Engineering Papers⌕ Search

Engineering topics

Sharon Rodier

Publications and source records attributed to Sharon Rodier.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Wind Profiling With the Airborne Doppler Aerosol Wind Lidar During the 2022 Convective Processes Experiment

The 2017 Decadal Survey for Earth Science and Applications from Space (ESAS 2017) identifies a critical need for improving our understanding of Planetary Boundary Layer (PBL) processes and air-surface fluxes as well as why clouds, convection, and heavy precipitation occur when and where they do. Lidars are uniquely capable of collecting high precision and high spatio-temporal observations that have been used for atmospheric process studies from the ground, aircraft, and space. The wind lidar team at the NASA Langley Research Center (LaRC) started the development of Doppler wind lidar more than a decade ago to demonstrate technologies required for an Earth-orbiting system to globally measure wind profiles. Since then, an airborne Doppler Aerosol WiNd (DAWN) lidar system has been developed and participated in a series of field campaigns. The Doppler Aerosol WiNd (DAWN) lidar uses atmospheric aerosol motion to derive vertical profiles of horizontal wind speed and direction beneath the aircraft. In September 2022, DAWN, along with a suite of other instruments, was flown on a NASA DC-8 as part of The Convective Processes EXperiment – Cabo Verde (CPEX-CV) field campaign. A main objective of CPEX was to obtain a comprehensive set of temperature, humidity and, particularly, wind observations over tropical waters in undisturbed conditions, Saharan dust outbreaks, and in the vicinity of scattered through organized deep convection in all phases of the convective life cycle. DAWN collected data for approximately 90 hours across 13 CPEX-CV science flights. Airborne Vertical Atmospheric Profiling System (AVAPS) dropsondes were dropped throughout the flight for profiling the atmosphere and validating the DAWN instrument. DAWN had co-located data with 347 AVAPS NRD41 dropsondes, providing 32,117 vertical levels for a comprehensive validation of DAWN wind retrievals. DAWN showed very good agreement with dropsondes of ~0.2 m/s bias and ~1.8 m/s RMS. Given this agreement, DAWN is considered to be a worthy reference dataset, and its retrievals have been compared to winds derived from GOES Atmospheric Motion Vectors (AMVs), Advanced Scatterometer winds (ASCAT), and model data from GFS, GEOS, and MERRA-2 to better understand the quality of our current models and satellite wind observations. The proposed presentation will provide a brief description of the DAWN instrument, discuss the synergistic observations collected across a wide range of atmospheric conditions sampled during the CPEX-CV flights, and a summary of comparisons between DAWN, GOES AMV, ASCAT, and model analyses/predictions, with an emphasis on the PBL.

DAWN↗
NASA NTRS2023

Cloud - Aerosol LIDAR Infrared Pathfinder Satellite Observations (CALIPSO) - Data Management System: Data Products Catalog V4.95

The CALIPSO V4.51 Lidar Level 1 and Level 2 data product is an updated version of an already order-able dataset. The changes were signed off by the CALIPSO Configuration Control Board, versioned, and the code uploaded to a code repository. There is no ITAR/SBU data or code associated with this product. Data will be publicly order-able at the NASA LaRC Atmospheric Sciences Data Center (ASDC). All documentation and web sites will be made public once the data product is released. The data is in HDF4 format and will be generated for majority of the mission (June 2006 - August 2023). The attached Data Products Catalog (v4.95) describes the content of these new data products.

Mark Vaughan↗
NASA NTRS2023

Polarization Calibration Using Solar Radiation Background Signal Scattered from Dense Cirrus Clouds in the Visible and Ultraviolet Wavelength Regimes

In this presentation we describe the application of a previously developed technique that is now being used to correct the daytime polarization calibration of the CALIPSO lidar. The technique leverages the fact that the solar radiation background signals from dense cirrus clouds are largely unpolarized due to the internal multiple reflections within the non-spherical ice particles and the multiple scattering that occurs among these particles. Therefore, the ratio of polarization components of the cirrus background signals provides a good estimate for the polarization gain ratio (PGR) of the lidar. Using airborne backscatter lidar measurements, this technique was demonstrated to work well in the infrared regime. However, in the visible and ultraviolet regime, the molecular contribution is too large to be ignored, and thus corrections must be applied to account for the highly polarizing characteristics of the molecular scattering. Ignoring molecular scattering contributions can cause PGR errors of 2-3% at 532 nm, where the CALIPSO lidar makes its depolarization measurement. Because of the wavelength dependence of -4 of the molecular scattering, the PGR error can be even larger at the 355 nm wavelength that will be used by ESA’s EarthCARE lidar. To correct the molecular scattering contributions to the lidar received solar background signal, a look-up table has been created using a polarization-sensitive radiative transfer model. This presentation describes the theory and implementation of the molecular scattering correction.

