Engineering topics

Simon, Horst D.

Publications and source records attributed to Simon, Horst D..

31 records · Page 2

NASA NTRS1993

Fast Multilevel Implementation of Recursive Spectral Bisection for Partitioning Unstructured Problems

If problems involving unstructured meshes are to be solved efficiently on distributed-memory parallel computers, the meshes must be partitioned and distributed across processors in a way that balances tile computational load and minimizes communication. The recursive spectral bisection method (RSB) has been shown to be very effective for such partitioning problems compared to alternative methods, but RSB in its simplest form is expensive. Here a multilevel version of RSB is introduced that attains about an order-of-magnitude improvement in run time on typical examples.

Barnard, Stephen T.↗

NASA NTRS1993

Experience in using SIMD and MIMD parallelism for computational fluid dynamics

One of the key objectives of the Applied Research Branch in the Numerical Aerodynamic Simulation (NAS) Systems Division at NASA Ames Research Center is the accelerated introduction of highly parallel machines into a fully operational environment. In this report we summarize some of the experiences with the parallel testbed machines at the NAS Applied Research Branch. We discuss the performance results obtained from the implementation of two computational fluid dynamics (CFD) applications, an unstructured grid solver and a particle simulation, on the Connection Machine CM-2 and the Intel iPSC/860.

Simon, Horst D.↗

NASA NTRS1992

Towards a fast implementation of spectral nested dissection

We describe the spectral nested dissection (SND) algorithm, a new algorithm for computing orderings appropriate for parallel factorization of sparse, symmetric matrices. The algorithm makes use of spectral properties of the Laplacian matrix associated with the given matrix to compute separators. We evaluate the quality of the spectral orderings with respect to several measures: fill, elimination tree height, height and weight balances of elimination trees, and clique tree heights. We use some very large structural analysis problems as test cases and demonstrate on these real applications (such as the Space Shuttle Solid Rocket Booster) that spectral orderings compare quite favorably with commonly used orderings, outperforming them by a wide margin for some of these measures. The only disadvantage of SND is its relatively long execution time. We will present some recent efforts to improve the execution time using both a multilevel and a hybrid approach. We use SND in computing a multifrontal numerical factorization with the different orderings on an eight processor Cray Y-MP and show its effectiveness. We believe that spectral nested dissection is a major breakthrough in terms of generating efficient sparse orderings for parallel machines.

Pothen, Alex↗

NASA NTRS1992

Towards the Teraflop CFD

We are surveying current projects in the area of parallel supercomputers. The machines considered here will become commercially available in the 1990 - 1992 time frame. All are suitable for exploring the critical issues in applying parallel processors to large scale scientific computations, in particular CFD calculations. This chapter presents an overview of the surveyed machines, and a detailed analysis of the various architectural and technology approaches taken. Particular emphasis is placed on the feasibility of a Teraflops capability following the paths proposed by various developers.

Schreiber, Robert↗

NASA NTRS1992

Future directions in computing and CFD

In recent years CFD on massively parallel machines has become a reality. This paper summarizes some recent trends both in high performance computing, and in CFD using parallel machines. The long term computational requirements for accomplishing some of the large scale problems in computational aerosciences, and current hardware and architecture trends are discussed. Performance results obtained from the implementation of some CFD applications on the Connection Machine CM-2 and the Intel iPSC/860 at NASA Ames Research Center are presented. It is argued that only massively parallel machines will be able to meet these grand challenge requirements.

Bailey, F. R.↗

NASA NTRS1992

Parallel computational fluid dynamics - Implementations and results

The present volume on parallel CFD discusses implementations on parallel machines, numerical algorithms for parallel CFD, and performance evaluation and computer science issues. Attention is given to a parallel algorithm for compressible flows through rotor-stator combinations, a massively parallel Euler solver for unstructured grids, a fast scheme to analyze 3D disk airflow on a parallel computer, and a block implicit multigrid solution of the Euler equations. Topics addressed include a 3D ADI algorithm on distributed memory multiprocessors, clustered element-by-element computations for fluid flow, hypercube FFT and the Fourier pseudospectral method, and an investigation of parallel iterative algorithms for CFD. Also discussed are fluid dynamics using interface methods on parallel processors, sorting for particle flow simulation on the connection machine, a large grain mapping method, and efforts toward a Teraflops capability for CFD.

Simon, Horst D.↗

NASA NTRS1992

A MIMD implementation of a parallel Euler solver for unstructured grids

A mesh-vertex finite volume scheme for solving the Euler equations on triangular unstructured meshes is implemented on a MIMD (multiple instruction/multiple data stream) parallel computer. Three partitioning strategies for distributing the work load onto the processors are discussed. Issues pertaining to the communication costs are also addressed. We find that the spectral bisection strategy yields the best performance. The performance of this unstructured computation on the Intel iPSC/860 compares very favorably with that on a one-processor CRAY Y-MP/1 and an earlier implementation on the Connection Machine.

