Engineering topics
Publications and source records attributed to Schmidt, L. F..
Accuracy increased by measuring small torque differences directly. Input and output torques are balanced by mechanical linkage in transmission-testing apparatus. Force applied to load cell proportional to frictional torque loss in transmission. Apparatus measures portion of input torque lost to friction in automotive transmissions or other gearbox. Apparatus more sensitive than previous measuring systems.
One of the detectors is an illumination detector consisting of two spaced apart elongated strips with a strip of cadmium sulphide (Cds) deposited therebetween. Whenever the line image impinges the CdS strip, the resistance between the two other strips is relatively low, while being high when the line image is outside the field of view of the illumination detector. Also included is a sun angle detector which consists of a vapor deposited resistor strip connected at one end to plus 10v and at the other end to minus 10v. Spaced apart from the resistor strip is an elongated strip of low resistance material acting as an output strip, with a CdS strip between the two strips. When the line image is within the field of view of the sun angle detector, the output voltage at the output strip depends on the position of the line image across the sun angle detector.
Modified wideangle analog cruise sun sensor coupled with changes in optic attitude correction capabilities, eliminate need of acquisition and sun gate sensors, making on-course navigation of spacecraft flying interplanetary missions less risky and costly. Operational characteristics potentially make system applicable to guidance and control of solar energy collection systems.
System uses scheme which does not respond to redundant data. Encoded sensor output signals are transferred to central processing unit only when change occurs in encoded 12-bit word.
Lens has 2:1 focal-length ratio, consists of three spherical and two cylindrical elements, and is 7.6 cm in length. When used in conjunction with image dissector tube, expected root-mean-square noise equivalent angle is approximately 8 arc seconds.
Short-arc xenon lamp proposes to produce more uniform solar output. With this lamp, both axes of sensors can be tested with same setup. Lamp includes cathode with conical tip and annular anode. Annulus is supported by angled projection to avoid interference with passage of light generated by arc.
Arrangement combines acquisition and gate functions and reduces sensitivity so that attitude control is effective regardless of changes in solar intensity. There are five photoconductive detectors all electrically interconnected. Detectors are so positioned that, regardless of spacecraft orientation at any instant of interest, at least one detector is illuminated.
Method for correcting orientation of spacecraft with respect to sun is discussed. System consists of two photocells on either side of sensor. When photocells are evenly illuminated, no output is made from sensor. When photocells are unevenly illuminated, sensor sends signal to gas jets to change orientation.
Objective lens produces a backwardly curving image of a star field that matches the similarly curved surface of the photocathode of an image dissector tube. Lens eliminates the need for a fiber-optics translation between the flat plane image and curved photocathode.
Photodetector and sun sensor development for Mariner Mars 1969 attitude control system
Computer program uses the principles of geometrical optics to design optical systems containing up to 100 planes, conic or polynomial aspheric surfaces, 7 object points, 6 colors, and 200 rays. This program can be used for the automatic design of optical systems or for the evaluation of existing optical systems.
Computer program uses geometrical optical techniques and a least squares optimization method employing computing equipment for the automatic design of optical systems. It evaluates changes in various optical parameters, provides comprehensive ray-tracing, and generally determines the acceptability of the optical system characteristics.
Digital computer program using geometrical optical techniques for automatic design of optical systems
Photosensitive light source device for detecting unmanned spacecraft deviation from reference attitude
To measure the direction of the sun over a spherical field of view, a cube-shaped solar sensor with a photocell on each side is used. The outputs from the six cells are fed into a computer for determining the position of the sun relative to an orthogonal coordinate system.