lies substantially at the frequency of the optical transition.

36 MATERIALS SCIENCE↗

Semiconductor Hyperbolic Metamaterials at the Quantum Limit

We study semiconductor hyperbolic metamaterials (SHMs) at the quantum limit experimentally using spectroscopic ellipsometry as well as theoretically using a new microscopic theory. The theory is a combination of microscopic density matrix approach for the material response and Green’s function approach for the propagating electric field. Our approach predicts absorptivity of the full multilayer system and for the first time allows the prediction of in-plane and out-of-plane dielectric functions for every individual layer constructing the SHM as well as effective dielectric functions that can be used to describe a homogenized SHM.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable Infrared Devices via Ferroelectric Domain Reconfiguration

Despite widespread use in sensing, electro–optics, and catalysis, plasmonic elements are typically static in their spectral response. The subwavelength spatial confinement and enhanced electric fields intrinsic to plasmons provide a lever to realize dynamic spectral tunability—and thus multifunctional optical components—as small alterations in their dielectric environment are amplified by these effects. Here, electric–field (DC) control of phonon modes is leveraged in lead zirconate titante (PZT) ferroelectric bilayers to create tunable long–wave infrared (LWIR) plasmonic devices that demonstrate a combination of advantages—speed (>10 kHz), latching, and low–power switching (<1 µJ mm –2 )—unavailable together in approaches reported heretofore. Mechanistically, bias–induced domain reconfiguration alters the phonon energies defining PZT's optical permittivity, which determines the gap plasmon formed within the ferroelectric resting between patterned metal contacts. Furthermore the utility of ferroelectrics for tunable plasmonic devices is thus demonstrated while highlighting the promise of leveraging phonons for these purposes.

47 OTHER INSTRUMENTATION↗