Engineering Papers⌕ Search

Engineering topics

Shaw, Robert W

Publications and source records attributed to Shaw, Robert W.

At least 19 records

Probing Interfacial Electronic States in CdSe Quantum Dots using Second Harmonic Generation Spectroscopy

Understanding and rationally controlling the properties of nanomaterial surfaces is a rapidly expanding field of research due to the dramatic role they play on the optical and electronic properties vital to light harvesting, emitting and detection technologies. This information is essential to the continued development of synthetic approaches designed to tailor interfaces for optimal nanomaterial based device performance. In this work, closely spaced electronic excited states in model CdSe quantum dots (QDs) are resolved using second harmonic generation (SHG) spectroscopy, and the corresponding contributions from surface species to these states are assessed. Two distinct spectral features are observed in the SHG spectra, which are not readily identified in linear absorption and photoluminescence excitation spectra. These features include a weak band at 395 6 nm, which coincides with transitions to the 2S1/2 1Se state, and a much more pronounced band at 423 4 nm arising from electronic transitions to the 1P3/2 1Pe state. Chemical modification of the QD surfaces through oxidation resulted in disappearance of the SHG band corresponding to the 1P3/2 1Pe state, indicating prominent surface contributions. Signatures of deep trap states localized on the surfaces of the QDs are also observed. We further find that the SHG signal intensities depend strongly on the electronic states being probed and their relative surface contributions, thereby offering additional insight into the surface specificity of SHG signals from QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of nanodiamond foils for H- stripping to Support the Spallation Neutron Source (SNS) using hot filament chemical vapor deposition

Thin diamond foils are needed in many particle accelerator experiments regarding nuclear and atomic physics, as well as in some interdisciplinary research. Particularly, nanodiamond texture is attractive for this purpose as it possesses a unique combination of diamond properties such as high thermal conductivity, mechanical strength and high radiation hardness; therefore, it is a potential material for energetic ion beam stripper foils. At the ORNL Spallation Neutron Source (SNS), the installed set of foils must be able to survive a nominal five-month operation period, without the need for unscheduled costly shutdowns and repairs. Thus, a small foil about the size of a postage stamp is critical to the operation of SNS and similar sources in U.S. laboratories and around the world. We are investigating nanocrystalline, polycrystalline and their admixture films fabricated using a hot filament chemical vapor deposition (HFCVD) system for H- stripping to support the SNS at Oak Ridge National Laboratory. Here we discuss optimization of process variables such as substrate temperature, process gas ratio of H2/Ar/CH4, substrate to filament distance, filament temperature, carburization conditions, and filament geometry to achieve high purity diamond foils on patterned silicon substrates with manageable intrinsic and thermal stresses so that they can be released as free standing foils without curling. An in situ laser reflectance interferometry tool (LRI) is used for monitoring the growth characteristics of the diamond thin film materials. The optimization process has yielded free standing foils with no pinholes. The sp3/sp2 bonds are controlled to optimize electrical resistivity to reduce the possibility of surface charging of the foils. The integrated LRI and HFCVD process provides real time information on the growth of films and can quickly illustrate growth features and control film thickness. The results are discussed in the light of development of nanodiamond foils that will be able to withstand a few MW proton beam and hopefully will be able to be used after possible future upgrades to the SNS to greater than a 3MW beam.

Vispute, R D↗

Nanodiamond Foils for H- Stripping to Support the Spallation Neutron Source (SNS) and Related Applications

Thin diamond foils are needed in many particle accelerator experiments regarding nuclear and atomic physics, as well as in some interdisciplinary research. Particularly, nanodiamond texture is attractive for this purpose as it possesses a unique combination of diamond properties such as high thermal conductivity, mechanical strength and high radiation hardness; therefore, it is a potential material for energetic ion beam stripper foils. At the ORNL Spallation Neutron Source (SNS), the installed set of foils must be able to survive a nominal five-month operation period, without the need for unscheduled costly shutdowns and repairs. Thus, a single nanodiamond foil about the size of a postage stamp is critical to the entire operation of SNS and similar sources in U.S. laboratories and around the world. We are investigating nanocrystalline, polycrystalline and their admixture films fabricated using a hot filament chemical vapor deposition (HFCVD) system for H- stripping to support the SNS at Oak Ridge National Laboratory. Here we discuss optimization of process variables such as substrate temperature, process gas ratio of H2/Ar/CH4, substrate to filament distance, filament temperature, carburization conditions, and filament geometry to achieve high purity diamond foils on patterned silicon substrates with manageable intrinsic and thermal stresses so that they can be released as free standing foils without curling. An in situ laser reflectance interferometry tool (LRI) is used for monitoring the growth characteristics of the diamond thin film materials. The optimization process has yielded free standing foils with no pinholes. The sp3/sp2 bonds are controlled to optimize electrical resistivity to reduce the possibility of surface charging of the foils. The integrated LRI and HFCVD process provides real time information on the growth of films and can quickly illustrate growth features and control over film thickness. The results are discussed in the light of development of nanodiamond foils that will be able to withstand a few MW proton beam and hopefully will be able to be used after possible future upgrades to the SNS to greater than a 3MW beam.

