Engineering topics

Scholl, James W.

Publications and source records attributed to Scholl, James W..

8 records

NASA NTRS1993

Using APART for wall visibility calculations in the calibration channel of wide field planetary camera II

The cone visibility from the CCD detector array plane in the calibration channel of wide field planetary camera II (WFPC II) is analyzed, using APART, for three representative wavelengths as characterized by indices of refraction. The light pipe walls are visible from the corners of the equivalent CCD detector array when imaging with the smallest index of refraction, n = 1.375. Painting the inside of the light pipe walls will result in a decrease in their visibility.

Scholl, James W.↗

NASA NTRS1991

Stray light issues for background-limited infrared telescope operation

Analytical expressions for the photon radiance and its derivative in the spectral band from 400 to 700 microns are presented in a graphic form as a function of temperature for the cryogenic temperatures from 1 to 8 K. The temperature dependence of photon radiance and its derivative have been applied to a background-limited telescope to determine the temperature tolerances. It is concluded that the application of the background-limited telescope operation concept to the telescope operational requirements results in a reduction in the telescope temperature, i.e., an increase in temperatures for the most components, and a prolonged telescope facility lifetime.

Scholl, Marija S.↗

NASA NTRS1990

Time dependency of temperature of a laser-irradiated infrared target pixel as a low-pass filter

The thermal response of a surface layer of a pixel on an infrared target simulator is discussed. This pixel is maintained at a constant temperature by a rapidly scanning laser beam. An analytical model has been developed to describe the exact temperature dependence of a pixel as a function of time for different pixel refresh rates. The top layer of the pixel surface that generates the gray-body radiation shows the temperature dependence on time that is characteristic of a low-pass filter. The experimental results agree with the analytical predictions. The application of a pulsed laser beam to a noncontact, nondestructive diagnostic technique of surface characterization for the presence of microdefects is discussed.

Scholl, Marija S.↗

NASA NTRS1988

Laser agile illumination for object tracking and classification - Feasibility study

The 'agile illumination' concept for discrimination between ICBM warheads and decoys involves a two-aperture illumination with coherent light, diffraction of light by propagation, and a resulting interference pattern on the object surface. A scanning two-beam interference pattern illuminates one object at a time; depending on the shape, momentum, spinning, and tumbling characteristics of the interrogated object, different temporal signals will be obtained for different classes of objects.

Scholl, Marija S.↗

NASA NTRS1988

Diffraction effects on infrared-system performance

An expression for the incidence detected by an ideal quantum detector is derived using incoherent imaging of square waves with one wavelength or in a wavelength band. The detected incidence contains a correction term that becomes appreciable when the width of the square waves becomes comparable in size to the F-number of the imaging system. The correction term is evaluated for a Lambertian self-radiating body with stripes at two temperatures. The quality of the detected image is shown to depend on the temperatures and the dimensions of the body, the wavelength band of the detection system, and the F-number of the imaging system.

Scholl, Marija S.↗

NASA NTRS1988

Measurement of small temperature fluctuations at high average temperature

Both absolute and differential temperature measurements were simultaneously performed as a function of time for a pixel on a high-temperature, multi-spectral, spatially and temporally varying infrared target simulator. A scanning laser beam was used to maintain a pixel at an on-the-average constant temperature of 520 K. The laser refresh rate of up to 1 kHz resulted in small-amplitude temperature fluctuations with a peak-to-peak amplitude of less than 1 K. The experimental setup to accurately measure the differential and the absolute temperature as a function of time is described.

Scholl, James W.↗

NASA NTRS1987

Time- and position-varying infrared scene simulation

Rapidly changing infrared scenes can be generated as a function of position using thermally produced irradiance. This can be done most conveniently by using a variable dwell-time, variable diameter, and scanning laser beam to deposit a predetermined amount of laser energy, as a function of position, on the target surface. An infrared target simulator has been designed and tested to perform within stringent temperature simulation requirements: heating rate of over 100 K/sec is achieved, and temperature gradients of 200 K/mm can be maintained. Problems with heat transfer between adjacent elements at different temperatures are solved by modeling the thermal layer on the target surface as a low-pass filter, which cuts off all the frequencies above the thermal cutoff frequency. When the system approach is taken to the infrared simulation design, the optical system limited performance results in the best realizable performance. In this case, the thermal layer on the target surface is designed so that the thermal cutoff frequency is above the optical cutoff frequency.

Scholl, Marija S.↗

NASA NTRS1987

Cockpit readiness for night vision goggles

The introduction of night vision goggles into the cockpit environment may produce incompatibility with existing cockpit optoelectronic instrumentation. The methodology used to identify the origin of the spurious signal is demonstrated with the example of an electronic display. The amount of radiation emitted by a gray body in the wavelength region of goggle sensitivity is calculated. A simple procedure for preflight testing of cockpit instrumentation using a commercially available infrared camera is recommended. Other recommendations include the specification of cocklpit instrumentation for compatibility with night vision devices.

Scholl, Marija S.↗