Engineering PapersSearch

Engineering topics

Schultz, P. H.

Publications and source records attributed to Schultz, P. H..

At least 55 records · Page 3

Styles of ejecta emplacement under atmospheric conditions

Laboratory experiments provide essential first-order constraints on processes affecting ballistic ejecta and styles of ejecta emplacement under different atmospheric environments at planetary scales. The NASA-Ames Vertical Gun allows impacting different fine-grained particulate targets under varying atmospheric pressure and density, thereby helping to isolate controlling variables. Further analysis now permits characterizing distinct modes of emplacement that reflect the degree of ejecta entrainment within a turbidity flow created by ejecta curtain movement through the atmosphere.

Schultz, P. H.

Impact decapitation from laboratory to basin scales

Although vertical hypervelocity impacts result in the annihilation (melting/vaporization) of the projectile, oblique impacts (less than 15 deg) fundamentally change the partitioning of energy with fragments as large as 10 percent of the original projectile surviving. Laboratory experiments reveal that both ductile and brittle projectiles produce very similar results where limiting disruption depends on stresses proportional to the vertical velocity component. Failure of the projectile at laboratory impact velocities (6 km/s) is largely controlled by stresses established before the projectile has penetrated a significant distance into the target. The planetary surface record exhibits numerous examples of oblique impacts with evidence fir projectile failure and downrange sibling collisions.

Schultz, P. H.

Characteristics of ejecta and alluvial deposits at Meteor Crater, Arizona and Odessa Craters, Texas: Results from ground penetrating radar

Previous ground penetrating radar (GRP) studies around 50,000 year old Meteor Crater revealed the potential for rapid, inexpensive, and non-destructive sub-surface investigations for deep reflectors (generally greater than 10 m). New GRP results are summarized focusing the shallow sub-surfaces (1-2 m) around Meteor Crater and the main crater at Odessa. The following subject areas are covered: (1) the thickness, distribution, and nature of the contact between surrounding alluvial deposits and distal ejecta; and (2) stratigraphic relationships between both the ejecta and alluvium derived from both pre and post crater drainages. These results support previous conclusions indicating limited vertical lowering (less than 1 m) of the distal ejecta at Meteor Crater and allow initial assessment of the gradational state if the Odessa craters.

Grant, J. A.

Igneous intrusion models for floor fracturing in lunar craters

Lunar floor-fractured craters are primarily located near the maria and frequently contain ponded mare units and dark mantling deposits. Fracturing is confined to the crater interior, often producing a moat-like feature near the floor edge, and crater depth is commonly reduced by uplift of the crater floor. Although viscous relaxation of crater topography can produce such uplift, the close association of modification with surface volcanism supports a model linking floor fracture to crater-centered igneous intrusions. The consequences of two intrusion models for the lunar interior are quantitatively explored. The first model is based on terrestrial laccoliths and describes a shallow intrusion beneath the crater. The second model is based on cone sheet complexes where surface deformation results from a deeper magma chamber. Both models, their fit to observed crater modifications and possible implications for local volcanism are described.

Wichman, R. W.

The spatial distribution and time evolution of impact-generated magnetic fields

The production of magnetic fields was revealed by laboratory hypervelocity impacts in easily vaporized targets. As quantified by pressure measurements, high frame-rate photography, and electrostatic probes, these impacts tend to produce large quantities of slightly ionized vapor, which is referred to as impact-generated plasma. Nonaligned electron density and temperature gradients within this plasma may lead to production of the observed magnetic fields. Past experiments were limited to measuring a single component of the impact-generated magnetic fields at only a few locations about the developing impact crater and consequently gave little information about the field production mechanism. To understand this mechanism, the techniques were extended to map the three components of the magnetic field both in space and time. By conducting many otherwise identical experiments with arrayed magnetic detectors, a preliminary 3-D picture was produced of impact-generated magnetic fields as they develop through time.

Crawford, D. A.

The role of impact cratering for Mars sample return

The preserved cratering record of Mars indicates that impacts play an important role in deciphering Martian geologic history, whether as a mechanism to modify the lithosphere and atmosphere or as a tool to sample the planet. The various roles of impact cratering in adding a broader understanding of Mars through returned samples are examined. Five broad roles include impact craters as: (1) a process in response to a different planetary localizer environment; (2) a probe for excavating crustal/mantle materials; (3) a possible localizer of magmatic and hydrothermal processes; (4) a chronicle of changes in the volcanic, sedimentary, atmospheric, and cosmic flux history; and (5) a chronometer for extending the geologic time scale to unsampled regions. The evidence for Earth-like processes and very nonlunar styles of volcanism and tectonism may shift the emphasis of a sampling strategy away from equally fundamental issues including crustal composition, unit ages, and climate history. Impact cratering not only played an important active role in the early Martian geologic history, it also provides an important tool for addressing such issues.

Schultz, P. H.