Vispute, R D↗

Bead-based microfluidic immunoassay for diagnosis of Johne's disease

Microfluidics technology offers a platform for development of point-of-care diagnostic devices for various infectious diseases. In this study, we examined whether serodiagnosis of Johne s disease (JD) can be conducted in a bead-based microfluidic assay system. Magnetic micro-beads were coated with antigens of the causative agent of JD, Mycobacterium avium subsp. paratuberculosis. The antigen-coated beads were incubated with serum samples of JD-positive or negative serum samples and then with a fluorescently-labeled secondary antibody (SAB). To confirm binding of serum antibodies to the antigen, the beads were subjected to flow cytometric analysis. Different conditions (dilutions of serum and SAB, types of SAB, and types of magnetic beads) were optimized for a great degree of differentiation between the JD-negative and JD-positive samples. Using the optimized conditions, we tested a well-classified set of 155 serum samples from JD negative and JD-positive cattle by using the bead-based flow cytometric assay. Of 105 JD-positive samples, 63 samples (60%) showed higher antibody binding levels than a cut-off value determined by using antibody binding levels of JD-negative samples. In contrast, only 43-49 JD-positive samples showed higher antibody binding levels than the cut-off value when the samples were tested by commercially-available immunoassays. Microfluidic assays were performed by magnetically immobilizing a number of beads within a microchannel of a glass microchip and detecting antibody on the collected beads by laser-induced fluorescence. Antigen-coated magnetic beads treated with bovine serum sample and fluorescently-labeled SAB were loaded into a microchannel to measure the fluorescence (reflecting level of antibody binding) on the beads in the microfluidic system. When the results of five bovine serum samples obtained with the system were compared to those obtained with the flow cytometer, a high level of correlation (linear regression, r2 = 0.994) was observed. In a further experiment, we magnetically immobilized antigen-coated beads in a microchannel, reacted the beads with serum and SAB in the channel, and detected antibody binding to the beads in the microfluidic system. A strong antibody binding in JD-positive serum was detected, whereas there was only negligible binding in negative control experiments. Our data suggest that the bead-based microfluidic system may form a basis for development of an on-site serodiagnosis of JD. Key Words: Mycobacterium avium ssp. paratuberculosis, Johne s disease, microfluidics, lab-on-a-chip.

60 APPLIED LIFE SCIENCES↗

Nanoscale Chemical Imaging of Zinc Oxide Nanowire Corrosion

Nanoscale chemical images of individual bare and alumina-coated zinc oxide nanowires (NWs) were recorded using tip-enhanced second harmonic generation (SHG) spectroscopy before and after exposure to carbon dioxide and water vapor. The NWs were exposed for 0, 2, 4 and 6 days, and images were collected for the same bare nanowire after each two-day exposure period. Corrosion of the bare ZnO NW to zinc carbonate was evident from far-field and near-field SHG images and simultaneously recorded AFM data. The expected zinc carbonate corrosion product is SHG inactive. The AFM profile of the NW showed vertical and lateral expansion in different regions of the nanowire. The lower resolution far-field SHG signal decreased gradually and uniformly. The near-field SHG signal provided a profile of the evolving NW under investigation with a spatial resolution of ~100 nm which is in agreement with the AFM results. In contrast, alumina-coated ZnO NWs that were exposed in the same gas environment showed reduced, but still observable, degradation. The 3-nm thick alumina protective layer may have been insufficient to fully protect the NW, or the coating may have been incomplete. Thicker coatings preclude the tip-enhanced method. Nevertheless, the ability to monitor corrosion on a nanometer scale is a powerful tool for a fundamental understanding of surface chemical processes and should lead to the discovery of protective layers to prevent or delay degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exited-state Dynamics of Water-Soluble Polythiophene Derivatives: Temperature and Side-chain Length Effects

