Engineering topics

Seraji, Homayoun

Publications and source records attributed to Seraji, Homayoun.

At least 55 records · Page 3

NASA NTRS1992

Kinematic analysis of 7-DOF manipulators

This article presents a kinematic analysis of seven-degree-of-freedom serial link spatial manipulators with revolute joints. To uniquely determine the joint angles for a given end-effector position and orientation, the redundancy is parameterized by a scalar variable that defines the angle between the arm plane and a reference plane. The forward kinematic mappings from joint space to end-effector coordinates and arm angle and the augmented Jacobian matrix that gives end-effector and arm angle rates as functions of joint rates are presented. Conditions under which the augmented Jacobian becomes singular are also given and are shown to correspond to the arm being either at a kinematically singular configuration or at a nonsingular configuration for which the arm angle ceases to parameterize the redundancy.

Kreutz-Delgado, Kenneth↗

NASA NTRS1992

Obstacle avoidance for redundant robots using configuration control

A redundant robot control scheme is provided for avoiding obstacles in a workspace during the motion of an end effector along a preselected trajectory by stopping motion of the critical point on the robot closest to the obstacle when the distance between is reduced to a predetermined sphere of influence surrounding the obstacle. Algorithms are provided for conveniently determining the critical point and critical distance.

Seraji, Homayoun↗

NASA NTRS1992

Direct Adaptive Control Of An Industrial Robot

Decentralized direct adaptive control scheme for six-jointed industrial robot eliminates part of overall computational burden imposed by centralized controller and degrades performance of robot by reducing sampling rate. Control and controller-adaptation laws based on observed performance of manipulator: no need to model dynamics of robot. Adaptive controllers cope with uncertainties and variations in robot and payload.

Seraji, Homayoun↗

NASA NTRS1992

Task-based configuration control of redundant manipulators

This article establishes new goals for redundancy resolution based on manipulator dynamics and end-effector characteristics. These goals can be accomplished by employing the recently developed configuration control approach. Redundancy resolution is achieved by controlling the joint inertia matrix or the end-effector mass matrix that affect the inertial torques or by reducing the joint torques due to gravity loading and payload. The manipulator mechanical advantages and velocity ratio are also used as performance measurements to be improved by proper utilization of redundancy. Furthermore, end-effector compliance, sensitivity, and impulsive force at impact are introduced as redundancy-resolution criteria. The new goals for redundancy resolution presented in this article allow a more efficient utilization of the redundant joints based on the desired task requirements. Simple case studies using computer simulations are described for illustration.

Seraji, Homayoun↗

NASA NTRS1992

Configuration control of seven-degree-of-freedom arms

A seven degree of freedom robot arm with a six degree of freedom end effector is controlled by a processor employing a 6 by 7 Jacobian matrix for defining location and orientation of the end effector in terms of the rotation angles of the joints, a 1 (or more) by 7 Jacobian matrix for defining 1 (or more) user specified kinematic functions constraining location or movement of selected portions of the arm in terms of the joint angles, the processor combining the two Jacobian matrices to produce an augmented 7 (or more) by 7 Jacobian matrix, the processor effecting control by computing in accordance with forward kinematics from the augmented 7 by 7 Jacobian matrix and from the seven joint angles of the arm a set of seven desired joint angles for transmittal to the joint servo loops of the arm. One of the kinematic functions constraints the orientation of the elbow plane of the arm. Another one of the kinematic functions minimizes a sum of gravitational torques on the joints. Still another kinematic function constrains the location of the arm to perform collision avoidance. Generically, one kinematic function minimizes a sum of selected mechanical parameters of at least some of the joints associated with weighting coefficients which may be changed during arm movement. The mechanical parameters may be velocity errors or gravity torques associated with individual joints.

Seraji, Homayoun↗

NASA NTRS1991

Robust high-performance control for robotic manipulators

Model-based and performance-based control techniques are combined for an electrical robotic control system. Thus, two distinct and separate design philosophies have been merged into a single control system having a control law formulation including two distinct and separate components, each of which yields a respective signal component that is combined into a total command signal for the system. Those two separate system components include a feedforward controller and a feedback controller. The feedforward controller is model-based and contains any known part of the manipulator dynamics that can be used for on-line control to produce a nominal feedforward component of the system's control signal. The feedback controller is performance-based and consists of a simple adaptive PID controller which generates an adaptive control signal to complement the nominal feedforward signal.

Seraji, Homayoun↗

NASA NTRS1991

Self-Motion Manifolds Of Redundant Manipulators

New perspective on redundancy yields alternative control strategies. Self-motion manifolds introduced to characterization of self-motions of robotic manipulator having redundant degrees of freedom. Kinematics of robot reformulated via manifold mapping stressing global, rather than local, kinematic analysis. Approach useful in study of redundant manipulator kinematics. In addition, problem of resolution of redundancy posed equivalently as problem of control of self-motions, and self-motion manifolds useful in investigating, interpreting, and formulating both local and global techniques for resolution of redundancy.

Burdick, Joel W.↗

NASA NTRS1991

Dual-arm manipulators with adaptive control

The described and improved multi-arm invention of this application presents three strategies for adaptive control of cooperative multi-arm robots which coordinate control over a common load. In the position-position control strategy, the adaptive controllers ensure that the end-effector positions of both arms track desired trajectories in Cartesian space despite unknown time-varying interaction forces exerted through a load. In the position-hybrid control strategy, the adaptive controller of one arm controls end-effector motions in the free directions and applied forces in the constraint directions; while the adaptive controller of the other arm ensures that the end-effector tracks desired position trajectories. In the hybrid-hybrid control strategy, the adaptive controllers ensure that both end-effectors track reference position trajectories while simultaneously applying desired forces on the load. In all three control strategies, the cross-coupling effects between the arms are treated as disturbances which are compensated for by the adaptive controllers while following desired commands in a common frame of reference. The adaptive controllers do not require the complex mathematical model of the arm dynamics or any knowledge of the arm dynamic parameters or the load parameters such as mass and stiffness. Circuits in the adaptive feedback and feedforward controllers are varied by novel adaptation laws.

