Engineering Papers⌕ Search

Engineering topics

Scott, Carl D.

Publications and source records attributed to Scott, Carl D..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Electronically Excited C2 from Laser Photodissociated C60

Spectral and transient emission measurements are made of radiation from products of laser excitation of buckminsterfullerene (C60) vapor diluted in argon at 973 K. The principal radiation is from the Swan band system of C2 and, at early times, also from a black body continuum. The C2 radiation is observed only when C60 is excited by green (532 nm) and not with IR (1064 nm) laser radiation at energy densities of about 1.5 J/square cm. Transient measurements indicate that there are two characteristic periods of decay of radiation. The first period, lasting about 2 micro seconds, has a characteristic decay time of about 0.3 micro seconds. The second period, lasting at least 50 micro seconds, has a characteristic decay time of about 5 micro seconds. These characteristic times are thought to be associated with cooling of C60 molecules or nanosized carbon particles during the early period; and with electronically excited C2 that is a decomposition product of laser excited C60, C58, ... molecules during the later period.

Arepalli, Sivaram↗
NASA NTRS1998

An Approximate Axisymmetric Viscous Shock Layer Aeroheating Method for Three-Dimensional Bodies

A technique is implemented for computing hypersonic aeroheating, shear stress, and other flow properties on the windward side of a three-dimensional (3D) blunt body. The technique uses a 2D/axisymmetric flow solver modified by scale factors for a, corresponding equivalent axisymmetric body. Examples are given in which a 2D solver is used to calculate the flow at selected meridional planes on elliptic paraboloids in reentry flight. The report describes the equations and the codes used to convert the body surface parameters into input used to scale the 2D viscous shock layer equations in the axisymmetric viscous shock layer code. Very good agreement is obtained with solutions to finite rate chemistry 3D thin viscous shock layer equations for a finite rate catalytic body.

Brykina, Irina G.↗
NASA NTRS1997

Analysis of Flow From Arc-Jet Spectra

Materials testing is carried out at the JSC Atmospheric Reentry Materials and Structures Facility. A flow diagnostics program is under development to characterize the energy distribution in arc-jet flows used to simulate atmospheric entry. Heat transfer to materials depends on flow properties which includes the composition of and energy distribution among the atoms, ions, molecules, and molecular ions which make up the flow. This project involves analysis of shock layer characteristics from the radiation emitted and experimentally collected from near the front of the shock to near the surface of the material. The analysis has yielded information on relative populations of neutral molecules and molecular ions within the layer. In determining non-equilibrium temperatures within the layer, some insight into the spectral constants used to compute radiative emission has been gained.

Blackwell, H. E.↗
NASA NTRS1993

Measuring Arc-Jet Velocity With Laser-Induced Fluorescence

Laser-induced fluorescence in copper atoms entrained in arc jet provides spectrum from which temperature computed. Velocity of flow calculated from shift in spectrum between different angles of incidence. Two major advantages of this method of measurement: relatively nonintrusive; and laser beam focused to micro-sized region to yield high spatial resolution.

Yuen, Eric H.↗
NASA NTRS1993

Determining electron temperature and density in a hydrogen microwave plasma

A three-temperature thermo-chemical model is developed for analyzing the chemical composition and energy states of a hydrogen microwave plasma used for studying diamond deposition. The chemical and energy exchange rate coefficients are determined from cross section data, assuming Maxwellian velocity distributions for electrons. The model is reduced to a zero-dimensional problem to solve for the electron temperature and ion mole fraction, using measured vibrational and rotational temperatures. The calculations indicate that the electron temperature may be determined to within a few percent error even though the uncertainty in dissociation fraction is many times larger.

Scott, Carl D.↗
NASA NTRS1993

A nonequilibrium model for a moderate pressure hydrogen microwave discharge plasma

This document describes a simple nonequilibrium energy exchange and chemical reaction model to be used in a computational fluid dynamics calculation for a hydrogen plasma excited by microwaves. The model takes into account the exchange between the electrons and excited states of molecular and atomic hydrogen. Specifically, electron-translation, electron-vibration, translation-vibration, ionization, and dissociation are included. The model assumes three temperatures, translational/rotational, vibrational, and electron, each describing a Boltzmann distribution for its respective energy mode. The energy from the microwave source is coupled to the energy equation via a source term that depends on an effective electric field which must be calculated outside the present model. This electric field must be found by coupling the results of the fluid dynamics and kinetics solution with a solution to Maxwell's equations that includes the effects of the plasma permittivity. The solution to Maxwell's equations is not within the scope of this present paper.

