Engineering Papers⌕ Search

Engineering topics

Shaftan, Timur

Publications and source records attributed to Shaftan, Timur.

51 records · Page 3

Modification of the Booster Extraction Straight Section

In the process of conceptual design of the NSLS-II booster we developed an extraction layout based on a single strong pulsed septum turning the beam outside the booster vacuum chamber. This layout may not be ideal since pulsed power supply is not reproducible and its shot-to-shot voltage fluctuations will lead to an increase in the effective emittance of the extracted beam. Alternative solution1 is to divide the extraction in two magnets – a weak pulsed magnet and a strong DC magnet. This concept has been implemented in the current extraction layout.

42 ENGINEERING↗

Concept of the Complex Bend

Modern synchrotron lattices follow Multi-­Bend Achromat approach and realize low emittance by arranging small horizontal beta-­function and dispersion in the bends. In this paper we propose another optics solution aimed to reach low emittance by using a lattice element that we named as “Complex Bend”. The Complex Bend corresponds to a strong alternate focusing distributed along the bend so to maintain the beta-function and dispersion oscillating at low values. Comprising the ring lattice out of Complex Bends instead of regular dipoles will minimize the Ң-­function and reduce the horizontal emittance while localizing bending to a small fraction of the storage ring circumference. The latter should help to gain more space for Insertion Devices. In the following, we present the concept of Complex Bend, considerations on the choice of its optimal parameters, as well as, thoughts of its practical realization. This paper gives a snapshot where our current studies stand and does not pretend to be a complete description of the Complex Bend engineering design and integration of this element into a specific ring lattice.

36 MATERIALS SCIENCE↗

Operation of the NSLS-II Injector with a Lower Booster Injection Energy

The NSLS-II injector consists of a 200 MeV linac and a 3 GeV full-energy booster synchrotron. The linac contains five traveling-wave S-band accelerating structures driven by two high-power klystrons. Optimization of the NSLS-II injector has continued since user operation started in October 2014. Beam losses have been minimized by the injector tuning and stabilization, and high level software has been developed to characterize the booster and injection parameters. However, due to the recently increased frequency of klystrons arcing which shortens the lifetime of the klystron, operation of the linac with lowered klystron output power would allow injection to be maintained with fewer trips and extended lifetime of klystrons. Apart from the energy difference, the low energy klystron operation is quite similar to the nominal 200 MeV operation. Injection trials were carried out with scaled magnet settings of the linac, linac-to- booster (LtB) transport line, and the booster. The beam was successfully injected into the booster on May 31, 2017 at the low energy mode of the 170 MeV LtB injection. Overall transfer efficiency from the linac to the storage ring is identical to the standard 200 MeV operation. The 170 MeV injection mode has been adopted in NSLS-II user operation ever since the beam study. In the most recent injector studies on June 28 and July 3, 2017, the booster injection energy was further decremented to the final target value of 100 MeV via applying the same method established in the 170 MeV operation. The ultimate value of 100 MeV is determined by the special requirement of operating the injector at single klystron while repairing the other klystron or with two klystrons with significantly reduced outputs for the purpose of maximizing klystron lifetimes.

36 MATERIALS SCIENCE↗

Modeling of Transition Through Half-Integer Resonance

In our recent experiment we measured the increase in the betatron oscillation amplitude due to crossing half-integer resonance by the beam while it performed synchrotron oscillations at NSLS-II. In this note we derive solutions of the equation of motion for a particle crossing ½ resonance and check these numerically against analytic solutions for the static detuning. We start our derivation from the first principles, i.e. from the Hill’s equation.

36 MATERIALS SCIENCE↗

Initial performances of first undulator-based hard x-ray beamlines of NSLS-II compared to simulations

Commissioning of the first X-ray beamlines of NSLS-II included detailed measurements of spectral and spatial distributions of the radiation at different locations of the beamlines, from front-ends to sample positions. Additionally, comparison of some of these measurement results with high-accuracy calculations of synchrotron (undulator) emission and wavefront propagation through X-ray transport optics, performed using SRW code, is presented.