Seraji, Homayoun↗

NASA NTRS1991

Method and apparatus for configuration control of redundant robots

A method and apparatus to control a robot or manipulator configuration over the entire motion based on augmentation of the manipulator forward kinematics is disclosed. A set of kinematic functions is defined in Cartesian or joint space to reflect the desirable configuration that will be achieved in addition to the specified end-effector motion. The user-defined kinematic functions and the end-effector Cartesian coordinates are combined to form a set of task-related configuration variables as generalized coordinates for the manipulator. A task-based adaptive scheme is then utilized to directly control the configuration variables so as to achieve tracking of some desired reference trajectories throughout the robot motion. This accomplishes the basic task of desired end-effector motion, while utilizing the redundancy to achieve any additional task through the desired time variation of the kinematic functions. The present invention can also be used for optimization of any kinematic objective function, or for satisfaction of a set of kinematic inequality constraints, as in an obstacle avoidance problem. In contrast to pseudoinverse-based methods, the configuration control scheme ensures cyclic motion of the manipulator, which is an essential requirement for repetitive operations. The control law is simple and computationally very fast, and does not require either the complex manipulator dynamic model or the complicated inverse kinematic transformation. The configuration control scheme can alternatively be implemented in joint space.

Seraji, Homayoun↗

NASA NTRS1990

Increasing The Dexterity Of Redundant Robots

Redundant coordinates used to define additional tasks. Configuration control emerging as effective way to control motions of robot having more degrees of freedom than necessary to define trajectory of end effector and/or of object to be manipulated. Extra or redundant degrees of freedom used to give robot humanlike dexterity and versatility.

Seraji, Homayoun↗

NASA NTRS1990

Robust, High-Performance Control For Robotic Manipulators

Improved control scheme for robotic manipulators results from alternative approach to use of both model-based and performance-based control techniques. Includes feedforward controller and separate feedback controller. Feedforward controller model-based and contains any known part of dynamics of manipulator used to produce nominal control signal. Feedback controller performance-based; compensates for any unknown dynamics and uncertainties or variations in parameters of manipulator and/or payload.

Seraji, Homayoun↗

NASA NTRS1990

Minimal-Inversion Feedforward-And-Feedback Control System

Recent developments in theory of control systems support concept of minimal-inversion feedforward-and feedback control system consisting of three independently designable control subsystems. Applicable to the control of linear, time-invariant plant.

Seraji, Homayoun↗

NASA NTRS1990

Simplified Dynamic Control Of Redundant Manipulators

Simplified scheme proposed for dynamic control of robotic manipulator having redundant joints; that is, extra degrees of freedom beyond needed to perform task, to position and orient end effector at specified position and/or move it along specified trajectory. Extra degrees of freedom used to perform simultaneous subtask. Scheme adaptive and based on observed performance of manipulator. Involves neither complicated mathematical model of dynamics of manipulator nor time-consuming inverse kinematic transformation.

Seraji, Homayoun↗

NASA NTRS1990

Multivariable PID Controller For Robotic Manipulator

Gains updated during operation to cope with changes in characteristics and loads. Conceptual multivariable controller for robotic manipulator includes proportional/derivative (PD) controller in inner feedback loop, and proportional/integral/derivative (PID) controller in outer feedback loop. PD controller places poles of transfer function (in Laplace-transform space) of control system for linearized mathematical model of dynamics of robot. PID controller tracks trajectory and decouples input and output.

Seraji, Homayoun↗

NASA NTRS1990

Method For Model-Reference Adaptive Control

Relatively simple method of model-reference adaptive control (MRAC) developed from two prior classes of MRAC techniques: signal-synthesis method and parameter-adaption method. Incorporated into unified theory, which yields more general adaptation scheme.

Seraji, Homayoun↗

NASA NTRS1990

Output Control Using Feedforward And Cascade Controllers

Report presents theoretical study of open-loop control elements in single-input, single-output linear system. Focus on output-control (servomechanism) problem, in which objective is to find control scheme that causes output to track certain command inputs and to reject certain disturbance inputs in steady state. Report closes with brief discussion of characteristics and relative merits of feedforward, cascade, and feedback controllers and combinations thereof.

Seraji, Homayoun↗

NASA NTRS1989

Decentralized Adaptive Control For Robots

Precise knowledge of dynamics not required. Proposed scheme for control of multijointed robotic manipulator calls for independent control subsystem for each joint, consisting of proportional/integral/derivative feedback controller and position/velocity/acceleration feedforward controller, both with adjustable gains. Independent joint controller compensates for unpredictable effects, gravitation, and dynamic coupling between motions of joints, while forcing joints to track reference trajectories. Scheme amenable to parallel processing in distributed computing system wherein each joint controlled by relatively simple algorithm on dedicated microprocessor.

Seraji, Homayoun↗

NASA NTRS1989

Adaptive Control For Cooperative Dual Robot Arms

Three strategies proposed for adaptive control of two cooperative robot arms. New dual-arm control strategies implemented at low level of control hierarchy. Each arm operated independently under single-arm control scheme treating forces and torques transmitted through load as though disturbances. Yields promising results in numerical simulations, and general approach extended to greater numbers of arms.

Seraji, Homayoun↗