Engineering Papers⌕ Search

Engineering topics

Scott, Susannah

Publications and source records attributed to Scott, Susannah.

Catalytic polymer processing

A method of upcycling polymers to useful hydrocarbon materials. A catalyst with nanoparticles on a substrate selectively docks and cleaves longer hydrocarbon chains over shorter hydrocarbon chains. The catalyst includes metal nanoparticles in an order array on a substrate.

Delferro, Massimiliano↗

Structure-performance correlations of cross-linked boronic acid polymers as adsorbents for recovery of fructose from glucose–fructose mixtures

Recovery of bio-oxygenates from reaction mixtures is one of the major challenges for future bio-refineries. Isolation of fructose produced by isomerization of glucose presents a typical example at a very early stage of the value chain. Here, we propose to recover fructose from a solution containing a mixture of glucose and fructose by adsorption on polymers bearing phenylboronate moieties. p-Vinylphenylboronic acid was polymerized with various cross-linkers, namely polar aliphatic, low-polarity aliphatic, and aromatic. The cross-linker content was in the range 5–40 mol%. The polymers exhibit high capacities for fructose, with a maximum loading of up to 1 mol Fru mol B -1 . Fructose loading depends significantly on the length and content of cross-linker, as well as pre-treatment of the polymer. In general, the maximum fructose capacity correlates with the swelling ability of the polymers, since phenylboronate moieties become available for adsorption upon swelling. In contrast, maximum glucose loadings are much lower, in the range 0.1–0.3 mol Glu mol B -1 , and depend only slightly on the type of cross-linker. The structures of the glucose and fructose complexes and the kinetics of their uptake were studied by in situ MAS NMR. Efficient desorption of fructose was observed in acidic medium, and more importantly, using CO 2 . The structures of the polymers after repeated adsorption and desorption remain unchanged, as confirmed by solid-state NMR. Adsorption-assisted isomerization of glucose catalyzed by soluble carbonates was also studied. A 56% yield of fructose was achieved after 8 successive cycles of reaction and adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Report of the Basic Energy Sciences Roundtable on Chemical Upcycling of Polymers

Plastics are ubiquitous in modern life. They are primarily made from synthetic carbon-based polymers— organic macromolecules made up of many repeating subunits called monomers—and are designed to be durable and resistant to degradation. Global plastics production has reached a rate of more than 400 million metric tons (MTs) per year, with more than 8 billion MTs produced in the past 50 years. Average production has increased by 36% in the past decade and is projected to grow to 700 million MTs in 2030—about 80 kg of plastics produced for every human on earth. Globally, 20% of discarded plastics are recycled (<10% in the United States), primarily using mechanical processes, and about 25% are incinerated for energy recovery. More than half are deposited into landfills or released into the environment. Thus, discarded plastics pose a long-term environmental challenge: For example, at the current rate of plastics production and disposal, the mass of plastics in the ocean is predicted to exceed the mass of fish by 2050. Current approaches to reducing unwanted plastics are insufficient to address the growing accumulation of discarded plastics. Although incineration eliminates unwanted plastics and recovers some of the energy used to make them, it uses up the potential resource and creates unwanted byproducts. Mechanical recycling—which involves shredding, heating, and remolding of the plastics—is more efficient than making them from petroleum products, using less than half as much energy to generate new plastics. However, mechanical recycling generally degrades, or downcycles, the polymers. Chemical recycling involves deconstruction of polymers by chemical processes to monomers for conversion back into polymers or to molecular intermediates that can be used as fuel or feedstock by the chemical industry. However, present methods (e.g., pyrolysis—high-temperature decomposition in the absence of oxygen), are energy-intensive and require further processing to make products. Chemical upcycling of polymers—the process of selectively converting discarded plastics into chemicals, fuels, or materials with higher value—holds the promise of changing the paradigm for discarded plastic from waste to valued resource. A significant opportunity exists for fundamental research to provide the foundational knowledge required to move toward a circular lifecycle for plastics, in which the chemical constituents of plastics are reformed into polymers or repurposed to give them another life. To identify the fundamental challenges and research opportunities that could accelerate the transformation of discarded plastics to higher-value fuels, chemicals, and materials, the US Department of Energy, Office of Science, Office of Basic Energy Sciences sponsored a Roundtable on Chemical Upcycling of Polymers, which was held near Washington, DC, on April 30–May 1, 2019. This roundtable identified four Priority Research Opportunities to address the complex chemical transformations and physical processes underlying the upcycling of discarded plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured carbide catalysts for the hydrogen economy

"The second grand challenge in the report centers on design and controlled synthesis of catalyst structures. Fundamental investigations of catalyst structures and the mechanisms of catalytic reactions provide the necessary foundation for the synthesis of improved catalysts." The above quote, taken from the executive summary of the Report from the US DOE Basic Energy Sciences Workshop held August 6–8, 2007, places in context the research carried out at the University of California, Santa Barbara, which is reported in this document. The enormous impact of heterogeneous catalysis is exemplified by the Haber process for the synthesis of ammonia, which consumes a few % of the world’s energy supply and natural gas, and feeds as many as a third of the world’s population. While there have been numerous advances in understanding the process, culminating in the awarding of the Nobel Prize to Gerhard Ertl in 2007, it is interesting to note that the catalysts themselves have changed very little since they were discovered heuristically in the early part of the 20th century. The thesis of this report is that modern materials chemistry, with all the empirical knowledge of solid state chemistry, combined with cutting edge structural tools, can help develop and better heterogeneous catalysis. The first part of this report describes research in the area of early transition metal carbides (notably of Mo and W), potentially useful catalysts for water gas shift (WGS) and related reactions of use to the hydrogen economy. Although these carbides have been known to be catalytically useful since the 1970s, further use of these relatively inexpensive materials have been plagued by issues of low surface areas and ill-defined, and often unreactive surfaces, in conjunction with deactivation. We have employed for the first time, a combination of constant-wavelength and time-of-flight neutron scattering, including a total scattering analysis of the latter data, to better understand what happens in these materials, in a manner that for the first time, reveals surface graphitic carbon in these materials in a quantitative manner. Problems of preparation, surface stability, and irreversible reactivity have become manifest in this class of materials that discourage us from pursuing these materials further.

08 HYDROGEN↗