Oblique impacts: Catastrophic vs. protracted effects

Proposed impacts as the cause of biologic catastrophes at the end of the Cretaceous and Eocene face several enigmas: protracted extinctions, even prior to the stratigraphic cosmogenic signature; widespread but non-uniform dispersal of the meteoritic component; absence of a crater of sufficient size; and evidence for massive intensive fires. Various hypotheses provide reasonable mechanisms for mass mortalities: global cooling by continental impact sites; global warming by oceanic impact sites; contrasting effects of asteroidal, cometary, and even multiple impacts; and stress on an already fragile global environment. Yet not every known large impact is associated with a major biologic catastrophe. An alternative is expanded: the consequences of an oblique impact. The most probable angle of impact is 45 deg with the probability for an impact at smaller angles decreasing: A vertical impact is as rare as a tangential impact with a 5 deg impact angle or less occurring only 8 percent of the time. Consequently a low-angle impact is a rare but probable event. Laboratory experiments at the NASA-Ames Vertical Gun Range reveal important information about cratering efficiency, impact vaporization, projectile dispersal, and phenomenology, thereby providing perspective for possible consequences of such an impact on both the Earth and Moon. Oblique impacts are rare but certain events through geologic time: A 5 deg impact by a 2 km-diameter impactor on the Earth would occur only once in about 18 my with a 10 km-diameter once in about 450 my. Major life extinctions beginning prior to the stratigraphic cosmogenic signature or protracted extinctions seemingly too long after the proposed event may not be evidence against an impact as a cause but evidence for a more complex but probable sequence of events.

Schultz, P. H.

Non-random cratering flux in recent time

Proposed periodic cycles of mass mortality have been linked to periodic changes in the impact flux on Earth. Such changes in the impact flux, however, also should be recorded on the Moon. Previous studies have concluded that the impact flux on the Moon over the last 1 to 2 billion years has been reasonably constant, but sudden changes in the impact flux over time intervals as short as 30 my could not be detected in these studies unless the added crater population greatly exceeded the cumulative cratering record. Consequently this study focuses only on bright-rayed craters larger than 1 km thereby not only limiting the study to recent craters but also largely eliminating contamination by secondary craters. Preservation of ray patterns and other fine-scale surface textures in the ejecta provides first-order culling of craters younger than Tycho, i.e., about 100 my. Although a periodic change in the impact flux in the Earth-Moon system cannot yet be confirmed from the data, a non-random component appears to exist with an increased flux around 7 and 15 my. The concentrations in different quadrants of the lunar hemisphere would be consistent with a shower of debris generally smaller than 0.5 km.

Schultz, P. H.

Impacts of hemispherical granular targets: Implications for global impacts

As impact excavation diameters subtend a nontrivial fraction of a planetary body, both the excavation process and ejecta emplacement may depart form the classical description of impacts into a planar surface. Hemispherical particulate targets were impacted at the NASA-Ames Vertical Gun Range in order to trace the evolution of the ejecta curtain and to document the effects of slope and surface curvature on crater shape and cratering efficiency. The experiments suggest that basin size impacts or large craters on small bodies may be shallower than their counterparts on a planar surface but may have displaced a larger relative mass. Moreover, the increased ejecta curtain angle with distance may result in a change in ejecta emplacement style with distance. Although the ejecta curtain is vertical, ejecta within the curtain impact the surface at 45 deg and the time between first and last arrival within the curtain increases. This increased interaction time as the ejecta curtain density decreases should result in a more chaotic style of implacement.

Schultz, P. H.

Impact vaporization: Late time phenomena from experiments

While simple airflow produced by the outward movement of the ejecta curtain can be scaled to large dimensions, the interaction between an impact-vaporized component and the ejecta curtain is more complicated. The goal of these experiments was to examine such interaction in a real system involving crater growth, ejection of material, two phased mixtures of gas and dust, and strong pressure gradients. The results will be complemented by theoretical studies at laboratory scales in order to separate the various parameters for planetary scale processes. These experiments prompt, however, the following conclusions that may have relevance at broader scales. First, under near vacuum or low atmospheric pressures, an expanding vapor cloud scours the surrounding surface in advance of arriving ejecta. Second, the effect of early-time vaporization is relatively unimportant at late-times. Third, the overpressure created within the crater cavity by significant vaporization results in increased cratering efficiency and larger aspect ratios.

Schultz, P. H.

Distribution and timing of thick transient air-fall deposits in Electris: Implications for the nature of the upland plains

A large area in the Electris region of Mars is (or once was) covered by an unconformable and etched deposit. Although interpreted as lava filling volcano-tectonic depressions or fluvial deposits filling large degraded craters, more recent work has shown the deposit is more likely the result of air-fall deposition. Crater densities on both the surface of the deposit and on exhumed, underlying ridged plains indicate that the deposit was emplaced and eroded over a relatively short time. These crater statistics also demonstate that the relative age of the Electris deposit is similar to those obtained for other unconformable deposits, thereby suggesting they may be related.

Grant, J. A.

