Engineering Papers⌕ Search

Engineering topics

Siegel, R.

Publications and source records attributed to Siegel, R..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Combined radiation, convection, and conduction for a system with a partially transmitting wall

The net radiation method is developed for systems having both opaque and partially transparent walls. Heat convection is present at the surfaces and heat conduction through the windows is taken into account. Specific equations are derived for a window between two parallel plates, where one plate is at an elevated temperature typical of what would be encountered in an electric furnace, and the other plate is being cooled. A two-band model is used with cutoff wavelengths typical of glass or quartz. Numerical results are obtained for the window temperature and the heat flow through the window. The effect on these quantities of various plate temperatures and emissivities is shown.

Siegel, R.↗
NASA NTRS1975

Liquid jet pumped by rising gas bubbles

From observations of a stream of gas bubbles rising through a liquid, a two-phase mathematical model is proposed for calculating the induced turbulent vertical liquid flow. The bubbles provide a large buoyancy force and the associated drag on the liquid moves the liquid upward. The liquid pumped upward consists of the bubble wakes and the liquid brought into the jet region by turbulent entrainment. The expansion of the gas bubbles as they arise through the liquid is taken into account. The continuity and momentum equations are solved numerically for an axisymmetric air jet submerged in water. Water pumping rates are obtained as a function of air flow rate and depth of submergence. Comparisons are made with limited experimental information in the literature.

Hussain, N. A.↗
NASA NTRS1975

Radiation exchange for a system with partially transmitting wall

An approach is presented for applying the net radiation method developed by Siegel and Howell (1972) and Sparrow and Cess (1966) to systems involving opaque and partially transmitting walls. The results obtained from the basic equations for various values of plate emissivities and temperatures are presented in graphs. Attention is given to the window temperature relative to the temperature of the hot wall and the heat transferred relative to that transferred without the window.

Hussain, N. A.↗
NASA NTRS1975

Liquid jet pumped by rising gas bubbles

A two-phase mathematical model is proposed for calculating the induced turbulent vertical liquid flow. Bubbles provide a large buoyancy force and the associated drag on the liquid moves the liquid upward. The liquid pumped upward consists of the bubble wakes and the liquid brought into the jet region by turbulent entrainment. The expansion of the gas bubbles as they rise through the liquid is taken into account. The continuity and momentum equations are solved numerically for an axisymmetric air jet submerged in water. Water pumping rates are obtained as a function of air flow rate and depth of submergence. Comparisons are made with limited experimental information in the literature.

Hussain, N. A.↗
NASA NTRS1974

Analysis of impingement heat transfer for two parallel liquid-metal slot jets

An analytical method is developed for determining heat transfer by impinging liquid-metal slot jets. The method involves mapping the jet flow region, which is bounded by free streamlines, into a potential plane where it becomes a uniform flow in a channel of constant width. The energy equation is transformed into potential plane coordinates and is solved in the channel flow region. Conformal mapping is then used to transform the solution back into the physical plane and obtain the desired heat-transfer characteristics. The analysis given here determines the heat-transfer characteristics for two parallel liquid-metal slot jets impinging normally against a uniformly heated flat plate. The liquid-metal assumptions are made that the jets are inviscid and that molecular conduction is dominating heat diffusion. Wall temperature distributions along the heated plate are obtained as a function of spacing between the jets and the jet Peclet number.

Siegel, R.↗
NASA NTRS1974

Conformal mapping technique for two-dimensional porous media and jet impingement heat transfer

Transpiration cooling and liquid metals both provide highly effective heat transfer. Using Darcy's law in porous media and the inviscid approximation for liquid metals, the local fluid velocity in these flows equals the gradient of a potential. The energy equation and flow region are simplified when transformed into potential plane coordinates. In these coordinates, the present problems are reduced to heat conduction solutions which are mapped into the physical geometry. Results are obtained for a porous region with simultaneously prescribed surface temperature and heat flux, heat transfer in a two-dimensional porous bed, and heat transfer for two liquid metal slot jets impinging on a heated plate.

Siegel, R.↗
NASA NTRS1973

Net radiation method for transmission through partially transparent plates

It is shown that the net radiation method for enclosures with opaque surfaces described by Siegel and Howell (1972) can, in an appropriately adapted version, provide a computation procedure suitable for situations with semitransparent regions. This procedure involves simple equations at each interface and can be readily applied to complicated systems such as those consisting of absorbing and nonabsorbing layers, and layers with different reflectivities at each interface. The equations can also be readily incorporated in a computerized design procedure.

Siegel, R.↗
NASA NTRS1973

Net radiation method for enclosure systems involving partially transparent walls

The net radiation method is developed for analyzing radiation heat transfer in enclosure systems involving partially transparent walls. One such system is an enclosure with windows in it. The conventional net radiation method was developed for enclosures having opaque walls. If a partially transparent wall is present, it will permit radiation to enter and leave the enclosure. The net radiation equations are developed here for gray and semigray enclosures with one or more windows. Another system of interest, such as in a flat plate solar collector, consists of a series of parallel transparent layers. The transmission characteristics of such window systems are obtained by the net radiation method, and the technique appears to be more convenient than the ray tracing method which has been used in the past. Relations are developed for windows consisting of any number of parallel layers having differing absorption coefficients and differing surface reflectivities, and for systems composed of parallel transmitting layers and opaque plates.