Scott, Carl D.↗
NASA NTRS1992

Measured rotational and vibrational temperature differences in arc jet shock layers

Shock-layer-radiation emission spectra from the first negative system of the nitrogen molecular ion N2(+) are analyzed over the wavelength region between 370 and 430 nm. The shock layer is produced by a blunt body placed in the expanded flow from an arc heater employing either pure nitrogen or a nitrogen-oxygen air mixture. A rotational temperature is obtained from analysis of (0,1) band emission from N2(+). Vibrational temperatures are extracted from population distributions obtained through spectral fitting of the N2(+) (B-X) band sequences. Rotational temperatures up to 9500 K near the front of the shocks are determined for different energy and flow conditions. The rotational temperatures are found to be lower than those obtained for vibration confirming previous measurements and contrary to expectation based on theory.

Blackwell, Harvel E.↗
NASA NTRS1992

Wall catalytic recombination and boundary conditions in nonequilibrium hypersonic flows - With applications

The meaning of catalysis and its relation to aerodynamic heating in nonequilibrium hypersonic flows are discussed. The species equations are described and boundary conditions for them are derived for a multicomponent gas and for a binary gas. Slip effects are included for application of continuum methods to low-density flows. Measurement techniques for determining catalytic wall recombination rates are discussed. Among them are experiments carried out in arc jets as well as flow reactors. Diagnostic methods for determining the atom or molecule concentrations in the flow are included. Results are given for a number of materials of interest to the aerospace community, including glassy coatings such as the RCG coating of the Space Shuttle and for high temperature refractory metals such as coated niobium. Methods of calculating the heat flux to space vehicles in nonequilibrium flows are described. These methods are applied to the Space Shuttle, the planned Aeroassist Flight Experiment, and a hypersonic slender vehicle such as a transatmospheric vehicle.

Scott, Carl D.↗
NASA NTRS1991

Copper atom based measurements of velocity and turbulence in arc jet flows

Laboratory and field measurements were combined with a modeling effort to explore the feasibility of using atomic copper laser-induced fluorescence to measure velocity, turbulence, and temperature in arcjet flows. Both CW and pulsed frequency-doubled dye lasers were used to demonstrate the ability to measure velocity with 10 percent accuracy at rates of 200,000 cm/s in a rarefied flow of Cu atoms seeded in He. The pulsed laser established a threshold energy for power-broadening of the absorption line at 3.5 x 10 to the -8th J/sq cm. Field measurements at the NASA/JSC 10-MW arcjet facility demonstrated the ability to perform these measurements under actual test conditions. The use of this technique to measure freestream temperatures in the flow was examined for the 0.08/cm linewidth laser used in the NASA/JSC effort. Finally, single-shot turbulence measurements at the USAF/AEDC 35-MW H2 arcjet facility were measured with 4 percent accuracy using the laser/absorption line-overlap technique.

Marinelli, William J.↗
NASA NTRS1991

Intrusive and nonintrusive measurements of flow properties in arc jets

While numerous diagnostic techniques are available for determining the flow properties of arc jets, these have to be used complementarily in order to cover all the requisite information. Although intrusive techniques disturb the flow, they yield much information. The determination of total enthalpy remains a major challenge, and accurate heat-flux measurements entail knowledge of atom recombination and chemical energy recombination coefficients. Such state-specific methods as the spectroscopic and laser techniques are useful in understanding the chemistry and nonequilibrium reaction and excitation rates of the flow.

Scott, Carl D.↗
NASA NTRS1990

Application of Laser Induced Fluorescence for flow diagnostics in arc jets

Laser Induced Fluorescence (LIF) studies are carried out on copper atoms, nitric oxide and oxygen molecules in the arc jet flows at the NASA Johnson Space Center Reentry Simulation Testing Facility. Measurements are taken in the free stream and from a blunt body shock layer. Tests are performed under different flow conditions to determine the feasibility and sensitivity of the LIF technique for various species. The LIF technique is developed as a part of high enthalpy flow diagnostics and will be useful to elucidate the rotational and vibrational temperatures. Adequate sensitivity for the detection of O2 and NO is demonstrated. Preliminary experiments for temperature and velocity measurements using copper as a tracer material are shown to be a useful new application of the laser resonant Doppler scattering technique.

