Engineering Papers⌕ Search

Engineering topics

Simon, W.

Publications and source records attributed to Simon, W..

4 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Small rocket exhaust plume data

During recent cryodeposit tests with an 0.18-N thruster, the mass flux in the plume back field was measured for the first time for nitrogen, carbon dioxide, and a mixture of nitrogen, hydrogen, and ammonia at various inlet pressures. This mixture simulated gases that would be generated by a hydrazine plenum attitude propulsion system. The measurements furnish a base upon which to build a mathematical model of plume back flow that will be used in predicting the mass distribution in the boundary region of other plumes. The results are analyzed and compared with existing analytical predictions.

Chirivella, J. E.↗
NASA NTRS1972

Plume backscatter measurements using quartz crystal microbalances in JPL Molsink (molecular sink)

Quantitative evidence of gas flows in the far upstream region of small nozzles with large boundary layer flow are discussed. Gas mass fluxes were measured using quartz crystal microbalances. Both nitrogen and carbon dioxide gases were used as test gases. Gas deposition rates on the order of 100 monolayers per minute were detected 13 inches upstream of the nozzle exit plane. It is significant to note that the crystals detected gases considerably beyond the Prandtl-Meyer turning angle. The data from these tests will be essential in the formulation of scaling laws and analytical prediction methods for viscous plume behavior.

Simon, W.↗
NASA NTRS1972

Nozzle exhaust plume backscatter experiment using the JPL Molsink facility

Qualitative tests were made by injecting water through a rocket nozzle wall, and the droplet trajectories were observed photographically. These tests were conducted for nozzles in which boundary layer flow is significant. The tests indicated that both gases and particulate matter will be found in the region outside of the plume boundaries, and can be calculated using current analytical techniques. A test program is being conducted to measure the distribution of exhaust gases from small nozzles using an electron beam/photomultiplier system and a matrix of quartz crystal microbalances. Calibration tests, using simulated hydrazine exhaust product gas mixtures, were also conducted. The test program and results of the pumping calibration tests with hydrazine (simulated hydrazine exhaust products) are reported.

Simon, W.↗