Transient Covalency in Molten Uranium(III) Chloride
Not Available
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Engineering topics
Schorne-Pinto, Juliano
Publications and source records attributed to Schorne-Pinto, Juliano.
Density Measurements of Molten LiF–BeF 2 and LiF–BeF 2 –LaF 3 Salt Mixtures by Neutron Radiography
The densities of eutectic (LiF) 2 –BeF 2 and mixtures of this salt (FLiBe) with LaF 3 were measured by dilatometry and by neutron attenuation from 673 K to 1,073 K. Because LaF 3 has a limited solubility in FLiBe, it was necessary to determine the amount of LaF 3 in solution before the density could be determined. The FLiBe density determination was favorably benchmarked against the literature data. A simple comparison was not available for the LaF 3 –FLiBe mixtures, so extrapolation of published data was necessary based on analysis using the Molten Salt Thermal Properties Database-Thermochemistry, or MSTDB-TC, developed by the US Department of Energy. Solubilities for LaF 3 in FLiBe ranged from 1 to 4 mol % over 673 to 1,073 K. The salt system was heated and cooled over 24 h to evaluate potential changes in composition and hysteresis during the measurement. Changes in the meniscus were observed, and these were included in the correction for density determinations. Salt surface tension may have led to supersaturation of LaF 3 in the salt because the solubility curve was nonlinear with respect to the inverse temperature, as would be expected for an ideal system. Surface tension measurements are currently underway to test this hypothesis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Thermodynamic modeling of CsF with LiF-NaF-KF for molten fluoride-fueled reactors
Gibbs energy models were developed to describe the thermochemical behavior of CsF in molten FLiNaK (46.5LiF-11.5NaF-42KF mol%), a proposed molten salt reactor (MSR) fuel solvent and coolant, as cesium is of concern due to its high radiotoxicity and volatility. Initially, it was necessary to obtain a more accurate Gibbs energy function for CsF which required fitting parameters to reported vapor pressures over condensed phase CsF. The pseudo-binary systems CsF-LiF, CsF-NaF and CsF-KF were then evaluated utilizing phase equilibria and enthalpy of mixing (Δ mix H) values, together with original differential scanning calorimetry (DSC) measurements performed for the CsF-LiF and CsF-KF systems. The CsF-LiF-NaF, CsF-LiF-KF and CsF-NaF-KF pseudo-ternary system representations were obtained by interpolation of the constituent pseudo-binary systems, with DSC measurements performed for the CsF-LiF-NaF system to corroborate the calculated liquidus temperature. Ultimately, the pseudo-ternary systems were interpolated to obtain Gibbs energy models for the pseudo-quaternary CsF-LiF-NaF-KF system, supported by DSC measurements at low CsF compositions (1–10 mol%), yielding computed equilibria and cesium-containing vapor pressures that compare favorably with reported values. In conclusion, the Molten Salt Thermal Properties Database – Thermochemical (MSTDB-TC) was subsequently expanded to include these Gibbs energy models allowing description of the thermochemical behavior of the CsF-LiF-NaF-KF system.
