Engineering PapersSearch

Engineering topics

Shen, C. N.

Publications and source records attributed to Shen, C. N..

At least 37 records · Page 2

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

Problems related to an unmanned exploration of the planet Mars by means of an autonomous roving planetary vehicle are investigated. These problems include: design, construction and evaluation of the vehicle itself and its control and operating systems. More specifically, vehicle configuration, dynamics, control, propulsion, hazard detection systems, terrain sensing and modelling, obstacle detection concepts, path selection, decision-making systems, and chemical analyses of samples are studied. Emphasis is placed on development of a vehicle capable of gathering specimens and data for an Augmented Viking Mission or to provide the basis for a Sample Return Mission.

Gisser, D. G.

Measurement scanning schemes for terrain modeling

A scanning scheme for the laser rangefinder aboard an autonomous Mars Rover is developed. The rover is expected to be able to traverse an incline of slope up to 25% deg positive or negative. The total azimuth angle of the rangefinder is calculated so that the rangefinder can scan a width of 3 m at a distance of 3 m. A combination of two approaches is considered: scanning the field with a data point spacing appropriate for the terrain modeling technique, followed by zoom scanning with reduced spacing aimed at an obstacle location indicated in a previous terrain scan. It is found that the scan time and total number of data points can be reduced by dividing the field into corridors. The scan is divided into two subscans: the initial scan covering the entire field, and a corridor scan. The corridor scan method reduces the core required in the on-board computer. Hardware changes are expected to be small since the parameters of the corridor are fixed and a continuously variable point spacing is not necessary.

Friedman, M.

Classification of terrain models for Martian vehicle

This paper develops a procedure for an autonomous Martian rover to classify objects into obstacles and non-obstacles. These so called 'objects' are actually models generated by the Terrain Modeling and Edge Detection schemes. The classification process is performed using a set of object parameters which distinguish unobstructive objects from obstacles.

Leung, K. L.

Parameter estimation for terrain modeling from gradient data

This paper developes a method for mathematically modeling terrain surfaces for use on an unmanned Martian vehicle. The data collected by the vehicle consists of terrain height and two directional slopes at each data point. The parameters for the mathematical terrain model are stochastically determined by using least square approximations.-

Shen, C. N.

A practical obstacle detection system for the Mars Rover

Discussion of an obstacle detection system which uses a laser range finder as the principal sensing device. The laser scans the scene ahead and stores the range data for the terrain in a matrix form. This matrix can be thought of as a 'range image'. This range varies from point to point, but sharp changes are caused by the presence of obstacles. Some existing algorithms and one developed by the authors were used to obtain the outlines of obstacles from the 'range image'. All these algorithms end with a thresholding operation. A theoretical analysis shows how a proper value of the threshold may be chosen, given the type of irregularity of the terrain to be detected. The analysis also shows how large the statistics of measurement noise can be allowed without leading to false alarms.

Reed, M.

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

The following tasks related to the design, construction, and evaluation of a mobile planetary vehicle for unmanned exploration of Mars are discussed: (1) design and construction of a 0.5 scale dynamic vehicle; (2) mathematical modeling of vehicle dynamics; (3) experimental 0.4 scale vehicle dynamics measurements and interpretation; (4) vehicle electro-mechanical control systems; (5) remote control systems; (6) collapsibility and deployment concepts and hardware; (7) design, construction and evaluation of a wheel with increased lateral stiffness, (8) system design optimization; (9) design of an on-board computer; (10) design and construction of a laser range finder; (11) measurement of reflectivity of terrain surfaces; (12) obstacle perception by edge detection; (13) terrain modeling based on gradients; (14) laser scan systems; (15) path selection system simulation and evaluation; (16) gas chromatograph system concepts; (17) experimental chromatograph separation measurements and chromatograph model improvement and evaluation.

Frederick, D. K.