We report a time-resolved fluorescence study of three water-soluble polythiophene derivatives with homologous oligo(ethylene oxide) side-chains that are distinct in their lengths. Their excited-state relaxation dynamics was found to exhibit a strong dependence on both side-chain length and aqueous solution temperature. With lengthening side-chain, the isotropic fluorescence decays become not only remarkably slow but also increasingly complex. Except for the polymer with the shortest side-chain, significant acceleration of the isotropic decay was observed when the solution temperature was raised to a characteristic point and beyond. The corresponding time-resolved fluorescence anisotropies also show striking changes, manifest by a substantial increase of initial values from about 0.2 to 0.4 and the appearance of a pronounced fast decay component with an estimated lifetime of 36 ps. Both the anisotropic and isotropic decays are attributed to conformational relaxation of the polymer backbones, but different mechanisms are proposed for the effects induced by side-chain length and sample solution temperature.

Ma, Yingzhong↗

Exciton-Exciton Annihilation in Copper-Phthalocyanine Single-Crystal Nanowires

Femtosecond one-color pump-probe spectroscopy was applied to study exciton dynamics in single-crystal copper-phthalocyanine (CuPc) nanowires grown on an opaque silicon substrate. The transient reflectance kinetics measured at different pump fluences exhibit a remarkable intensity-dependent decay behavior which accelerates significantly with increasing pump pulse intensity. All the kinetic decays can be satisfactorily described using a bi-exponential decay function with lifetimes of 22 and 204 ps, and corresponding relative amplitudes depending on the pump intensity. The accelerated decay behavior observed at high pump intensities arises from a nonlinear exciton-exciton annihilation process. While this phenomenon has been found previously in crystalline metallophthalocyanine (MPc) polymorphs such as colloidal particles and thin films, the results obtained using the CuPc nanowires are markedly distinct, namely, much longer decay times and a linear intensity dependence of the initial peak amplitudes. Despite these differences, detailed data analysis further shows that, as found for other metal-phthalocyanine polymorphs, exciton-exciton annihilation in the CuPc nanowires is one-dimensional (1D) diffusion-limited, which possibly involves intra-chain exciton diffusion along 1D molecular stacks. The significantly long-lived excitons of CuPc nanowires in comparison to those of other crystalline polymorphs make them particularly suitable for photovoltaic applications.

Ma, Yingzhong↗

Stripper foil failure modes and cures at the Spallation Neutron Source

The Spallation Neutron Source comprises a 1 GeV, 1.4 MW linear accelerator followed by an accumulator ring and a liquid mercury target. To manage the beam loss caused by the $H^0$ excited states created during the $H^-$ charge exchange injection into the accumulator ring, the stripper foil is located inside one of the chicane dipoles. This has some interesting consequences that were not fully appreciated until the beam power reached about 840 kW. One consequence was sudden failure of the stripper foil system due to convoy electrons stripped from the incoming $H^-$ beam, which circled around to strike the foil bracket and cause bracket failure. Another consequence is that convoy electrons can reflect back up from the electron catcher and strike the foil and bracket. An additional contributor to foil system failure is vacuum breakdown due to the charge developed on the foil by secondary electron emission. In this paper we detail these and other interesting failure mechanisms and describe the improvements we have made to mitigate them.

43 PARTICLE ACCELERATORS↗

Alkyl Chain Length and Temperature Effects on Structural Properties of Pyrrolidinium-Based Ionic Liquids: A Combined Atomistic Simulation and Small-Angle X-ray Scattering Study.