11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Thermal Property Modeling and Assessment of the Physical Properties of FLiNaK
Here, the thermodynamic properties of the LiF–NaF–KF system and its subsystems were re-evaluated using the CALPHAD method, focusing on the deviations from ideality in the heat capacity [C p (T)] of mixtures, temperature-dependence of mixing enthalpies (Δ mix H), vapor pressures of mixtures, and enthalpies of fusion (ΔH fus ) using reported values and measurements. The results of this work confirmed a pseudoternary eutectic at 732.9 K and 46.5LiF–11.5NaF–42KF mol % (FLiNaK) with determined Cp(T) = 69.822 + 0.000679T + 2,137,152T –2 J mol –1 K –1 (732.9 < T < 1200 K) and ΔH fus = 18,051 J mol –1 in good agreement to the experimental values. The resulting accurate thermodynamic representation can be used to find relevant excess thermochemical properties in the whole pseudoternary space and provide insights into their composition and temperature dependence. A detailed evaluation of select thermophysical properties was also conducted to determine recommended density, thermal diffusivity, thermal conductivity, vapor pressures, and boiling point with calculated uncertainties over the temperature range of interest for FLiNaK–salt energy applications.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Synthesis and thermophysical property determination of NaCl-PuCl3 salts
Currently, a knowledge gap exists in the available data and understanding of thermophysical properties relating to fresh fuel salts, especially those containing plutonium. These data are necessary for designing, constructing, and licensing future commercial molten-salt reactors. Thermophysical properties, such as melting temperature, salt stability, density, and heat capacity were ascertained using NaCl-PuCl3 (36 mol% PuCl3) and a more sodium rich composition containing 25 mol% PuCl3. The NaCl-PuCl3 salt mixture was synthesized for this study and contained 63.4 mol% NaCl, 36.3 mol% PuCl3 and was 99.7% pure. Upon heating, the NaCl–PuCl3 eutectic was stable at temperatures up to 800 °C. The onset of melting occurred at 451 ± 3 °C, and the enthalpy of fusion was determined to be 23.0 ± 1.4 kJ/mol. Heat capacity measurements in the liquid phase ranged from 107.7 to 91.3 J/mol.K, with an average value of 104.6 ± 11.4 J/mol.K between 500 and 650 °C. Three independent trials of the molten NaCl-PuCl3 salt found the density to be ?(T) = 3.8589 – 9.5342·10-4 T(°C). In addition, ab initio molecular dynamic simulations to calculate density and heat capacity values are included.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
All-Inorganic Open-Framework Chalcogenides, A 3 Ga 5 S 9 · x H 2 O ( A = Rb and Cs), Exhibiting Ultrafast Uranyl Remediation and Illustrating a Novel Post-Synthetic Preparation of Open-Framework Oxychalcogenides
Fast and effective uranyl sequestration is of interest to the nuclear industry. Recently layered chalcogenide materials have demonstrated fast, selective, and efficient sorption properties towards uranyl cations and the development and investigation of new types of chalcogenide materials continues to be of interest and represents an intriguing option for uranyl remediation. Three new all-inorganic A 3 Ga 5 S 9 ·xH 2 O (A = Rb, Rb/Cs, and Cs) open-framework chalcogenides were obtained via an in-situ alkali carbonate to alkali sulfide conversion process achieved under mild hydrothermal conditions. The structures of the all-inorganic open framework chalcogenides consist of a 2-fold interpenetrated diamond-like 3D framework containing pseudo-T 3 [Ga 10 S 20 ] 10– supertetrahedra. 48% of the structural volume is occupied by A + cations and water species, as established by single-crystal X-ray diffraction (SCXRD), infrared (IR) and energy-dispersive (EDS) spectroscopies. The dynamic nature of the A + cations and water molecules within the pores was investigated via single crystal X-ray diffraction as well as by IR spectroscopy monitored H 2 O to D 2 O exchange experiments. Framework stability was probed with post-synthetic treatment of A 3 Ga 5 S 9 ·xH 2 O (A = Rb and Cs) samples in acidic solutions that resulted in the formation of the oxysulfide (A/H) 3 Ga 5 S 9–y O y ·xH 2 O (A = Rb and Cs; y = 0–1), as shown by SCXRD and IR. Ion-exchange studies on A 3 Ga 5 S 9 ·xH 2 O (A = Rb and Cs) samples were carried out utilizing a uranyl acetate solution. The presence of the UO 2 2+ species in the ion-exchanged product was supported by IR and EDS spectroscopies. Batch method ion-exchange experiments on Cs 3 Ga 5 S 9 ·xH 2 O powder demonstrated fast kinetics with 95% uranyl removal from the uranyl acetate solution during the first minute, a maximum uranyl uptake capacity of 15mg/g, and the subsequent elution of uranyl species with KCl solution. Furthermore, the porous and dynamic nature of the A 3 Ga 5 S 9 ·xH 2 O framework coupled with effective UO 2 2+ ···S 2– bonding interactions makes it a good potential sorbent for uranyl remediation from aqueous media.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Thermodynamic assessment of lithium halide reciprocal salt systems for energy applications
