Engineering Papers⌕ Search

Engineering topics

Scharton, T. D.

Publications and source records attributed to Scharton, T. D..

26 records · Page 2

Relation between near field and far field acoustic measurements

Several approaches to the problem of determining the far field directivity of an acoustic source located in a reverberant environment, such as a wind tunnel, are investigated analytically and experimentally. The decrease of sound pressure level with distance is illustrated; and the spatial extent of the hydrodynamic and geometric near fields, the far field, and the reverberant field are described. A previously-prosposed analytical technique for predicting the far field directivity of the acoustic source on the basis of near field data is investigated. Experiments are conducted with small acoustic sources and an analysis is performed to determine the variation with distance from the source of the directionality of the sound field. A novel experiment is conducted in which the sound pressure measured at various distances from an acoustic driver located in the NASA Ames 40 x 80 ft wind tunnel is crosscorrelated with the driver excitation voltage.

Bies, D. A.↗

A Study of Trailing Edge Blowing as a Means of Reducing Noise Generated by the Interaction of Flow with a Surface

A system for reducing the noise generated when a jet impinges against a flap is described. The eddies formed by the alternate zones of positive and negative pressure on the flap surface are identified as the sound source. In the proposed concept, a stream of low velocity secondary air is ejected from a slot near the trailing edge of the flap as a buffer between the flap and the primary air jet to reduce the intensity of the fluctuating surface pressure field near the flap edge and thus reduce the intensity of the aerodynamic noise.

Scharton, T. D.↗

Acoustic transmission through a fuselage sidewall

A definition is given of an idealized fuselage sidewall structure and a simplified analytical model for determining acoustical transmission from the exterior to the interior of a fuselage was constructed. The representation of the sidewall structure chosen for the analytical model excludes complicating effects such as cabin pressurization, acoustic transmission through windows or door seal leaks, aerodynamic excitation, and structural vibration excitation of the fuselage skin.

Wilby, J. F.↗

A preliminary evaluation of noise reduction potential for the upper surface blown flap

An assessment of the basic acoustic characteristics and noise reduction potential of an upper surface blown flap consisting of a rectangular nozzle and a single turning flap which was designed to approximate a typical takeoff setting is presented. The noise reduction concepts studied were: (1) replacing a section of the flap trailing edge with a porous material and (2) active modification of the flow field using blowing near the trailing edge. Diagrams of the airfoil section and test equipment are provided. Photographs of airflow conditions across the aerodynamic surface are included.

Hayden, R. E.↗

Shock transmission in coupled beams and rib stiffened structures

Shock transmission in a simple coupled beam structure and in a ring-stringer stiffened cylinder is investigated experimentally and analytically using wave transmission and statistical energy analysis concepts. The use of the response spectrum to characterize the excitation provided to a simple beam by a force pulse is studied. Analysis of the transmission of a dilatation wave in a periodically stiffened plate indicates that the stiffeners are fairly transparent to the wave, but some of the dilatational energy is scattered into bending at each support.

Pope, L. D.↗