Engineering Papers⌕ Search

Engineering topics

Shevitski, Brian

Publications and source records attributed to Shevitski, Brian.

Tuning colour centres at a twisted hexagonal boron nitride interface

The colour centre platform holds promise for quantum technologies, and hexagonal boron nitride has attracted attention due to the high brightness and stability, optically addressable spin states and wide wavelength coverage discovered in its emitters. However, its application is hindered by the typically random defect distribution and complex mesoscopic environment. In this study, employing cathodoluminescence, we demonstrate on-demand activation and control of colour centre emission at the twisted interface of two hexagonal boron nitride flakes. Further, we show that colour centre emission brightness can be enhanced by two orders of magnitude by tuning the twist angle. Additionally, by applying an external voltage, nearly 100% brightness modulation is achieved. Our ab initio GW and GW plus Bethe–Salpeter equation calculations suggest that the emission is correlated to nitrogen vacancies and that a twist-induced moiré potential facilitates electron–hole recombination. This mechanism is further exploited to draw nanoscale colour centre patterns using electron beams.

36 MATERIALS SCIENCE↗

Electron beam-induced nanopores in Bernal-stacked hexagonal boron nitride

Controlling the size and shape of nanopores in two-dimensional materials is a key challenge in applications such as DNA sequencing, sieving, and quantum emission in artificial atoms. Here, we investigate experimentally and theoretically triangular vacancies in (unconventional) Bernal-stacked AB-h-BN formed using a high-energy electron beam. Due to the geometric configuration of AB-h-BN, triangular pores in different layers are aligned, and their sizes are controlled by the duration of the electron irradiation. Interlayer covalent bonding at the vacancy edge is not favored, as opposed to what occurs in the more common AA'-stacked BN. A variety of monolayer, concentric and bilayer pores in bilayer AB-h-BN are observed in high-resolution transmission electron microscopy and characterized using ab initio simulations. Bilayer pores in AB-h-BN are commonly formed, and grow without breaking the bilayer character. Nanopores in AB-h-BN exhibit a wide range of electronic properties, ranging from half-metallic to non-magnetic and magnetic semiconducting. Therefore, because of the controllability of the pore size, the electronic structure is also highly controllable in these systems, and can potentially be tuned for particular applications.

2D materials↗

Anisotropic 2D excitons unveiled in organic-inorganic quantum wells

Here we report that two-dimensional (2D) excitons arise from electron-hole confinement along one spatial dimension. Such excitations are often described in terms of Frenkel or Wannier limits according to the degree of exciton spatial localization and the surrounding dielectric environment. In hybrid material systems, such as the 2D perovskites, the complex underlying interactions lead to excitons of an intermediate nature, whose description lies somewhere between the two limits, and a better physical description is needed. Here, we explore the photophysics of a tuneable materials platform where covalently bonded metal-chalcogenide layers are spaced by organic ligands that provide confinement barriers for charge carriers in the inorganic layer. We consider self-assembled, layered bulk silver benzeneselenolate, [AgSePh] ∞ , and use a combination of transient absorption spectroscopy and ab initio GW plus Bethe-Salpeter equation calculations. We demonstrate that in this non-polar dielectric environment, strongly anisotropic excitons dominate the optical transitions of [AgSePh] ∞ . We find that the transient absorption measurements at room temperature can be understood in terms of low-lying excitons confined to the AgSe planes with in-plane anisotropy, featuring anisotropic absorption and emission. Finally, we present a pathway to control the exciton behaviour by changing the chalcogen in the material lattice. Our studies unveil unexpected excitonic anisotropies in an unexplored class of tuneable, yet air-stable, hybrid quantum wells, offering design principles for the engineering of an ordered, yet complex dielectric environment and its effect on the excitonic phenomena in such emerging materials.

