Engineering Papers⌕ Search

Engineering topics

Schwehm, G.

Publications and source records attributed to Schwehm, G..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

South-North and radial traverses through the interplanetary dust cloud

Identical in situ dust detectors are flown on board the Galileo and Ulysses spacecraft. They record impacts of micrometeoroids in the ecliptic plane at heliocentric distances from 0.7 to 5.4 AU and in a plane almost perpendicular to the ecliptic from -79 deg to +79 deg ecliptic latitude. The combination of both Ulysses and Galileo measurements yield information about the radial and latitudinal distributions of micron and sub-micron sized dust in the solar system. Two types of dust particles were found to dominate the dust flux in interplanetary space: (1) Interplanetary micrometeoroids covering a wide mass range from 10(exp -16) to 10(exp -6) gr are mostly recorded inside 3 AU, and at latitudes below 30 deg; and (2) Interstellar grains with masses between 10(exp -14) and 10(exp -12) gr have been positively identified outside 3 AU near the ecliptic plane and outside 1.8 AU at high ecliptic latitudes (> 50 deg). Interstellar grains move on hyperbolic trajectories through the planetary system and constitute the dominant dust flux (1.5 x 10(exp -4)/ sq m sec) in the outer solar system and at high ecliptic latitudes. In order to compare and analyze the Galileo and Ulysses data sets, a new model is developed based on Divine's (1993) "Five populations of interplanetary meteoroids" model. By using this model, which takes into account the measured velocities and the effect of radiation pressure on small particles, we define four populations of meteoroids on elliptical orbits plus one population on hyperbolic orbits that all can fit the micrometeoroid flux observed by Galileo and Ulysses.

Gruen, E.↗
NASA NTRS1992

The Ulysses dust experiment

The Ulysses dust experiment is intended to provide direct observations of dust grains with masses between 10 exp -16 g and 10 exp -6 g in interplanetary space, to investigate their physical and dynamical properties as functions of heliocentric distance and ecliptic latitude. Of special interest is the question of what portion is provided by comets, asteroids, and interstellar particles. The investigation is performed with an instrument that measures the mass, speed, flight direction, and electric charge of individual dust particles. It is a multicoincidence detector with a mass sensitivity 10 exp 6 times higher than that of previous in situ experiments which measured dust in the outer solar system. The instrument weighs 3.8 kg, consumes 2.2 W, and has a normal data transmission rate of 8 bits/s in nominal spacecraft tracking mode. On 27 October 1990 the instrument was switched-on. The instrument was configured to flight conditions and science data collection started immediately. In the period to 13 January 1991, at least 44 dust impacts have been recorded. Flux values are given covering the heliocentric distance range from 1.04 to 1.7 AU.

Gruen, E.↗
NASA NTRS1992

The Ulysses dust experiment

The Ulysses dust experiment is intended to provide direct observations of dust grains with masses between 10(exp -16) g and 10(exp -6) g in interplanetary space, to investigate their physical and dynamical properties as functions of heliocentric distance and ecliptic latitude. Of special interest is the question of what portion is provided by comets, asteroids and interstellar particles. The investigation is performed with an instrument that measures the mass, speed, flight direction, and electric charge of individual dust particles. It is a multicoincidence detector with a mass sensitivity 10(exp 6) times higher than that of previous in-situ experiments which measured dust in the outer solar system. The instrument weighs 3.8 kg, consumes 2.2 W, and has a normal data transmission rate of 8 bits/s in nominal spacecraft tracking mode. On 27 Oct. 1990 the instrument was switched on. The instrument was configured to flight conditions, and science data collection started immediately. At least 44 dust impacts had been recorded by 13 Jan. 1991. Flux values are given covering the heliocentric distance range from 1.04 to 1.7 AU.

Gruen, E.↗
NASA NTRS1989

VUV-visible measurements on different samples of amorphous carbon

Among various candidate materials for interstellar dust, amorphous carbon (AC) is playing an increasingly important role (Greenstein, 1981; Hecht et al., 1984; Jura, 1983, 1986). Furthermore, recent in situ measurements have clearly shown the presence of carbonaceous grains in the coma of comet Halley (Kissel et al., 1986). Laboratory investigations on AC grains may be very useful to better interpret observations and to support theoretical elaborations. Recently, the authors started an international research program which also includes UV extinction analyses on AC samples, by using synchrotron light. Preliminary results obtained in a first shift of measurements, last June, are given. At the present stage of the data analysis, the authors can only draw some preliminary considerations. A wide band falling at around 240 nm is detected in all the analyzed samples. It intensity seems to decrease with increasing the dust collecting distance. A peak at 150 nm decreases in intensity with increasing the collecting distance. The band seems absent in the samples characterized by a larger amount of dust. A feature at about 200 nm is detected in some samples. At the moment the authors tend to attribute it to the transmission properties of the LiF substrates at the wavelength and/or to some problems in the experimental setup. It is unclear if a hump at 120 nm is real or due to instrumental effects. The profile of the spectra does not show substantial changes when the samples are cooled down to about 100 K. The present results appear to be in general agreement with previous findings, but their analysis is in progress and the interpretation is still on the way.

