Engineering Papers⌕ Search

Engineering topics

Seo, Dong-Kyun

Publications and source records attributed to Seo, Dong-Kyun.

At least 19 records

Cooperative formation of porous silica and peptides on the prebiotic Earth

Significance Although catalysis by mineral surfaces has been considered to be important in prebiotic chemistry, the role of porous silica phases, with reactions taking place within specific confined environments, has not been explored. This paper proposes that structure direction through interaction of dissolved silica with organic species in aqueous solution produces porous silica catalysts for prebiotic organic reactions to form larger polymerized molecules, with possible control of chirality. This process may involve feedback and amplification if the organics produced by catalysis can also act as structure-directing agents for enhanced synthesis of the catalytic silica structures. To our knowledge, such structure direction and catalysis, though well known in materials science, have not been considered previously in the context of prebiotic chemistry.

58 GEOSCIENCES↗

Metal oxides from acidic solutions

Forming a metal oxide by treating an acidic solution containing a metal to yield a precursor in the form of a semi-liquid, semi-solid or solid, and treating the precursor to yield a product including the metal oxide. An organic or inorganic component may be combined with the precursor to yield a second semi-liquid, semi-solid or solid. The product may be treated to yield a new material. In some cases, the metal oxide has an empirical formula H.sub.xM.sub.2A.sup.1.sub.y-A.sup.2.sub.z, where M represents a transition metal or any combination of transition metals in Groups 3-12; A.sup.1 is a first oxyanion; A.sup.2 is a second oxyanion; 0.ltoreq.x.ltoreq.3; 0.ltoreq.y.ltoreq.3; 0.ltoreq.z.ltoreq.3; and y+z>0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geopolymer resin materials, geopolymer materials, and materials produced thereby

A product formed from a first material including a geopolymer resin material, a geopolymer material, or a combination thereof by contacting the first material with a fluid and removing at least some of the fluid to yield a product. The first material may be formed by heating and/or aging an initial geopolymer resin material to yield the first material before contacting the first material with the fluid. In some cases, contacting the first material with the fluid breaks up or disintegrates the first material (e.g., in response to contact with the fluid and in the absence of external mechanical stress), thereby forming particles having an external dimension in a range between 1 nm and 2 cm.

36 MATERIALS SCIENCE↗

Multifunctional materials and composites

Forming multifunctional materials and composites thereof includes contacting a first material having a plurality of oxygen-containing functional groups with a chalcogenide compound, and initiating a chemical reaction between the first material and the chalcogenide compound, thereby replacing oxygen in some of the oxygen-containing functional groups with chalcogen from the chalcogen-containing compound to yield a second material having chalcogen-containing functional groups and oxygen-containing functional groups. The first material is a carbonaceous material or a macromolecular material. A product including the second material is collected and may be processed further to yield a modified product or a composite.

36 MATERIALS SCIENCE↗

Accessing alkali-free NASICON-type compounds through mixed oxoanion sol–gel chemistry: Hydrogen titanium phosphate sulfate, H{sub 1−x}Ti{sub 2}(PO{sub 4}){sub 3−x}(SO{sub 4}){sub x} (x=0.5–1)

We report a direct sol–gel synthesis and characterization of new proton-containing, rhombohedral NASICION-type titanium compounds with mixed phosphate and sulfate oxoanions. The synthetic conditions were established by utilizing peroxide ion as a decomposable and stabilizing ligand for titanyl ions in the presence of phosphates in a strong acidic medium. Thermogravimetric analysis (TGA), powder X-ray diffraction (PXRD), induction-coupled plasma optical emission spectroscopic (ICP-OES) elemental analysis, and Raman and {sup 1}H magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopic studies have determined the presence of sulfate and proton ions in the structure, for which the compositional range has been found to be H{sub 1−x}Ti{sub 2}(PO{sub 4}){sub 3−x}(SO{sub 4}){sub x} (x=0.5–1). The particulate products exhibit a nanocrystalline nature observed through characterization with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The N{sub 2} sorption isotherm measurements and subsequent Brunauer–Emmett–Teller (BET) and Barrett–Joyner–Halenda (BJH) analyses confirmed the presence of the textural meso- and macropores in the materials. Future studies would determine the potential of the new compounds in various applications as battery materials, proton conductors and solid acid catalysts. - Graphical abstract: A series of proton-containing NASICON-type compounds, H{sub 1−x}Ti{sub 2}(PO{sub 4}){sub 3−x}(SO{sub 4}){sub x} (x=0.5–1), were discovered through a new sol–gel synthetic method that utilizes peroxide ion as a decomposable and stabilizing ligand for titanyl ions in the presence of phosphates in a strong acidic medium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocurrent Generation by Photosynthetic Purple Bacterial Reaction Centers Interfaced with a Porous Antimony-Doped Tin Oxide (ATO) Electrode

The ability to exchange energy and information between biological and electronic materials is critical in the development of hybrid electronic systems in biomedicine, environmental sensing, and energy applications. While sensor technology has been extensively developed to collect detailed molecular information, less work has been done on systems that can specifically modulate the chemistry of the environment with temporal and spatial control. The bacterial photosynthetic reaction center represents an ideal photonic component of such a system in that it is capable of modifying local chemistry via light-driven redox reactions with quantitative control over reaction rates and has inherent spectroscopic probes for monitoring function. Here we present a well-characterized model system, consisting of a transparent, porous electrode (antimony-doped tin oxide) which is electrochemically coupled to the reaction center via a cytochrome c molecule. Upon illumination, the reaction center performs the 2-step, 2-electron reduction of a ubiquinone derivative which exchanges with oxidized quinone in solution. Electrons from the electrode then move through the cytochrome to reoxidize the reaction center electron donor. The result is a facile platform for performing redox chemistry that can be optically and electronically controlled in time and space.