Zhaoyan Liu↗
NASA NTRS2022

Cloud Aerosol LIDAR Infrared Pathfinder Satellite Observations (CALIPSO) - Data Management - Data Products Catalog V4.94

The CALIPSO V2.00 Lidar Level 2 Polar Stratospheric Cloud data product is an updated version of an already order-able dat set. The changes were signed off by the CALIPSO Configuration Control Board, versioned, and the code uploaded to a code repository. There is no ITAR/SBU data or code associated with this product. Data will be publicly order-able at the NASA LaRC Atmospheric Sciences Data Center (ASDC). All documentation and web sites will be made public once the data product is released. The data is in HDF4 format and will be generated for majority of the mission (June 2006 - March 2021). The attached Data Products Catalog (v4.94) describes this new product in section 2.14, pp 115- 119.

Mark Vaughan↗
NASA NTRSDate not supplied

An Overview of the NASA ADM-Aeolus Cal/Val Test Flight Campaign

Lidars are uniquely capable of collecting high precision and high spatio-temporal observations that have been used for atmospheric process studies from the ground, aircraft, and space for over 30 years. The Atmospheric Dynamics Mission Aeolus (ADM-Aeolus), the first-ever spaceborne Doppler wind lidar, was developed by the European Space Agency and launched in August 2018. The ADM-Aeolus Atmospheric Laser Doppler Instrument (ALADIN) observes profiles of the component of the wind vector and aerosol optical properties along the instrument’s line-of-sight direction on a global scale. Two airborne lidar systems have been developed at NASA Langley Research Center in recent years that collect measurements in support of several NASA Earth Science Division focus areas. The Doppler Aerosol WiNd (DAWN) lidar measures vertical profiles of horizontal wind speed and direction. The High Altitude Lidar Observatory (HALO) measure high resolution profiles of atmospheric water vapor (WV) and aerosol and cloud optical properties. Though new space-based missions with advanced capabilities such as Aeolus are continuously being conceived and developed, there are limitations in terms of spatial and vertical detail and measurement precision that can be accomplished from space, thus airborne remote sensing observations like those from DAWN and HALO are required to fill these observational gaps as well as to calibrate and validate space-based measurements. Over a two-week period in April 2019 during their Aeolus Cal/Val Test Flight campaign, NASA conducted five research flights over the Eastern Pacific Ocean with the DC-8 aircraft to 1) demonstrate the DAWN Doppler wind lidar, HALO high spectral resolution lidar aerosol/cloud measurement and differential absorption lidar WV measurement capabilities across a range of atmospheric conditions, 2) demonstrate Aeolus Cal/Val flight strategies and compare DAWN and HALO measurements with Aeolus to gain an initial perspective of Aeolus performance, and 3) demonstrate how atmospheric dynamic processes can be resolved and better understood through simultaneous observations of wind, WV, and aerosol profile observations, coupled with numerical model and other remote sensing observations. This paper provides a brief description of the DAWN and HALO instruments, discusses the synergistic observations collected across a wide range of atmospheric conditions sampled during the DC-8 flights, and a summary of the validation of DAWN, HALO, and Aeolus observations and comparisons.

Kristopher M. Bedka↗
NASA NTRSDate not supplied

Creating Seasonal Climatologies of Aerosol Lidar Ratios Over Ocean Using MODIS AOD Constrained Retrievals and GOCART Model Simulations

The current CALIPSO algorithms assign one lidar ratio (i.e., extinction-to-backscatter ratio; LR) value globally for each of the seven tropospheric aerosol types. In a future data products release, the CALIPSO project aims to improve these algorithms through the development of regional and seasonal LR climatologies. In this work, aerosol LRs are inferred through CALIOP backscatter profiles constrained by collocated aerosol optical depth (AOD) from Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) data. This analysis is subsampled for those profiles that are cloud-free and contain only one CALIOP-classified aerosol type (e.g., marine). The CALIOP profiles are then collocated with aerosol volume fractions obtained through Goddard Chemistry Aerosol Radiation and Transport (GOCART) model simulations. In this poster, we show twelve-year (June 2006-August 2018) mean spatial distributions of inferred aerosol LRs for CALIOP-classified marine aerosols and how they correspond inversely with patterns of GOCART sea salt volume fraction (SSVF). Near land masses, smaller SSVFs and larger LRs are found (due to the influence of over-land aerosols). In the remote ocean regions (likely less impacted by over-land aerosols), larger SSVFs and smaller LRs are found. The developed relationship between the GOCART model SSVFs and MODIS AOD constrained LRs is used to create model-assisted seasonal LR maps. Additionally, we show maps of inferred LRs from constrained retrievals using the CALIPSO Ocean Derived Column Optical Depth (ODCOD) product and comparisons with those from the MODIS analyses. The technique demonstrated here benefits CALIPSO in the near-term, but similar methods can also be applied to the next generation space-based elastic backscatter lidars with collocated passive sensors, such as those of the upcoming NASA Atmosphere Observing System (AOS).