47 OTHER INSTRUMENTATION↗

Rapid Crossing of a Resonance During Tune Modulation by Synchrotron Oscillations

It had become a standard practice to constrain the particle’s tune footprint while designing the ring lattice so that the particle tunes fit between harmful resonances that limit ring dynamic aperture (DA). This approach, known as “tune confinement”, puts tight limits on the magnitude of the tune shifts with amplitude and with momentum. The latter requires labor-intensive optimization of the off-energy dynamic aperture and control over the corresponding tune footprint for the large energy deviations and is a prerequisite to achieving reasonable lifetime if it is dominated by the Touschek scattering. As nonlinearities of the modern ring lattices are much enhanced as compared with the previous generation of synchrotron light sources, it is becoming more and more difficult to keep the off-momentum tune footprint confined. While one could reach reasonable on-energy DA suitable for injection into the machine, the off-energy DA optimization is much more complex and needs to satisfy more constraints so to reach large energy acceptance and secure decent lifetime at the high ring current. In certain cases when the lattice solution with the confined off-energy tune footprint cannot be found, one may ask whether crossing of a resonance stopband from off-momentum particle will lead to loss of this particle. Intuitively, if the particle crosses the stopband quickly, one may expect that the betatron oscillation amplitude will not increase substantially thereby keeping the particle within the machine acceptance. At the same time the tight tolerances of the modern lattice elements as designed and produced afford much narrower resonance stopbands being compared with the machines built decades ago. Under these circumstances the question above may be asked as what are the conditions for operating a ring with a large chromatic tune footprint, which crosses resonances, while not observing particle losses. In this paper we try to answer the questions above by studying the model of a particle with large initial momentum deviation (as, for example, driven by the Touschek scattering event), which crosses stopband of a half-integer resonance while executing synchrotron oscillations in the highly chromatic ring lattice.

36 MATERIALS SCIENCE↗

Reviewed Approach to Defining the Active Interlock Envelope for Front End Ray Tracing

To protect the NSLS-II Storage Ring (SR) components from damage from synchrotron radiation produced by insertion devices (IDs) the Active Interlock (AI) keeps electron beam within some safe envelope (a.k.a Active Interlock Envelope or AIE) in the transverse phase space. The beamline Front Ends (FEs) are designed under assumption that above certain beam current (typically 2 mA) the ID synchrotron radiation (IDSR) fan is produced by the interlocked e-beam. These assumptions also define how the ray tracing for FE is done. To simplify the FE ray tracing for typical uncanted ID it was decided to provide the Mechanical Engineering group with a single set of numbers (x,x’,y,y’) for the AIE at the center of the long (or short) ID straight section. Such unified approach to the design of the beamline Front Ends will accelerate the design process and save valuable human resources. In this paper we describe our new approach to defining the AI envelope and provide the resulting numbers required for design of the typical Front End.

36 MATERIALS SCIENCE↗

NSLS-II SR Commissioning Report

The NSLS-II storage ring (SR) phase I commissioning has been successfully completed in May 12, 2014. In accordance to the project milestone, 25 mA average current was achieved in the storage ring with PETRA III 500 MHz 7-cell PETRA-III RF cavity but w/o ID’s and Landau cavities. In about 5 weeks we delivered a 3 GeV beam to the ring injection straight section, made the 1st turn around the ring, achieved hundreds of turns optimizing injection, stored beam having sextupoles and RF turned ON. Injection efficiency was achieved 95%, close orbit rms value is ~100 um, tune and chromaticity were measured and adjusted as desired, and beam lifetime was a few hours depending on the stored beam current. This report consists of a summary, a chronological part, the injector system performance in Ch3, SR commissioning experience in Ch4 and the outlook of remaining work in Ch5. The SR commissioning experience includes the software experience, hardware (timing, diagnostics, RF, vacuum, PS) operation experience, the strategy for initial injection beam to the stored beam, measurement of the linear optics and control to the desired value, nonlinear beam dynamics study, beam instability study, the subsystem reliability and fault study at different scenarios.