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

Problems related to the design and control of a mobile planetary vehicle to implement a systematic plan for the exploration of Mars are reported. Problem areas include: vehicle configuration, control, dynamics, systems and propulsion; systems analysis, terrain modeling and path selection; and chemical analysis of specimens. These tasks are summarized: vehicle model design, mathematical model of vehicle dynamics, experimental vehicle dynamics, obstacle negotiation, electrochemical controls, remote control, collapsibility and deployment, construction of a wheel tester, wheel analysis, payload design, system design optimization, effect of design assumptions, accessory optimal design, on-board computer subsystem, laser range measurement, discrete obstacle detection, obstacle detection systems, terrain modeling, path selection system simulation and evaluation, gas chromatograph/mass spectrometer system concepts, and chromatograph model evaluation and improvement.

Frederick, D. K.

Stochastic estimates of gradient from laser measurements for an autonomous Martian Roving Vehicle

The general problem presented in this paper is one of estimating the state vector x from the state equation h = Ax, where h, A, and x are all stochastic. Specifically, the problem is for an autonomous Martian Roving Vehicle to utilize laser measurements in estimating the gradient of the terrain. Error exists due to two factors - surface roughness and instrumental measurements. The errors in slope depend on the standard deviations of these noise factors. Numerically, the error in gradient is expressed as a function of instrumental inaccuracies. Certain guidelines for the accuracy of permissable gradient must be set. It is found that present technology can meet these guidelines.-

Shen, C. N.

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

Investigation of problems related to the design and control of a mobile planetary vehicle to implement a systematic plan for the exploration of Mars has been undertaken. Problem areas receiving attention include: vehicle configuration, control, dynamics, systems and propulsion; systems analysis; terrain modeling and path selection; and chemical analysis of specimens. The following specific tasks have been under study: vehicle model design, mathematical modeling of a dynamic vehicle, experimental vehicle dynamics, obstacle negotiation, electromechanical controls, collapsibility and deployment, construction of a wheel tester, wheel analysis, payload design, system design optimization, effect of design assumptions, accessory optimal design, on-board computer sybsystem, laser range measurement, discrete obstacle detection, obstacle detection systems, terrain modeling, path selection system simulation and evaluation, gas chromatograph/mass spectrometer system concepts, chromatograph model evaluation and improvement.

Frederick, D. K.

Analysis and design of a capsule landing system and surface vehicle control system for Mars exporation

The problems related to the design and control of a mobile planetary vehicle to implement a systematic plan for the exploration of Mars were investigated. Problem areas receiving attention include: vehicle configuration, control, dynamics, systems and propulsion; systems analysis; navigation, terrain modeling and path selection; and chemical analysis of specimens. The following specific tasks were studied: vehicle model design, mathematical modeling of dynamic vehicle, experimental vehicle dynamics, obstacle negotiation, electromechanical controls, collapsibility and deployment, construction of a wheel tester, wheel analysis, payload design, system design optimization, effect of design assumptions, accessory optimal design, on-board computer subsystem, laser range measurement, discrete obstacle detection, obstacle detection systems, terrain modeling, path selection system simulation and evaluation, gas chromatograph/mass spectrometer system concepts, chromatograph model evaluation and improvement and transport parameter evaluation.

Frederick, D. K.

A simplified satellite navigation system for an autonomous Mars roving vehicle.

The use of a retroflecting satellite and a laser rangefinder to navigate a Martian roving vehicle is considered in this paper. It is shown that a simple system can be employed to perform this task. An error analysis is performed on the navigation equations and it is shown that the error inherent in the scheme proposed can be minimized by the proper choice of measurement geometry. A nonlinear programming approach is used to minimize the navigation error subject to constraints that are due to geometric and laser requirements. The problem is solved for a particular set of laser parameters and the optimal solution is presented.

Janosko, R. E.

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

Investigation of problems related to control of a mobile planetary vehicle according to a systematic plan for the exploration of Mars has been undertaken. Problem areas receiving attention include: (1) overall systems analysis; (2) vehicle configuration and dynamics; (3) toroidal wheel design and evaluation; (4) on-board navigation systems; (5) satellite-vehicle navigation systems; (6) obstacle detection systems; (7) terrain sensing, interpretation and modeling; (8) computer simulation of terrain sensor-path selection systems; and (9) chromatographic systems design concept studies. The specific tasks which have been undertaken are defined and the progress which has been achieved during the period July 1, 1971 to December 31, 1971 is summarized.

Frederick, D. K.