36 MATERIALS SCIENCE↗

Emergence of Topologically Nontrivial Spin-Polarized States in a Segmented Linear Chain

The synthesis of new materials with novel or useful properties is one of the most important drivers in the fields of condensed matter physics and materials science. Discoveries of this kind are especially significant when they point to promising future basic research and applications. Van der Waals bonded materials comprised of lower-dimensional building blocks have been shown to exhibit emergent properties when isolated in an atomically thin form. Here, we report the discovery of a transition metal chalcogenide in a heretofore unknown segmented linear chain form, where basic building blocks each consisting of two hafnium atoms and nine tellurium atoms (Hf 2 Te 9 ) are van der Waals bonded end-to-end. First-principle calculations based on density functional theory reveal striking crystal-symmetry-related features in the electronic structure of the segmented chain, including giant spin splitting and nontrivial topological phases of selected energy band states. In this work, atomic-resolution scanning transmission electron microscopy reveals single segmented Hf 2 Te 9 chains isolated within the hollow cores of carbon nanotubes, with a structure consistent with theoretical predictions. Van der Waals-bonded segmented linear chain transition metal chalcogenide materials could open up new opportunities in low-dimensional, gate-tunable, magnetic and topological crystalline systems.

36 MATERIALS SCIENCE↗

Self-assembly and metal-directed assembly of organic semiconductor aerogels and conductive carbon nanofiber aerogels with controllable nanoscale morphologies

A versatile and highly tunable synthesis for nanofiber aerogels based on the n-type organic semiconductor perylene tetracarboxylic diimide (PTCDI) is presented. PTCDI nanofiber aerogels are demonstrated to incorporate the organic semiconductor into a high surface area and porous morphology and can also be graphitized to synthesize carbon nanofiber (CNF) aerogels by thermal annealing. Using this approach, CNF aerogels with variable density and crystallinity are synthesized. Furthermore, by incorporating metal salts into the synthesis, metal-directed assembly yields a variety of nanoscale morphologies. The selection of post-synthesis thermal treatment can result in metal-directed assembly of PTCDI aerogels, low crystallinity graphitic aerogels decorated with metal nanoparticles, or highly crystalline graphitic aerogels with controllable nanoscale morphologies. The high surface area and porosity afforded by the aerogel morphology coupled with the intrinsic properties of PTCDI or CNFs is important for improving their performance in a number of applications including energy storage and catalysis.

36 MATERIALS SCIENCE↗

Blue-light-emitting color centers in high-quality hexagonal boron nitride

Light emitters in wide-band-gap semiconductors are of great fundamental interest and have potential as optically addressable qubits. Here we describe a unique color center in high-quality hexagonal boron nitride (h-BN) with a sharp emission line at 435 nm. The emitters are activated and deactivated by electron beam irradiation and have spectral and temporal characteristics consistent with atomic color centers weakly coupled to lattice vibrations. The emitters are conspicuously absent from commercially available h-BN and are present in only ultrahigh-quality h-BN grown using a high-pressure, high-temperature Ba-B-N flux/solvent, suggesting that these emitters originate from impurities or related defects specific to this unique synthetic route. Lastly, our results imply that the light emission is activated and deactivated by electron beam manipulation of the charge state of an impurity-defect complex.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable electronic structure in gallium chalcogenide van der Waals compounds

Transition-metal monochalcogenides comprise a class of two-dimensional materials with electronic band gaps that are highly sensitive to material thickness and chemical composition. Here, we explore the tunability of the electronic excitation spectrum in GaSe by using angle-resolved photoemission spectroscopy. The electronic structure of the material is modified by in situ potassium deposition as well as by forming GaS x Se 1- x alloy compounds. We find that potassium-dosed samples exhibit a substantial change of the dispersion around the valence-band maximum (VBM). The observed band dispersion resembles that of a single tetralayer and is consistent with a transition from the direct-gap character of the bulk to the indirect-gap character expected for monolayer GaSe. Upon alloying with sulfur, we observe a phase transition from AB to AA' stacking. Alloying also results in a rigid energy shift of the VBM towards higher binding energies, which correlates with a blueshift in the luminescence. The increase of the band gap upon sulfur alloying does not appear to change the dispersion or character of the VBM appreciably, implying that it is possible to engineer the gap of these materials while maintaining their salient electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrahigh-Temperature Ceramic Aerogels