36 MATERIALS SCIENCE↗

Unusual Changes in Electronic Band-Edge Energies of the Nanostructured Transparent n-Type Semiconductor Zr-Doped Anatase TiO 2 (Ti 1– x Zr x O 2 ; x < 0.3)

By the establishment of highly controllable synthetic routes, electronic band-edge energies of the n-type transparent semiconductor Zr-doped anatase TiO 2 have been researched holistically for the first time up to 30 atom % Zr, employing powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, nitrogen gas sorption measurements, UV/vis spectroscopies, and Mott–Schottky measurements. The materials were produced through a sol–gel synthetic procedure that ensures good compositional homogeneity of the materials, while introducing nanoporosity in the structure, by achieving a mild calcination condition. Vegard’s law was discovered among the homogeneous samples, and correlations were established between the chemical compositions and optical and electronic properties of the materials. Up to 20% Zr doping, the optical energy gap increases to 3.29 eV (vs 3.19 eV for TiO 2 ), and the absolute conduction band-edge energy increases to -3.90 eV (vs -4.14 eV). Furthermore, the energy changes of the conduction band edge are more drastic than what is expected from the average electronegativities of the compounds, which may be due to the unnatural coordination environment around Zr in the anatase phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabricating porous materials using interpenetrating inorganic-organic composite gels

Porous materials are fabricated using interpenetrating inorganic-organic composite gels. A mixture or precursor solution including an inorganic gel precursor, an organic polymer gel precursor, and a solvent is treated to form an inorganic wet gel including the organic polymer gel precursor and the solvent. The inorganic wet gel is then treated to form a composite wet gel including an organic polymer network in the body of the inorganic wet gel, producing an interpenetrating inorganic-organic composite gel. The composite wet gel is dried to form a composite material including the organic polymer network and an inorganic network component. The composite material can be treated further to form a porous composite material, a porous polymer or polymer composite, a porous metal oxide, and other porous materials.

36 MATERIALS SCIENCE↗

Geopolymer resin materials, geopolymer materials, and materials produced thereby

A product formed from a first material including a geopolymer resin material, a geopolymer resin, or a combination thereof by contacting the first material with a fluid and removing at least some of the fluid to yield a product. The first material may be formed by heating and/or aging an initial geopolymer resin material to yield the first material before contacting the first material with the fluid. In some cases, contacting the first material with the fluid breaks up or disintegrates the first material (e.g., in response to contact with the fluid and in the absence of external mechanical stress), thereby forming particles having an external dimension in a range between 1 nm and 2 cm.

36 MATERIALS SCIENCE↗

Nanoporous Delafossite CuAlO 2 from Inorganic/Polymer Double Gels: A Desirable High-Surface-Area p-Type Transparent Electrode Material

Nanoporous structures of a p-type semiconductor, delafossite CuAlO2, with a high crystallinity have been fabricated through an inorganic/polymer double-gel process and characterized for the first time via Mott–Schottky measurements. The effect of the precursor concentration, calcination temperature, and atmosphere were examined to achieve high crystallinity and photoelectrochemical properties while maximizing the porosity. The optical properties of the nanoporous CuAlO2 are in good agreement with the literature with an optical band gap of 3.9 eV, and the observed high electrical conductivity and hole concentrations conform to highly crystalline and well-sintered nanoparticles observed in the product. The Mott–Schottky plot from the electrochemical impedance spectroscopy studies indicates a flat-band potential of 0.49 V versus Ag/AgCl. It is concluded that CuAlO2 exhibits band energies very close to those of NiO but with electrical properties very desirable in the fabrication of photoelectrochemical devices including dye-sensitized solar cells.

36 MATERIALS SCIENCE↗

Structural analysis of highly porous γ-Al{sub 2}O{sub 3}

Two highly porous γ-aluminas, a commercial catalyst obtained from the calcination of boehmite and a highly mesoporous product obtained from amorphous aluminum (oxy)hydroxide via a sol–gel-based process were investigated by {sup 27}Al nuclear magnetic resonance (NMR), transmission electron microscopy (TEM), and atomic pair distribution function (PDF) analysis of synchrotron powder diffraction data. NMR data showed for both materials a distribution of tetrahedrally and octahedrally coordinated Al at a 0.30:0.70 ratio, which is typical for γ-aluminas. TEM studies revealed that rod-shaped particles with about 5 nm in thickness are the building blocks of the porous structure in both materials. These particles often extend to a length of 50 nm in the commercial catalyst and are considerably shorter in the sol–gel-based material, which has a higher surface area. Refinement of PDFs revealed the presence of a ∼1 nm scale local structure and the validity of a tetragonal average structure for both materials. This tetragonal average structure contains a substantial fraction of non-spinel octahedral Al atoms. It is argued that the presence of local structure is a general feature of γ-alumina, independent of precursor and synthesis conditions. The concentration of “non-spinel” Al atoms seems to correlate with surface properties, and increases with increasing pore size/surface area. This should have implications to the catalytic properties of porous γ-alumina. - Graphical abstract: Boehmite-derived and sol–gel synthesized porous γ-Al{sub 2}O{sub 3} possess identical structural properties, featuring a nm scale local structure and a tetragonal average structure. - Highlights: • Porous γ-Al{sub 2}O{sub 3} generally possesses a nm-scale local structure. • The tetragonal average structure contains a substantial fraction of “non-spinel” Al atoms. • The concentration of “non-spinel” Al atoms correlates with surface properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