Blanco, A.↗
NASA NTRS1989

Experimental evidence for amorphous carbon grains in comets

Amorphous carbon grains similar to those produced in the laboratory, but with a higher hydrogen content, appear to be good candidates to simulate both the IR continuum emission and the 3.4 micron band measured for P/Halley. The comparison of the cometary features with those detected in the laboratory for carbon grains characterized by various sp(exp 2)/sp(exp 3) ratios seems to indicate that a prevalent diamond-like (sp(exp 3)) structure should be present in cometary particles. These kinds of solid particles seem also suitable to explain the daily and monthly variations of the 3.4 micron band intensity, relative to the continuum, and, at the same time,- to fulfill the abundance constraints. The same grains appear to be able to reproduce the absorption bands detected in the IR galactic source IRS 7. This result may be considered as a first experimental evidence of a relation existing between interstellar dust and cometary materials.

Colangeli, Luigi↗
NASA NTRS1989

Laboratory analyses of micron-sized solid grains: Experimental techniques and recent results

Morphological and spectrophotometric investigations have been extensively applied in the past years to various kinds of micron and/or submicron-sized grains formed by materials which are candidate to be present in space. The samples are produced in the laboratory and then characterized in their physio-chemical properties. Some of the most recent results obtained on various kinds of carbonaceous materials are reported. Main attention is devoted to spectroscopic results in the VUV and IR wavelength ranges, where many of the analyzed samples show typical fingerprints which can be identified also in astrophysical and cometary materials. The laboratory methodologies used so far are also critically discussed in order to point out capabilities and present limitations, in the view of possible application to returned comet samples. Suggestions are given to develop new techniques which should overcome some of the problems faced in the manipulation and analysis of micron solid samples.

Colangeli, L.↗
NASA NTRS1989

Mechanical and SEM analysis of artificial comet nucleus samples

Since 1987 experiments dealing with comet nucleus phenomena have been carried out in the DFVLR space simulation chambers. The main objective of these experiments is a better understanding of thermal behavior, surface phenomena and especially the gas dust interaction. As a function of different sample compositions and exposure to solar irradiation (xenon-bulbs) crusts of different hardness and thickness were measured. The measuring device consists of a motor driven pressure foot (5 mm diameter), which is pressed into the sample. The applied compressive force is electronically monitored. The microstructure of the crust and dust residuals is investigated by scanning electron microscopy (SEM) techniques. Stress-depth profiles of an unirradiated and an irradiated model comet are given.

Thiel, K.↗
NASA NTRS1985

Dust emission of Comet Halley at large heliocentric distances

Comet Halley is currently approaching the inner solar system. Four spacecrafts (NASA's spacecraft, two Russian Vega probes and the Japanese MS-T5 spacecraft) have already been launched to encounter the comet in March 1986. Two additional Halley probes (the European Giotto spacecraft and another Japanese Planet-A probe) will be launched in mid-85 to join the armada. Observations of dust emissions from Halley's Comet are discussed. The evaporation of cometary ices causes the emission of particulates from the nucleus. These observations will be used to determine the fly-by strategy of the Giotto spacecraft by taking into account the distribution of dust in the vicinity of the nucleus and the associated hazard for the space mission.

Gruen, E.↗
NASA NTRS1983

The ISPM dust experiment

The ISPM Dust Experiment observes particulate matter with masses between 10 to the minus 19th power and 10 to the minus 10th power kg in the solar system; investigates its physical and dynamical properties as a function of ecliptic latitude and heliocentric distance; and studies its interaction with solar radiation, the solar wind, and the interplanetary magnetic field. Measurement of the three dimensional spatial distribution of cosmic dust particles and their dynamics allows the relative significance of their probable sources (comets, asteroids and interstellar dust) to be determined. An instrument that measures the mass, speed, flight direction and electric charge of individual dust particles is used. It is a multicoincidence detector with a sensitivity 100,000 times higher than that of previous experiments. The instrument weighs 3.750 kg, consumes 2.0 W, and has a normal data transmission rate of 8 bit/sec in spacecraft tracking mode.

Gruen, E.↗
NASA NTRS1983

The evolution of spokes in Saturn's B ring

Three types of Saturnian ring spoke structure have been observed which are distinguished by their optical appearance. Extended spokes are found inside the corotation radius. They are of irregular shape, with diffuse edges, but often narrowed at large distances. Their width at the base is typically 20,000 km, and their radial extent is 8000 km. The random velocity of their particles is about 2 m/s, and the total kinetic energy of their random velocity component is about 20 billion J. Narrow spokes are observed to cross the corotation distance and are characterized by high-contrast edges. Their number of particles and total energy content are about 10 percent of the values for extended spokes. Filamentary spokes are observed outside approximately 110,000 km and are usually connected to narrow or extended spokes further in. Their width is typically 500 km and their length is about 3000 km. Their number of particles and total energy content are about 0.5 percent of those of an extended spoke.

Gruen, E.↗
NASA NTRS1980

A model of the origin of the Jovian ring

Assuming that the micron-sized particles making up the bright Jovian ring are fragments of erosive collisions between micrometeoroid projectiles and large parent bodies, a physical model of the ring is calculated. This leads to a well-defined size distribution for the ejecta, whose optical properties can be compared with observation. The (most likely silicate) ejecta material maximum diameter is estimated to be 0.1 micron, and most likely the result of Io volcanic activity. The impact model's determination of ejecta size distribution in turn determines the structure of the ring, with the largest ejecta forming the bright ring, medium-sized ejecta forming a disk that extends to the Jovian atmosphere, and small ejecta forming a faint halo whose structure is dominated by electromagnetic forces.

Gruen, E.↗