Arepalli, Sivaram↗
NASA NTRS1990

Survey of measurements of flow properties in arc jets

This paper reviews techniques for determining flow properties in low density arc jets used for materials and structures testing. Properties measured include flow total enthalpy, pressures, heat fluxes, static temperatures, electron density, species concentrations, and flow velocity. The probe techniques covered are pressure, heat flux, electrostatic, and mass sampling. Nonintrusive techniques include emission spectroscopy, laser-induced fluorescence, laser Thomson scattering, and Raman scattering. It is concluded that several techniques must be used in a single facility to obtain all of the flow field properties necessary to predict heat fluxes in a nonequilibrium expansion.

Scott, Carl D.↗
NASA NTRS1989

Nonequilibrium shock layer temperature profiles from arc jet radiation measurements

Shock layer temperature profiles are obtained through analysis of radiation from shock layers produced by a blunt body inserted in arc jet flow. Spectral measurements have been made in a nitrogen flow of 54.4 gm/s at an enthalpy of 8.72 MJ/kg. Vibrational temperatures for N2+ are obtained by matching spectral regions from arc jet spectra with spectra generated using the NEQAIR code. Temperature profiles obtained from the radiation layers show a vibrational temperature higher than the rotational temperature near the front of the shock and both temperatures decrease as the flow approaches the body. The spectral measurements are made and analysis completed for four distances, from the surface of the blunt body. The corresponding shock layer thickness is approximately 3.6 cm. Although the shock layer appears to be in thermal nonequilibrium, the measured rotational temperature approaches the single temperature results of viscous shock layer calculations at this test condition.

Blackwell, Harvel E.↗
NASA NTRS1989

Aerobraking orbital transfer vehicle

An aerobraking orbital transfer vehicle which includes an aerobraking device which also serves as a heat shield in the shape of a raked-off elliptic or circular cone with a circular or elliptical base, and with an ellipsoid or other blunt shape nose. The aerobraking device is fitted with a toroid-like skirt and is integral with the support structure of the propulsion system and other systems of the space vehicle. The vehicle is intended to be transported in components to a space station in lower earth orbit where it is assembled for use as a transportation system from low earth orbit to geosynchronous earth orbit and return. Conventional guidance means are included for autonomous flight.

Scott, Carl D.↗
NASA NTRS1989

Vibrational temperature from measurements of N2 and N2(+) shock layer radiation

Measurements of the vibrational temperature in a shock layer produced by a cylindrical blunt body in an arc jet nitrogen flow are made for both the neutral molecule and the molecular ion. Spectra were obtained at two locations in the shock layer produced by a 20-cm long cylindrical blunt body inserted in the arc jet conical flow. The technique used for determining the temperatures from the spectral radiation involves obtaining ratios of integrated intensities for certain spectral regions of the measured spectrum and making a comparison with computed ratios as a function of temperature for the same spectral regions. The technique is difficult to apply due to radiation overlapping bands from other species. However, using a trial and error procedure, the vibrational and rotational temperatures at the two locations are inferred. The results indicate that the shock layer is significantly out of thermal equilibrium.

Blackwell, Harvel E.↗
NASA NTRS1989

Effects of thermochemistry, nonequilibrium, and surface catalysis on the design of hypersonic vehicles

An account is given of the function of physical aspects of a gas on the characteristics of the flow and of the heating associated with hypersonic flight. At the high temperatures encountered, the thermal and chemical characteristics of the air in a hypersonic vehicle's shock layer are altered in ways which depend on the atomic and molecular structure of N and O and their ions; similar effects exist in scramjet propulsion systems. These properties in turn influence the character of shock waves and expansions, and hence the pressure, temperature, and velocity distributions. Transport properties affecting the boundary-layer structure will also affect heat flux and shear stress.

Scott, Carl D.↗
NASA NTRS1987

Spectral determination of nitrogen vibrational temperatures

A technique for determining the vibrational temperature of nitrogen molecules is found from the emission of the N2 first positive spectrum. The technique involves calculating wavelength integrals of portions of the emission spectrum associated with transitions from the ststes B3Pi(g)(v-prime) to A3 Sigma(u +)(v-double prime) where Delta = 2, 3, etc. Ratios of the integrated intensities are then correlated with vibrational temperature. The dependence of the technique on rotational temperature is considered and less dependence is obtained if the overlap between Delta v-regions is accounted for. The technique is applied to the shock layer of a blunt body in an arc jet flow. The N2(1+) spectrum is measured in the shock layer to obtain the intensity integral ratios. From these ratios estimates of the vibrational temperature are found from the correlation which agree quite well with calculated temperatures in the shock layer flow.

Blackwell, Harvel E.↗