Siegel, R.↗
NASA NTRS1973

Analysis of heat transfer for a normally impinging liquid-metal slot jet

A two-dimensional liquid-metal slot jet that is impinging normally against a uniformly heated flat plate is analyzed. The distributions of wall temperature and heat-transfer coefficient are obtained as functions of position along the plate. The liquid-metal assumptions are made that the jet is inviscid and that molecular condition is dominating heat diffusion. The solution is obtained by mapping the jet flow region into a potential plane where it occupies a strip of uniform width. The energy equation is transformed into potential coordinates, and an exact solution obtained in the strip region. Conformal mapping is then used to transform the solution into the physical plane.

Siegel, R.↗
NASA NTRS1973

Analysis of shape of porous cooled medium for an imposed surface heat flux and temperature

The surface of a porous cooled medium is to be maintained at a specified design temperature while being subjected to uniform heating by an external source. An analytical method is given for determining the shape of the medium surface that will satisfy these boundary conditions. The analysis accounts for temperature dependent variations of fluid density and viscosity and for temperature dependent matrix thermal conductivity. The energy equation is combined with Darcy's law in such a way that a potential can be defined that satisfies Laplace's equation. All of the heat-transfer and flow quantities are expressed in terms of this potential. The determination of the shape of the porous cooled region is thereby reduced to a free-boundary problem such as in inviscid free jet theory. Two illustrative examples are carried out: a porous leading edge with coolant supplied through a slot and a porous cooled duct with a rectangular outer boundary.

Siegel, R.↗
NASA NTRS1973

Conformal mapping technique for two-dimensional porous media and jet impingement heat transfer

Transpiration cooling and liquid metals both provide highly effective heat transfer. Using Darcy's law in porous media, and the inviscid approximation for liquid metals, the local fluid velocity in these flows equals the gradient of a potential, The energy equation and flow region are simplified when transformed into potential plane coordinates. In these coordinates the present problems are reduced to heat conduction solutions which are mapped into the physical geometry. Results are obtained for a porous region with simultaneously prescribed surface temperature and heat flux, heat transfer in a two-dimensional porous bed, and heat transfer for two liquid metal slot jets impinging on a heated plate.

Siegel, R.↗
NASA NTRS1972

Calculation of irrotational wind pattern with application to Cleveland topography

Small perturbation theory is applied to compute the deflection of the wind blowing across land that has an irregular topography. As an illustration, the method is applied first to the flow around a single hill of Gaussian profile. Then calculations are made for the irregular topography on the east side of Cleveland where the elevation changes by several hundred feet. It was found that the topography produced small wind deflections that would not be of practical importance in air pollution dispersion studies. The calculations were for a neutrally stable atmosphere. Although they are not investigated here, other factors such as thermal stratification of the atmosphere, diurnal variations, and convection currents resulting from the proximity of Lake Erie and the city heat island effect are expected to be more significant than the influence of topography.

Siegel, R.↗
NASA NTRS1972

Analytical solution for heat transfer in three-dimensional porous media including variable fluid properties

An analytical solution is obtained for flow and heat transfer in a three-dimensional porous medium. Coolant from a reservoir at constant pressure and temperature enters one portion of the boundary of the medium and exits through another portion of the boundary which is at a specified uniform temperature and uniform pressure. The variation with temperature of coolant density and viscosity are both taken into account. A general solution is found that provides the temperature distribution in the medium and the mass and heat fluxes along the portion of the surface through which the coolant is exiting.

Siegel, R.↗
NASA NTRS1972

Inviscid analysis of jet injection between two moving streams

An analytical method is developed for determining the flow interaction when a two-dimensional jet is injected between two moving streams. The jet is flowing out of channel and is turned as it enters between the external streams. The local velocity variation resulting from the flow interaction provides a static pressure variation along the jet bounding streamlines that is a priori unknown. Hense, the flow must be obtained by coupling the three flow regions (the jet and the free stream on either side) along the jet boundaries. Both external streams have the same total pressure, which is different from that in the jet. The solution is for the condition that the total pressure in the jet does not differ from the free-stream value by a large amount compared with the free-stream dynamic head. Results are given for the shape of the jet boundaries for various injection configurations.

Goldstein, M. E.↗
NASA NTRS1972

Analysis of heat transfer in a porous cooled wall with variable pressure and temperature along the coolant exit boundary

Fluid from a reservior at constant pressure and temperature is forced through a porous wall of uniform thickness. The boundary through which the fluid exits has specified variations in pressure and temperature along it in one direction so that the flow and heat transfer are two-dimensional. The local fluid and matrix temperatures are assumed to be equal and therefore a single energy equation governs the temperature distribution within the wall. The solution is obtained by transforming this energy equation into potential plane coordinates, which results in a separable equation. A technique yielding an integral equation is used to adapt the general solution so that it satisfies the variable-pressure boundary condition. Analytical expressions are given for the normal exit velocity and heat flux along the exit boundary. Illustrative examples are carried out which indicate to what extent the solution is locally one-dimensional.

Siegel, R.↗
NASA NTRS1972

Thermal radiation heat transfer.

A comprehensive discussion of heat transfer by thermal radiation is presented, including the radiative behavior of materials, radiation between surfaces, and gas radiation. Among the topics considered are property prediction by electromagnetic theory, the observed properties of solid materials, radiation in the presence of other modes of energy transfer, the equations of transfer for an absorbing-emitting gas, and radiative transfer in scattering and absorbing media. Also considered are radiation exchange between black isothermal surfaces, radiation exchange in enclosures composed of diffuse gray surfaces and in enclosures having some specularly reflecting surfaces, and radiation exchange between nondiffuse nongray surfaces. The use of the Monte Carlo technique in solving radiant-exchange problems and problems of radiative transfer through absorbing-emitting media is explained.

Siegel, R.↗