Travis Toth↗
NASA NTRSDate not supplied

Calipso Data Product Status

In this poster we review the recent data releases by the CALIPSO project since the last CALIPSO/CloudSat science team meeting and near-term data products scheduled to be publicly available in the coming months. The recent releases include a full suite of new V4.51 Lidar Level 2 data products (June 2023) and corresponding browse images, as well as V4.51 IIR Level 2 (October 2023) data products. Two new Lidar Level 0 data products and both an updated (V2-Antartica) and new (V1-Greenland) version of the Lidar Level 2 Blowing Snow products are scheduled in the fall. A new Lidar Level 2 Ocean product, which provides global observations of subsurface properties, is scheduled for release in the winter. In addition, with the end of the CALIPSO science operations that occurred on August 1, 2023, we will present the last planned efforts for the next two years and summarize the final planned data releases.

Brian Getzewich↗
NASA NTRSDate not supplied

Airborne HSRL Assessment of CALIOP Aerosol Extinction Retrievals Constrained by Column AOD

Current operational CALIOP aerosol extinction profile retrievals usually rely on accurately specifying the relationship between aerosol extinction and backscattering (i.e. lidar ratio). Uncertainties in the assigned lidar ratios are typically the largest source of systematic error (~30-50%) in the CALIOP retrievals of aerosol extinction, backscatter, and aerosol optical depth. Alternatively, column aerosol optical depth (AOD) can be used to solve the lidar equation and obtain column-equivalent lidar ratios and retrieve aerosol extinction profiles from the CALIOP attenuated backscatter profiles. These derived lidar ratios correspond to the aerosols in the altitude range from 0-7 km. We derive column-equivalent aerosol lidar ratios and aerosol extinction profiles from CALIOP attenuated backscatter profiles constrained using co-located column AODs provided by several instruments/techniques: Synergized Optical Depth of Aerosols (SODA), Ocean-Derived Column Optical Depths (ODCOD), MODIS (dark target), MODIS (Multi-Angle Implementation of Atmospheric Correction-MAIAC), and PARASOL (Generalized Retrieval of Aerosol and Surface Properties-GRASP). These various retrievals of AOD and the column-average aerosol lidar ratios and aerosol extinction profiles derived from CALIOP using these AOD constraints are evaluated using the extensive record of coincident and co-located airborne HSRL measurements of AOD, aerosol lidar ratio, and aerosol extinction profiles acquired during more than 140 HSRL underflights of CALIPSO since 2006. The HSRL technique allows for the independent measurement of extinction and backscatter without the need for external constraints or assumptions regarding the lidar ratios. Initial comparisons with these coincident HSRL aerosol extinction profiles show that the CALIOP aerosol extinction profiles retrieved using these various AOD constraints are generally in better agreement with the HSRL measurements than aerosol extinction profiles from the operational techniques. The quality of agreement depends on the accuracy and magnitude of the AOD constraint. We present these comparisons of AOD, column aerosol lidar ratio, and aerosol extinction profiles for each of the AOD constraints described above.

lidar↗
NASA NTRSDate not supplied

Mapping Aerosol Lidar Ratios Over Ocean Using Constrained Retrievals and A Global Aerosol Model

The current NASA Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) algorithms assign one lidar ratio (i.e., extinction-to-backscatter ratio; LR) value globally for each of the seven tropospheric aerosol types. In a future data products release, the CALIPSO project aims to improve these algorithms through the development of regional and seasonal LR climatologies. In this work, aerosol LRs are inferred through Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) backscatter profiles constrained by collocated aerosol optical depth (AOD) from Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) data. This analysis is subsampled for those profiles that are cloud-free and contain only one CALIOP-classified aerosol type (e.g., marine). The CALIOP profiles are then collocated with aerosol volume fractions obtained through Goddard Chemistry Aerosol Radiation and Transport (GOCART) model simulations. In this presentation, we show that the twelve-year (June 2006-August 2018) mean spatial distributions of inferred aerosol LRs for CALIOP-classified marine aerosols correspond inversely with patterns of GOCART sea salt volume fraction (SSVF). For example, smaller SSVFs (< 65%) and larger LRs (> 55 sr), are found near land masses. This is indicative of the influence of over-land aerosols (e.g., pollution and biomass burning smoke). In the remote oceans (i.e., regions likely less impacted by non-sea salt aerosols), larger SSVFs (> 95%) and smaller LRs (< 25 sr) are found. The developed relationship between the GOCART SSVFs and MODIS AOD constrained LRs (polynomial fit intersect values of ~56 sr for SSVF of 0% and ~21 sr for SSVF of 100%) is used to produce model-assisted climatological LR maps on seasonal scales. Additionally, we show maps of inferred LRs from constrained retrievals using the CALIPSO Ocean Derived Column Optical Depth (ODCOD) product and comparisons with those from the MODIS analyses. The technique demonstrated in this study not only benefits CALIPSO in the near-term, but similar methods can be applied to future spaceborne elastic backscatter lidars with collocated passive sensors, such as those associated with the upcoming NASA Atmosphere Observing System (AOS).

Travis Toth↗