Venkatakrishnan, V.↗

NASA NTRS1992

Aerodynamic simulation on massively parallel systems

This paper briefly addresses the computational requirements for the analysis of complete configurations of aircraft and spacecraft currently under design to be used for advanced transportation in commercial applications as well as in space flight. The discussion clearly shows that massively parallel systems are the only alternative which is both cost effective and on the other hand can provide the necessary TeraFlops, needed to satisfy the narrow design margins of modern vehicles. It is assumed that the solution of the governing physical equations, i.e., the Navier-Stokes equations which may be complemented by chemistry and turbulence models, is done on multiblock grids. This technique is situated between the fully structured approach of classical boundary fitted grids and the fully unstructured tetrahedra grids. A fully structured grid best represents the flow physics, while the unstructured grid gives best geometrical flexibility. The multiblock grid employed is structured within a block, but completely unstructured on the block level. While a completely unstructured grid is not straightforward to parallelize, the above mentioned multiblock grid is inherently parallel, in particular for multiple instruction multiple datastream (MIMD) machines. In this paper guidelines are provided for setting up or modifying an existing sequential code so that a direct parallelization on a massively parallel system is possible. Results are presented for three parallel systems, namely the Intel hypercube, the Ncube hypercube, and the FPS 500 system. Some preliminary results for an 8K CM2 machine will also be mentioned. The code run is the two dimensional grid generation module of Grid, which is a general two dimensional and three dimensional grid generation code for complex geometries. A system of nonlinear Poisson equations is solved. This code is also a good testcase for complex fluid dynamics codes, since the same datastructures are used. All systems provided good speedups, but message passing MIMD systems seem to be best suited for large miltiblock applications.

Haeuser, Jochem↗

NASA NTRS1990

Partitioning sparse matrices with eigenvectors of graphs

The problem of computing a small vertex separator in a graph arises in the context of computing a good ordering for the parallel factorization of sparse, symmetric matrices. An algebraic approach for computing vertex separators is considered in this paper. It is shown that lower bounds on separator sizes can be obtained in terms of the eigenvalues of the Laplacian matrix associated with a graph. The Laplacian eigenvectors of grid graphs can be computed from Kronecker products involving the eigenvectors of path graphs, and these eigenvectors can be used to compute good separators in grid graphs. A heuristic algorithm is designed to compute a vertex separator in a general graph by first computing an edge separator in the graph from an eigenvector of the Laplacian matrix, and then using a maximum matching in a subgraph to compute the vertex separator. Results on the quality of the separators computed by the spectral algorithm are presented, and these are compared with separators obtained from other algorithms for computing separators. Finally, the time required to compute the Laplacian eigenvector is reported, and the accuracy with which the eigenvector must be computed to obtain good separators is considered. The spectral algorithm has the advantage that it can be implemented on a medium-size multiprocessor in a straightforward manner.

Pothen, Alex↗

NASA NTRS1990

A Shifted Block Lanczos Algorithm 1: The Block Recurrence

In this paper we describe a block Lanczos algorithm that is used as the key building block of a software package for the extraction of eigenvalues and eigenvectors of large sparse symmetric generalized eigenproblems. The software package comprises: a version of the block Lanczos algorithm specialized for spectrally transformed eigenproblems; an adaptive strategy for choosing shifts, and efficient codes for factoring large sparse symmetric indefinite matrices. This paper describes the algorithmic details of our block Lanczos recurrence. This uses a novel combination of block generalizations of several features that have only been investigated independently in the past. In particular new forms of partial reorthogonalization, selective reorthogonalization and local reorthogonalization are used, as is a new algorithm for obtaining the M-orthogonal factorization of a matrix. The heuristic shifting strategy, the integration with sparse linear equation solvers and numerical experience with the code are described in a companion paper.

Grimes, Roger G.↗

NASA NTRS1990

Are highly parallel systems ready for prime time?

This is the edited and abbreviated transcript of a panel discussion held on May 9, 1989, in Los Angeles, during the conference "Parallel Computational Fluid Dynamics-Implementations and Results Using MIMD Computers." The purpose of the conference was to discuss recent developments in the use of MIMD parallel computers in high-performance computational fluid dynamics. The intent of the panel discussion was to summarize the findings of the meeting, and to give a perspective on the state of the art in using parallel computers for solving large-scale engineering and scientific application problems. The panelists were Creon Levit (NAS Systems Division, NASA-Ames Research Center, Moffett Field, California), Kent Misegades (Cray Research, Inc., Mendota Heights, Minnesota), Gary Montry (Myrias Computer Corporation, Albuquerque, New Mexico), Ken Neves (Boeing Computer Services, Seattle, Washington), Anthony Patera (Massachusetts Institute of Technology, Cambridge, Massachusetts), and Justin Rattner (Intel Scientific Computers, Beaverton, Oregon).

Simon, Horst D.↗

NASA NTRS1990

Using Strassen's algorithm to accelerate the solution of linear systems

Strassen's algorithm for fast matrix-matrix multiplication has been implemented for matrices of arbitrary shapes on the CRAY-2 and CRAY Y-MP supercomputers. Several techniques have been used to reduce the scratch space requirement for this algorithm while simultaneously preserving a high level of performance. When the resulting Strassen-based matrix multiply routine is combined with some routines from the new LAPACK library, LU decomposition can be performed with rates significantly higher than those achieved by conventional means. We succeeded in factoring a 2048 x 2048 matrix on the CRAY Y-MP at a rate equivalent to 325 MFLOPS.

Bailey, David H.↗

NASA NTRS1989

Floating point arithmetic in future supercomputers

Considerations in the floating-point design of a supercomputer are discussed. Particular attention is given to word size, hardware support for extended precision, format, and accuracy characteristics. These issues are discussed from the perspective of the Numerical Aerodynamic Simulation Systems Division at NASA Ames. The features believed to be most important for a future supercomputer floating-point design include: (1) a 64-bit IEEE floating-point format with 11 exponent bits, 52 mantissa bits, and one sign bit and (2) hardware support for reasonably fast double-precision arithmetic.

Bailey, David H.↗