Engineering Papers⌕ Search

Engineering topics

Simon, John D.

Publications and source records attributed to Simon, John D..

Methods of forming interdigitated back contact solar cells

Methods for forming interdigitated back contact solar cells from III-V materials are provided. According to an aspect of the invention, a method includes depositing a patterned Zn layer to cover first areas of an n-type emitter region, wherein the emitter region comprises a III-V material, and forming a passivated back contact region by counter-doping the first areas of the emitter region by diffusing Zn from the patterned Zn layer into the first areas of the emitter region, such that the first areas of the emitter region become p-type.

14 SOLAR ENERGY↗

Growth of AlGaAs, AlInP, and AlGaInP by Hydride Vapor Phase Epitaxy

In this work, we demonstrate hydride vapor phase epitaxy (HVPE) of Al x Ga 1-x As, Al x In 1-x P, and Al x Ga y In 1-x-y P using an AlCl 3 precursor. We study the growth of the Al x Ga 1-x As alloy system to elucidate the effects of deposition temperature, V/III ratio, and group V precursor species on Al solid incorporation via AlCl 3 . Crucially, the presence of group V hydride at the growth front kinetically promotes the solid incorporation of Al. We use these insights to demonstrate controlled deposition of Al x Ga 1-x As, and for the first time by HVPE, Al x In 1-x P and Al x Ga y In 1-x-y P. Finally, these results create exciting implications for HVPE-grown high-efficiency III-V solar cells and devices with reduced cost.

14 SOLAR ENERGY↗

Uniformity of GaAs solar cells grown in a kinetically-limited regime by dynamic hydride vapor phase epitaxy

We demonstrate solar cell devices grown on 50 mm diameter GaAs substrates by dynamic hydride vapor phase epitaxy (D-HVPE). In contrast to our prior D-HVPE devices, grown at 650 °C in a transport-limited regime, these devices were grown at 700 °C in a kinetically-limited growth regime in which the growth rate uniformity is controlled by thermally-activated surface reactions. These devices exhibit open-circuit voltages up to 1.07 V, nearly identical performance to the devices grown at lower temperature in a different growth regime. We evaluate the uniformity of device performance and find only a 1% variation in absolute, device efficiency across the majority of the wafer in devices without anti-reflection coating. We analyze the GaAs and GaInP thickness uniformity and GaInP compositional uniformity, using high-tresolution x-ray diffraction mapping, and find that any non-uniformity in device efficiency is not related to variations in these structural parameters. We combine three-dimensional computational fluid dynamics modeling of our reactor with a kinetic model for GaAs growth, and use the combined model to predict spatial GaAs growth rate over a 50 mm wafer area. We compare these predictions with experimental data from our D-HVPE reactor and find excellent agreement. We use the model to the gain insight into the specific mechanisms that control GaAs spatial uniformity in the kinetically-limitedgrowth regime. Furthermore, these results suggest a large parameter window for the growth of high-performance optoelectronic devices by D-HVPE, possibly with large area uniformity.

14 SOLAR ENERGY↗

Toward Low-Cost 4-Terminal GaAs//Si Tandem Solar Cells

Mechanically stacked III-V-on-Si (III-V//Si) tandem solar cells have demonstrated efficiencies beyond what can theoretically be achieved by single junction Si solar cells, but III-V costs are currently at least an order of magnitude higher than Si costs. Recent techno-economic analysis shows that costs could be substantially reduced by replacing traditional metalorganic vapor phase epitaxy (MOVPE) with a lower-cost III-V deposition technique, such as hydride vapor phase epitaxy (HVPE). This study analyzes the performance of an HVPE-grown GaAs top cell incorporated into a 4-terminal (4T) GaAs//Si tandem cell that achieved an efficiency of 29%, which is the highest solar cell efficiency fabricated without expensive deposition techniques such as MOVPE or MBE. We compare these results to an MOVPE-grown GaAs//Si tandem cell that has the same structure. Finally, we model optimizations to the HVPE-grown GaAs top cell and provide a near-term pathway to 31.4% efficiency with a low-cost III-V deposition technique.

14 SOLAR ENERGY↗

High throughput semiconductor deposition system

A reactor for growing or depositing semiconductor films or devices. The reactor may be designed for inline production of III-V materials grown by hydride vapor phase epitaxy (HVPE). The operating principles of the HVPE reactor can be used to provide a completely or partially inline reactor for many different materials. An exemplary design of the reactor is shown in the attached drawings. In some instances, all or many of the pieces of the reactor formed of quartz, such as welded quartz tubing, while other reactors are made from metal with appropriate corrosion resistant coatings such as quartz or other materials, e.g., corrosion resistant material, or stainless steel tubing or pipes may be used with a corrosion resistant material useful with HVPE-type reactants and gases. Using HVPE in the reactor allows use of lower-cost precursors at higher deposition rates such as in the range of 1 to 5 .mu.m/minute.