Lithium halides are of interest because of their unique applications as fuel or coolants in molten salt reactors (MSRs) and electrolytes in thermally activated batteries. Because iodine is an important fission product for MSRs, the Molten Salt Thermal Properties Database-Thermochemical (MSTDB-TC) is being expanded to include relevant iodide reciprocal salt systems. In this work, we assess the thermochemical properties of lithium halide pseudobinary systems based on reported experimental phase diagrams, eutectic temperatures, and enthalpies of mixing. Within the framework of the modified quasi-chemical model in the quadruplet approximation (MQMQA), extrapolations to the related pseudoternary and pseudoquaternary systems have been performed. The pseudoquaternary representations of phase equilibria, enthalpy, entropy, and heat capacity are represented in the resultant models. Of interest for generating source terms for accident analysis is the ability to compute the vapor pressures of the dominant iodide species for the systems at any composition. Here, an example of such calculations is provided for the LiF-LiI system at x LiI = 0.01 and x LiI = 0.70, in this case indicating that the LiI vapor species are predominant.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Luminescence and Scintillation in the Niobium Doped Oxyfluoride Rb4Ge5O9F6:Nb
A new niobium-doped inorganic scintillating oxyfluoride, Rb4Ge5O9F6:Nb, was synthesized in single crystal form by high-temperature flux growth. The host structure, Rb4Ge5O9F6, crystallizes in the orthorhombic space group Pbcn with lattice parameters a = 6.98430(10) Å, b = 11.7265(2) Å, and c = 19.2732(3) Å, consisting of germanium oxyfluoride layers made up of Ge3O9 units connected by GeO3F3 octahedra. In its pure form, Rb4Ge5O9F6 shows neither luminescence nor scintillation but when doped with niobium, Rb4Ge5O9F6:Nb exhibits bright blue luminescence and scintillation. The isostructural doped structure, Rb4Ge5O9F6:Nb, crystallizes in the orthorhombic space group Pbcn with lattice parameters a = 6.9960(3) Å, b = 11.7464(6) Å, and c = 19.3341(9) Å. X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) measurements suggest that the niobium is located in an octahedral coordination environment. Optical measurements inform us that the niobium dopant acts as the activator. The synthesis, structure, and optical properties are reported, including radioluminescence (RL) measurements under X-ray irradiation.
Carone, Darren (ORCID:0000000164014098)↗
Modeling Metallic Halide Local Structures in Salt Melts Using a Genetic Algorithm
Not provided.
Chemistry↗
In Situ Determination of Speciation and Local Structure of NaCl–SrCl 2 and LiF–ZrF 4 Molten Salts
Understanding the local environment of the metal atoms in salt melts is important for modeling the properties of melts and predicting their behavior and thus helping enable the development of technologies such as molten salt reactors and solar-thermal power systems and new approaches to recycling rare-earth metals. Toward that end, we have developed an in situ approach for measuring the coordination of metals in molten salt coupling X-ray absorption spectroscopy (XAS) and Raman spectroscopy. Our approach was demonstrated for two salt mixtures (1.9 and 5 mol % SrCl 2 in NaCl, 0.8 and 5 mol % ZrF 4 in LiF) at up to 1100 °C. Near-edge (X-ray absorption near-edge structure, XANES) and extended X-ray absorption fine structure (EXAFS) spectra were measured. The EXAFS response was modeled using ab initio FEFF calculations. Strontium’s first shell is observed to be coordinated with chlorine (Sr 2+ –Cl – ) and zirconium’s first shell is coordinated by fluorine (Zr 4+ –F – ), both having coordination numbers that decrease with increasing temperature. Multiple zirconium complexes are believed to be present in the melt, which may interfere and distort the EXAFS spectra and result in an anomalously low zirconium first shell coordination number. Finally, the use of boron nitride (BN) powder as a salt diluent for XAFS measurements was found to not interfere with measurements and thus can be used for investigations of such systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