Engineering Papers⌕ Search

Engineering topics

Serovy, G. K.

Publications and source records attributed to Serovy, G. K..

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Modeling the 3-D flow effects on deviation angle for axial compressor middle stages

A model of the spanwise variation of the three-dimensional flow effects on deviation is proposed for middle-stage rotors and stators. This variation is taken as the difference above or below that predicted by blade element theory at any spanwise location. It was found that the stator variation is strongly affected by the end-wall boundary-layer thickness as well as camber, solidity, and blade channel aspect ratio. Rotor variation was found to depend on end-wall boundary layer thickness and tip clearance normalized by blade span. If these parameters are known or can be calculated, the models provide a reasonable approximation to the spanwise variation of deviation for middle compressor stages operating at low to high subsonic inlet Mach numbers.

Roberts, W. B.↗
NASA NTRS1980

Aerodynamics of advanced axial-flow turbomachinery

A multi-task research program on aerodynamic problems in advanced axial-flow turbomachine configurations was carried out at Iowa State University. The elements of this program were intended to contribute directly to the improvement of compressor, fan, and turbine design methods. Experimental efforts in intra-passage flow pattern measurements, unsteady blade row interaction, and control of secondary flow are included, along with computational work on inviscid-viscous interaction blade passage flow techniques. This final report summarizes the results of this program and indicates directions which might be taken in following up these results in future work. In a separate task a study was made of existing turbomachinery research programs and facilities in universities located in the United States. Some potentially significant research topics are discussed which might be successfully attacked in the university atmosphere.

Serovy, G. K.↗
NASA NTRS1979

Axial-flow compressor turning angle and loss by inviscid-viscous interaction blade-to-blade computation

A method for computation of the flow field around an arbitrary airfoil cascade on an axially symmetric blade-to-blade surface was developed which takes into account the development and separation of the blade surface boundary layers and mixing in the wake. The method predicts the overall fluid turning and total pressure loss in the context of an inviscid-viscous interaction scheme. The inviscid flow solution is obtained from a compressible flow matrix method. The viscous flow is obtained from a differential boundary layer method which calculates laminar, transitional and turbulent boundary layers. Provisions for the calculation of laminar and turbulent separation regions were added to the viscous scheme. The combined inviscid-viscous interaction scheme described yields results which are quantitatively consistent with experimental data. This suggests that the physical basis for the interactive system is correct and justifies continued exploration and use of the method.

Hansen, E. C.↗
NASA NTRS1975

Axial-flow pump blade-element loss and deviation angle prediction

Determination of blade row fluid flow total-pressure loss and turning distributions in an axial-flow pump over a range of operating conditions is discussed. Included are a review of related research, correlations of pump rotor data and the results obtained using these data correlations with a computer program for pump off-design performance prediction. A number of the important problems related to determining fluid loss and turning information in a turbomachine and some of the consequences of imprecise prediction are pointed out.

Okiishi, T. H.↗
NASA NTRS1974

Data summary and computer program for axial-flow pump rotor performance

Assembly of noncavitating blade element performance data for axial-flow pump rotor configurations has been collected and organized. Program facilitates handling large amounts of experimental data involved and may be used as data reduction program to process flow and performance measurements from other axial-flow pump configurations.

Miller, M. J.↗
NASA NTRS1974

Deviation angle estimation for axial-flow compressors using inviscid flow solutions

Development of a more satisfactory method of estimating deviation angles was attempted using analytical procedures. Solutions for inviscid, irrotational flow in the blade-to-blade plane were obtained with a finite-difference calculation method. Deviation angles for three cascades with rounded trailing edges were estimated using the inviscid flow solutions and four existing trailing edge hypotheses. The estimated deviation angles were compared with experimental values for a range of incidence angle and inlet flow angle. None of the hypotheses were satisfactory at all incidence angles for all the cascades considered. An alternative hypothesis is presented which is suitable for one of the cascade profiles over a range of incidence and blade setting angle.

Miller, M. J.↗
NASA NTRS1973

Prediction of overall and blade-element performance for axial-flow pump configurations

A method and a digital computer program for prediction of the distributions of fluid velocity and properties in axial flow pump configurations are described and evaluated. The method uses the blade-element flow model and an iterative numerical solution of the radial equilbrium and continuity conditions. Correlated experimental results are used to generate alternative methods for estimating blade-element turning and loss characteristics. Detailed descriptions of the computer program are included, with example input and typical computed results.

Serovy, G. K.↗
NASA NTRS1973

Design of a miniature hydrogen fueled gas turbine engine

The design, development, and delivery of a miniature hydrogen-fueled gas turbine engine are discussed. The engine was to be sized to approximate a scaled-down lift engine such as the teledyne CAE model 376. As a result, the engine design emerged as a 445N(100 lb.)-thrust engine flowing 0.86 kg (1.9 lbs.) air/sec. A 4-stage compressor was designed at a 4.0 to 1 pressure ratio for the above conditions. The compressor tip diameter was 9.14 cm (3.60 in.). To improve overall engine performance, another compressor with a 4.75 to 1 pressure ratio at the same tip diameter was designed. A matching turbine for each compressor was also designed. The turbine tip diameter was 10.16 cm (4.0 in.). A combustion chamber was designed, built, and tested for this engine. A preliminary design of the mechanical rotating parts also was completed and is discussed. Three exhaust nozzle designs are presented.

Burnett, M.↗
NASA NTRS1973

Summary of design and blade-element performance data for 12 axial-flow pump rotor configurations

A collection of noncavitating blade-element performance data for 12 axial-flow pump rotor configurations is presented in tabular form. Rotor design philosophy, test apparatus and procedure, and data reduction and evaluation are discussed. A data storage and recall computer program is described. All but one of the rotor configurations considered were composed of double-circular-arc blade sections and were designed for high inlet relative flow angles. Hub-tip radius ranged from 0.40 to 0.90.

Miller, M. J.↗