In this work, we demonstrate the synthesis of high-surface-area, low-density refractory aerogels. The monolithic hafnium boride (HfB 2 ) and zirconium boride (ZrB 2 ) aerogels are prepared via borothermal reduction of precursor hafnia and zirconia aerogels, respectively, consisting of a fine mixture of boron nanoparticles and the metal oxide. This precursor boron–metal oxide (B–MO 2 ) composite aerogel was synthesized by modifying the pure ethanol solvent typically used in the epoxide-initiated sol–gel synthesis of metal oxide aerogels with an ethanolic boron nanoparticle suspension. After reduction, precursor aerogels are converted to metal boride aerogels containing primary particles in the sub-100 nm regime. The relative densities of the HfB 2 and ZrB 2 aerogels are 3 and 7%, respectively, and could be tailored by simply changing the density of the precursor aerogels via modifying the reagent concentrations or the drying conditions. Thermal conductivities of the ZrB 2 monoliths ranged from 0.18 to 0.33 W/(m K). The surface areas of the HfB 2 and ZrB 2 aerogels were 10 and 19 m 2 /g, respectively. Lastly, successful reduction of the aerogels to the diboride phase was confirmed by X-ray diffraction.

36 MATERIALS SCIENCE↗

Alternative Stacking Sequences in Hexagonal Boron Nitride

The relative orientation of successive sheets, i.e. the stacking sequence, in layered two-dimensional materials is central to the electronic, thermal, and mechanical properties of the material. Often different stacking sequences have comparable cohesive energy, leading to alternative stable crystal structures. Here we theoretically and experimentally explore different stacking sequences in the van der Waals bonded material hexagonal boron nitride (h-BN). We examine the total energy, electronic bandgap, and dielectric response tensor for five distinct high symmetry stacking sequences for both bulk and bilayer forms of h-BN. Two sequences, the generally assumed AA' sequence and the relatively unknown (for h-BN) AB (Bernal) sequence, are predicted to have comparably low energy. Lastly, we present a scalable modified chemical vapor deposition method that produces large flakes of virtually pure AB stacked h-BN; this new material complements the generally available AA' stacked h-BN.

36 MATERIALS SCIENCE↗

Fabrication of Subnanometer-Precision Nanopores in Hexagonal Boron Nitride

Here, we demonstrate the fabrication of individual nanopores in hexagonal boron nitride (h-BN) with atomically precise control of the pore shape and size. Previous methods of pore production in other 2D materials typically create pores with irregular geometry and imprecise diameters. In contrast, other studies have shown that with careful control of electron irradiation, defects in h-BN grow with pristine zig-zag edges at quantized triangular sizes, but they have failed to demonstrate production and control of isolated defects. In this work, we combine these techniques to yield a method in which we can create individual size-quantized triangular nanopores through an h-BN sheet. The pores are created using the electron beam of a conventional transmission electron microscope; which can strip away multiple layers of h-BN exposing single-layer regions, introduce single vacancies, and preferentially grow vacancies only in the single-layer region. We further demonstrate how the geometry of these pores can be altered beyond triangular by changing beam conditions. Precisely size- and geometry-tuned nanopores could find application in molecular sensing, DNA sequencing, water desalination, and molecular separation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Density Tunable Graphene Aerogels Using a Sacrificial Polycyclic Aromatic Hydrocarbon

In this paper, we demonstrate a new strategy to tune the density of graphene aerogels. This facile method is capable of producing graphene aerogels over a wide density range without compromising the morphology or quality of the material. Perylenetetracarboxylic acid dianydride serves as a sacrificial filler material that can be thermally decomposed to yield a graphene aerogel with tunable density.

36 MATERIALS SCIENCE↗

The important role of water in growth of monolayer transition metal dichalcogenides

We report that 2D transition metal dichalcogenides (TMDs) are commonly grown by chemical vapor deposition using transition metal oxides as solid precursors. Despite the widespread use of this technique, challenges in reproducibility, coverage, and material quality are pervasive, suggestive of unknown and uncontrolled process parameters. In this communication, we demonstrate the impact of water vapor on this growth process. Our results show a direct correlation between gas phase water content and the morphology of TMD films. In particular, we show that the presence of water enhances volatilization, and therefore the vapor transport of tungsten and molybdenum oxide. Surprisingly, we find that water not only plays an important role in volatilization but is also compatible with TMD growth. In fact, carefully controlled humidity can consistently produce high quality, luminescent materials.

36 MATERIALS SCIENCE↗