Early cratering rates and the nature of the Martian cratered uplands

The cratered uplands of Mars represent a complex sequence of reworked crater ejecta, distant basin ejecta deposits, sedimentary (aeolian and fluvial) deposits, and possible volcanic plains. The heritage of the early period of impact bombardment is documented in the preserved cratering record where the aereal density of large craters (greater than 20 km) exceeds that of the moon and subtle relicts of large impact basins remain. The cratering record provides a means to estimate the early impact flux on Mars, to constrain the direct and indirect effects of the impact process over various scales, and to evaluate the nature of the cratered upland surface materials. Four issues are addressed: the early Martian cratering rate; the role of late-stage atmospheric accretion of volatiles; the relative effects of craters and basins on the global redistribution of crustal materials; and the indirect longer term effects of basin formation.

Schultz, P. H.

Crater ejecta morphology and the presence of water on Mars

The possible effects of projectile, target, and environment on the cratering process is reviewed. It is suggested that contradictions in interpreting Martian crater ejecta morphologies reflect over simplifying the process as a singular consequence of buried water. It seem entirely possible that most ejecta facies could be produced without the presence of liquid water. However, the combination of extraordinary ejecta fluidity, absence of secondaries, and high ejection angles all would point to the combined effects of atmosphere and fluid rich substrates. Moreover, recent experiments revealing the broad scour zone associated with rapid vapor expansion may account for numerous craters in the circumpolar regions with subtle radial grooving extending 10 crater radii away with faint distal ramparts. Thus certain crater ejecta morphologies may yet provide fundamental clues for the presence of unbound water.

Schultz, P. H.

Debris-cloud collisions: Accretion studies in the space station

The growth of planetesimals in the Solar system reflects the success of collisional aggregation over disruption. Recent experiments performed at the NASA-Ames Vertical Gun Range are discussed using the production of debris cloud impaction to model protoplanetary accretion. The impact experiment assessed the differences between clustered and single body impacts on particulate surfaces. The preliminary results would indicate that collisions between two debris clouds might produce aggregates, thereby increasing particle sizes, whereas a single particle impacting a particle results in disruption and comminution. Such an experiment could provide new insight for early planetary growth processes and for interpreting the record of this stage. The use of the microgravity environment of the Space Station to further the research is discussed.

Schultz, P. H.

Impacts of free-floating objects: Unique space station experiments

The transfer of momentum and kinetic energy between planetary bodies forms the basis for wide ranging problems in planetary science ranging from the collective long term effects of minor perturbations to the catastrophic singular effect of a major collision. Although the collisional transfer of momentum and energy was discussed over the last two decades, major issues remain that largely reflect current limitations in Earth based experimental conditions and 3-D numerical codes. Two examples with potential applications in a Space Station laboratory, are presented: asteroid spin rates and orientations, and planetary disruption/spin rates. Asteroid spin rate and orientation experiments are needed wherein free floating nonspining and spining objects of varying strength, porosity, and volatility are impacted at varying velocities and angles. A space station platform also could provide an opportunity to test important facets of planetary disruption/spin rate models by allowing freely suspended spherical targets of varying viscosities, internal density gradients, and spin rates.

Schultz, P. H.

Global and regional ridge patterns on Mars

A systematic study of Martian wrinkle ridges was performed to synthesize a theory of the planetary interior forces which produced such surface features. The survey was carried out using Mariner-9 and Viking orbiter imagery. Attention was given to the global distributions of ridge types in terms of geologic and tectonic surrounds, and to the orientation of ridges relative to impact basins. High/low relief ridges, ridge wings and rectilinear ridges were examined. Ridge orientation and distribution were found to be controlled by the forces of formation and modification of impact basins. Several other conclusions were reached regarding basin-concentric ridge patterns, regional stress patterns, regions of the most numerous ridges, and the location of a major compressive zone.

Chicarro, A. F.

Clustered impacts - Experiments and implications

The characteristics of impact by clusters of projectiles are experimentally studied by launching grouped projectiles of aluminum shot, steel shot, iron filings, and sand. Cratering efficiency is considered as a function of a dimensionless parameter related to projectile size and impact velocity. The effects of different target and projectile densities on cratering efficiency are examined. Crater morphology is addressed by considering a typical example, reviewing the systematics between cluster dispersion and crater morphology for vertical impacts, and examining oblique angle impacts which have relevance for planetary secondary cratering processes. These results are compared with impacts by single bodies with different strengths. The evolution of the ejecta plume for clustered impacts is compared to that for single-body impacts for vertical and oblique impacts from 1.3 to 1.8 km/s. The experimental results are discussed in the context of planetary surface processes, emphasizing processes in an atmosphere-free environment and secondary impact cratering.

Schultz, P. H.

On the brittle-ductile behavior of iron meteorites - New experimental constraints

Impact trials were performed at the NASA vertical gun range to study low-temperature brittle-ductile transitions in meteoritic, steel and iron targets. The trials were performed to enhance the data base underlying the concept of formation of planetesimals in collisional coagulation. Impact velocities of 1.6-5.5 km/sec were used, as were temperatures from 100-300 K. Spallation was observed in the tests with meteorite samples, even at room temperature, and brittleness was enhanced at temperature below 200 C. Net mass losses were induced at the higher impact velocities. It is suggested that iron meteorite agglomerations could form in the inner solar region during nebular condensation, but would not form in farther-out regions such as the asteroid belt. The protoplanets could have an iron core, with metallicity decreasing with radius from the core, which may have happened with the earth.

Matsui, T.