Young, David L.↗

Improvement of Short-Circuit Current Density in GaInP Solar Cells Grown by Dynamic Hydride Vapor Phase Epitaxy

We demonstrate GaInP solar cells grown by dynamic hydride vapor phase epitaxy with improved efficiency through elimination of nonradiative recombination centers. We redesigned our reactor to eliminate unintentional impurities, which led to a reduction of nearly 30 x in dark current. This improvement led to a significantly improved open-circuit voltage of 1.41 V and a band gap-voltage offset of 0.47 V in a device with a rear reflector, achieved without front surface passivation. We demonstrate that the limiting factor toward achieving higher efficiency is control over the emitter thickness. Recombination is high in the unpassivated emitter, but losses can be minimized by designing it to be thin. We show that Se diffusion from the GaAs contact layer into the base is responsible for unintentional thickening of the emitter. Use of reduced contact doping reduces the penetration of Se into the p-GaInP base layer. With improved control of Se diffusion, we achieve 13.0 mA/cm 2 and 15.2% certified efficiency in a single-junction GaInP cell structure that is optically equivalent to the top cell in a GaInP/GaAs tandem.

14 SOLAR ENERGY↗

High throughput semiconductor deposition system

A reactor for growing or depositing semiconductor films or devices. The reactor may be designed for inline production of III-V materials grown by hydride vapor phase epitaxy (HVPE). The operating principles of the HVPE reactor can be used to provide a completely or partially inline reactor for many different materials. An exemplary design of the reactor is shown in the attached drawings. In some instances, all or many of the pieces of the reactor formed of quartz, such as welded quartz tubing, while other reactors are made from metal with appropriate corrosion resistant coatings such as quartz or other materials, e.g., corrosion resistant material, or stainless steel tubing or pipes may be used with a corrosion resistant material useful with HVPE-type reactants and gases. Using HVPE in the reactor allows use of lower-cost precursors at higher deposition rates such as in the range of 1 to 5 .mu.m/minute.

36 MATERIALS SCIENCE↗

Tunnel Junction Development Using Hydride Vapor Phase Epitaxy

We demonstrate for the first time III-V tunnel junctions grown using hydride vapor phase epitaxy (HVPE) with peak tunneling currents >8 A/cm 2 , sufficient for operation of a multijunction device to several hundred suns of concentration. Multijunction solar cells rely on tunneling interconnects between subcells to enable series connection with minimal voltage loss, but tunnel junctions have never been shown using the HVPE growth method. HVPE has recently reemerged as a low-cost growth method for high-quality III-V materials and devices, including the growth of high-efficiency III-V solar cells. We previously showed single-junction GaAs solar cells with conversion efficiencies of ~24% with a path forward to equal or exceed the practical efficiency limits of crystalline Si. Moving to a multijunction device structure will allow for even higher efficiencies with minimal impact on cost, necessitating the development of tunnel interconnects. Here in this paper, we demonstrate the performance of both isolated HVPE-grown tunnel junctions, as well as single-junction GaAs solar cell structures with a tunnel junction incorporated into the contact region. We observe no degradation in device performance compared to a structure without the added junction.

14 SOLAR ENERGY↗

Controlled exfoliation of (100) GaAs-based devices by spalling fracture

The importance of exfoliation techniques increases as the semiconductor industry progresses toward thinner devices as a way to reduce material costs and improve performance. Here, the controlled spalling technique is a recently developed substrate removal process that utilizes the physics of fracture to create wafer cleavage parallel to the surface at a precise depth. In this letter, we apply principles of linear elastic fracture mechanics to predict the process conditions needed to exfoliate (100) GaAs of a desired thickness. Spalling can be initiated in a controllable manner, by depositing a stressor film of a residual stress value just below the threshold value to induce a spontaneous spall. Experimental data show process window requirements to controllably spall (100) GaAs. Additionally, experimental spall depth in (100) GaAs compares well to spalling mechanics predictions when the effects of wafer thickness and modulus are considered. To test spalled material quality, III-V single junction photovoltaic devices are lifted off of a (100)-GaAs substrate by spalling methods and electrical characteristics are recorded. No degradation is observed in the spalled device, illustrating the potential of this method to rapidly produce thin, high quality devices.

14 SOLAR ENERGY↗