Molecular dynamics (MD) simulations of 1-alkyl-1-methylpyrrolidinium 12 bis(trifluoromethanesulfonyl)imide ([CnMPy][Tf2N], n = 3, 4, 6, 8, 10) were conducted 13 using an all-atom model. Radial distribution functions (RDF) were computed and structure 14 functions were generated to compare with new X-ray scattering experimental results, 15 reported herein. The scattering peaks in the structure functions generally shift to lower Q 16 values with increased temperature for all the liquids in this series. However, the first sharp 17 diffraction peak (FSDP) in the longer alkyl chain liquids displays a marked shift to higher Q 18 values with increasing temperature. Alkyl chain-dependent ordering of the polar groups and 19 increased tail aggregation with increasing alkyl chain length were observed in the partial pair 20 correlation functions and the structure functions. The reasons for the observed alkyl chain- 21 dependent phenomena and temperature effects were explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SURFACE COATING EFFECTS ON THE ASSEMBLY OF GOLD NANOSPHERES

Optical spectra and atomic force microscopy (AFM) images of individually selected spheres and mechanically assembled silica-coated gold nanosphere pairs were recorded. The 10-nm spacing of the spheres allowed discrete dipole approximation (DDA) computational simulations to provide a meaningful results regarding the dimers. Both the data and simulation indicate that the silica shell integrity was maintained throughout the assembly, so that the shell therefore served as a means of rigid control of the spacing between the metal cores. Optical perturbative effects due to the presence of the fused silica substrate were negligible. Experimental investigations regarding less rigid polyvinylpyrrolidone (PVP) coatings also were performed and some comparisons were made.

36 MATERIALS SCIENCE↗

SNS STRIPPER FOIL FAILURE MODES AND THEIR CURES

The diamond stripper foils in use at the Spallation Neutron Source worked successfully with no failures until May 3, 2009, when we started experiencing a rash of foil system failures after increasing the beam power to ~840 kW. The main contributors to the failures are thought to be 1) convoy electrons, stripped from the incoming H beam, that strike the foil bracket and may also reflect back from the electron catcher, and 2) vacuum breakdown from the charge developed on the foil by secondary electron emission. In this paper we will detail these and other failure mechanisms, and describe the improvements we have made to mitigate them.

43 PARTICLE ACCELERATORS↗

SNS Injection Foil Experience

The Spallation Neutron Source comprises a 1 GeV, 1.4 MW linear accelerator followed by an accumulator ring and a liquid mercury target. To manage the beam loss caused by the H0 excited states created during the H charge exchange injection into the accumulator ring, the stripper foil is located inside one of the chicane dipoles. This has some interesting consequences that were not fully appreciated until the beam power reached about 840 kW. One consequence was sudden failure of the stripper foil system due to convoy electrons stripped from the incoming H beam, which circled around to strike the foil bracket and cause bracket failure. Another consequence is that convoy electrons can reflect back up from the electron catcher and strike the foil and bracket. An additional contributor to foil system failure is vacuum breakdown due to the charge developed on the foil by secondary electron emission. In this paper we will detail these and other interesting failure mechanisms, and describe the improvements we have made to mitigate them.

43 PARTICLE ACCELERATORS↗

Combined Apertureless Near-Field Optical Seconde-Harmonic Generation/Atomic Force Microscopy Imaging and Nanoscale Limit of Detection

A dual atomic force/near-field scanning optical microscope (AFM/NSOM) with an 800-nm ultrafast laser excitation source was used to investigate apertureless, tip-enhanced second harmonic generation (SHG) of ZnO nanowires. Data from far-field single-particle SHG microscopy images and spectra show little to no contributions from band-gap or other emission. The SHG microscope image and the simultaneous tapping mode AFM and apertureless SHG NSOM images indicate that ZnO nanowires exhibit a strong SHG signal consistent with uniform crystallinity, whereas other ZnO particles found with the wires had a variable, weaker SHG signal. Polarization data established values for Chi(33)/Chi(31) close to previous estimates. Our AFM/SHG NSOM data suggest a particle degradation mechanism under atmospheric conditions starting at the endpoints of the nanowire.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Computational and Experimental Evaluation of Nanoparticle Coupling

We present theoretical and experimental studies on the optical properties of dimers composed of octahedron-shaped, gold nanoparticles. The experimental measurements show that the photoluminescence varies quite dramatically as two octahedra are brought into close proximity. AFM images and optical emission have been recorded for dimers in uncoupled and strongly coupled configurations. The former displays a single emission peak, while the latter shows two peaks with the new feature at longer wavelengths. Calculations indicate that the red-shifted peak originates from a strongly coupled plasmon state that oscillates along the extended axis of the dimer. Theoretically, we investigate the distances over which the dimers couple and find this to be particularly plasmon mode dependent. The anisotropic morphology and sharp apexes contribute significantly to the orientational dependence of the interparticle couplings and field properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