Engineering Papers⌕ Search

Engineering topics

Sikorski, Ember

Publications and source records attributed to Sikorski, Ember.

Pt-Assisted Carbon Remediation of Mo2C Materials for CO Disproportionation

Using the CO disproportionation (Boudouard) reaction as a probe reaction, an in-depth analysis of temperature-programmed pulse response data shows that the addition of Pt to Mo2C mitigates deactivation of Mo active sites by acting as a carbon collector. CO2 production on Mo2C and Pt/Mo2C materials is dependent on both the activation energy and the CO surface concentration. Detailed plane-wave density functional theory calculations of the CO adsorption and disproportion reactions on Mo2C-supported Pt nanoparticles (NPs) are reported. The Mo2C was modeled by the ß-Mo2C (100) surface, and the Pt/Mo2C interface was modeled by the addition of 12 Pt atoms to the Mo2C (100) surface (12Pt@Mo2C). The potential energy surfaces of the Boudouard reaction were calculated on pure Mo2C, 12Pt@Mo2C, and Pt (111) surfaces. CO dissociation readily occurs on the Mo2C (100) surface, but not on the Pt (111) surface, with the former being exothermic and the latter being endothermic. At the Pt/Mo2C interface, CO dissociation is still exothermic, but with a larger energy barrier. The Boudouard reaction takes place on the Mo2C region, where CO2 is formed from a surface O atom dissociated from one CO molecule in reaction with another CO molecule, leaving one C atom on the surface. C adsorption is preferential on the Pt site in comparison to the Mo site. The supported Pt domains can collect the remaining C atoms, facilitating further CO2 formation on the active Mo sites. A Bader charge analysis shows that the surface metal-carbon bond is a mixture of covalent and ionic bonds, whereas the surface metal-oxygen bond is ionic. Electron localization function (ELF) and partial charge density calculations agree well with the Bader charge analysis. These computational results are consistent with experimental observations of the interaction of CO with Mo2C nanotube supported Pt domains in the transient regime under far from equilibrium conditions. The Boudouard reaction is an important side reaction, and the unexpected role found for Pt as a carbon collector, with Mo serving as a disproportionation site, provides a unique vantage point for understanding carbon and coke formation on catalytic materials.

Pt-assisted carbon remediation, Pt/Mo2C interface,↗

Out-of-pile performance of High Temperature Irradiation Resistant and Cladding Thermocouples

The High Temperature Irradiation Resistant thermocouple (HTIR-TCs) has proven to be the nuclear temperature sensor. It outlast and outperforms all other commercially available thermocouples above 1100 °C inside reactor pressure vessels; also, recent calibration methods have pushed the HTIR-TC to accurately read temperatures through thermal transients during reactor shutdowns and restarts. The new temperature range of HTIR-TCs is from 0 °C to 1650 °C. The main objective of this study is to address manufacturing a more robust TC for handling and inserting into reactor experiments; to also apply the TC to a wider application. The TC has shown to be mainly susceptible to oxygen levels inside the heat treatment and calibration process and it is recommended that O2 levels be brought to as low as possible. However, through modeling efforts the O2 has been found to intercalate only within the first few layers of niobium on the outer sheath. Lastly, multiple materials were used for the sheath and insulators; all with similar outcomes when testing occurred over a long period of time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Summary of High Temperature Irradiation Resistant Thermocouple Standarization Tests

Over the preceding ten years, continual research and development has been performed on the high temperature irradiation resistant thermocouple (HTIR-TC) by the team at Idaho National Laboratories (INL) High Temperature Test Laboratory (HTTL). The HTIR-TC has the capability of achieving high temperatures up to 1600°C or more. Further, the HTIR-TC has gone through many longevity tests both in and out of pile to show the amount of drift is minimal compared standard thermocouples. Key considerations for properties and materials of the HTIR-TC have been final diameter, ductility after heat treatment, and minimizing transmutation of materials during operation. Further, heat treatment and calibration processes have been established in order to consistently produce repeatable and reliable temperature readings. The current work provides further background for the standardization process of the HTIR-TC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Excited States of Light-Harvesting Systems Based on Fullerene/Graphene Oxide and Porphyrin/Smaragdyrin

In this work, we present a theoretical study at the density functional theory (DFT) level and time-dependent DFT of the ground and singlet excited states of electron donor–acceptor complexes formed by porphyrin (TPP)/smaragdyrin (TPOS) (expanded porphyrin), as light-harvesting systems, and fullerene (C 60 )/graphene oxide (GO), as acceptor nanocarbon structure. We investigate the effect of the nanocarbon on UV–vis electronic absorption of porphyrin/smaragdyrin, using the functionals B3LYP, PBE, M06, and wB97XD. The results showed the lowest deviation of the Q-band for the functional M06 (0.01–0.02 eV). Electronic absorption spectra calculated for the complexes with M06 predict that (a) graphene oxide increases the intensity of the Soret band, (b) fullerene produces a red-shift of the Q bands (4 nm) with respect to graphene oxide, and (c) smaragdyrin causes a red-shift of Q (27–48 nm) and Soret (37 nm) absorption bands as compared to porphyrin. We also investigate the effect of the nanocarbon structure on the charge-transfer (CT) excited states. Using the perturbative delta-SCF method with the PBE functional, we found that the charge-transfer excitation energy increases as TPOS-C 60 (2.53 eV) < TPP-GO (2.89 eV) < TPP-C 60 (3.01 eV) < TPOS-GO (3.28 eV). The presence of a nanocarbon structure affects more strongly smaragdyrin (~0.8 eV) than porphyrin (~0.1 eV). We show that the binding between smaragdyrin and fullerene C 60 favors the charge separation states with a lower energy cost, which means that these systems present an advantage for its application in photovoltaic cells.

36 MATERIALS SCIENCE↗