36 MATERIALS SCIENCE↗

NSLS-II Emittance and Lifetime with Damping Wigglers

This paper is focused on the measurements of the major machine parameters under influence of the Damping Wigglers and their comparison with analytic estimates. We present analysis of the impact of the Damping Wigglers on the beam emittance and lifetime in the NSLS-II storage ring. We conclude that these parameters for the NSLS-II follow well-known dependencies as described, for example, by Weidemann and Touschek. Appendices A and B show details of the experiment and the estimates.

36 MATERIALS SCIENCE↗

Maximum Current of the NSLS-II Linac

The maximum current of the NSLS-II linac is an important operational parameter for determining the safety envelope of the acceleration. In this document we establish the maximum current of the NSLS-II linac. First we establish the maximum current that can be emitted by the gun and the parameters that limit this. Then we show that beam loading in the linac further limits the current available at the exit of the linac. Beam loading also determines the energy spectrum of the beam at the end of the linac. Once the maximum current at the exit of the linac is established, we transport this beam through the linac to booster transport line using the designed optics which will match the beam from the linac into the booster. This will determine the maximum current that can be delivered to the booster accelerator from the linac.

36 MATERIALS SCIENCE↗

Assessment of the Heat Load on the NSLS-II Storage Ring Septum Chamber

The NSLS-II pulsed septum will be used for injecting intense flux of electrons into the Storage Ring (SR). The septum vacuum system contains a long vacuum chamber of quite complex shape and tight tolerances for the temperature rise. In this Technical Note we assess maximum amounts of the heat load on the chamber walls from different heat sources present in the chamber’s environment. At the end of this note we draw conclusions on the expected septum heat loads and discuss the ways to protect the chamber from overheating.

36 MATERIALS SCIENCE↗

Parameters and Tolerances for the Booster Dipole Power Supplies

In this technical note we discuss the parameters and tolerances for the booster dipole power supplies. We first discuss the requirements on the current ramp profile for the cases of energy ramps at 1 and 2 Hz. Then we determine the voltage waveforms that correspond to these current ramps. Using the booster magnet lattice and the actual power supply circuit layouts we then calculate the orbit distortion and tune spread caused by the magnetic field amplitude errors in the combined‐function dipole magnets at the time of injection and extraction and establish the requirements on the value of the magnetic field amplitude errors at these points along the ramp. We then conclude the note by translating these requirements into the amplitude and time tolerances for the dipole power supplies.

36 MATERIALS SCIENCE↗

NSLS-II Booster Design

The NSLS-II booster is required to produce a 3 GeV bunch train with an accelerated charge of about 10 nC at a repetition rate of 1 Hz and a horizontal beam emittance around 40 nm-rad. Injection into the booster ring takes place at an energy of 200 MeV. The booster magnetic field and RF voltage are ramped for 500 ms to accelerate the electron beam from the injection energy to the nominal energy of 3 GeV. At the maximum field of the ramp, the electron beam is extracted from the booster and injected into the Storage Ring. We allow for a maximum beam loss of 30% during injection, 20% maximum loss during extraction. Thus the charge to be accelerated in the booster is 10 nC which corresponds to an average beam current of 20 mA. Since the dynamic aperture of the storage ring is limited, the quality of the injected beam has received serious consideration. In particular, the booster emittance may impact the injection efficiency. As the beam intensity in the storage ring is intended to be quasi-constant by frequently (once per minute) injecting beam into the storage ring (top-off injection) good injection efficiency is mandatory to minimize the frequency of top-off cycles, radiation dose induced by the lost electrons and perturbations of the stored beam orbit driven by the injection transients. During the last 10 years, many 3 rd generation synchrotron light facilities have been put into operation. Nearly all of these facilities have chosen a full energy booster synchrotron as an injector together with a low energy linac as pre-injector.

43 PARTICLE ACCELERATORS↗