Engineering Papers⌕ Search

Engineering topics

Scarlat, Raluca O.

Publications and source records attributed to Scarlat, Raluca O..

At least 19 records

Elucidating the role of Cr migration in Ni-Cr exposed to molten FLiNaK via multiscale characterization

Structural materials used in nuclear reactor environments are subjected to coupled extremes such as high temperature, irradiation, and corrosion which act in concert to degrade their functional performance. Connecting alloy microstructure such as grain boundaries, and accumulating point defects with corrosion attack and pore morphology is critical to understanding underlying mechanisms. We uncover the compositional variations and morphology at multiple length scales in corrosion-damaged Ni-Cr alloy after exposure to oxidants in molten fluoride salts. A complex network of dense corrosion pores is detected by surface-level SEM observations. The corrosion pores take on a 1-dimensional morphology and are enriched with Ni and depleted of Cr 1–5 µm from the pore surface. STEM-EDS and 4D-STEM strain maps acquired simultaneously highlight the local variations in composition and structure of a ≤ 200 nm Cr-rich layer identified from a cross-section taken at the bottom of an isolated corrosion pore between the Ni-Cr alloy matrix and the embedded salt. However, the absence of an observed interface between the Ni-Cr alloy matrix and the FCC-structured Cr-rich layer suggests that Cr plating from the salt did not transpire. These findings support a proposed Cr lattice diffusion mechanism rather than Cr-precipitation from the salt to accommodate temperature transient conditions during sample cooling. Through the development of a 1D phase field model, these results are rationalized by formation energies for the Ni- and Cr-oxidation into the molten salt. This study reveals the locally altered microstructure caused by high temperature corrosion in non-steady-state molten salt nuclear reactor environments.

36 MATERIALS SCIENCE↗

Optical spectroscopy of molten fluorides: Methods, electronic and vibrational data, structural interpretation, and relevance to radiative heat transfer

In this study, to help address the need for predicting radiative heat transfer (RHT) behavior of molten salts, we conducted a comprehensive review of methods and data from optical spectroscopic measurements on molten fluoride salts. Transmittance, reflectance, and trans-reflectance experimental methods are discussed, along with the corresponding data reduction methodology and the limitations of each technique. Optical spectroscopy is a convenient indirect probe for changes in structural parameters with temperature and composition. Electronic and vibrational absorption data for transition-metal, lanthanide, and actinide solutes and vibrational absorption data for alkali and alkaline earth fluoride solvents are compiled, and the corresponding structural interpretation is discussed and compared with other experimental and theoretical work. We find that solvent and solute vibrational absorption can be significant in the mid-infrared, resulting in near-infrared edges of significance to RHT. Extrapolation and averaging of existing edge data leads to estimated gray absorption coefficient values at 700 °C of 546 m —1 for FLiBe and 276 m —1 for FLiNaK, both within the range of 1 – 6000 m —1 identified to be of engineering relevance for radiative heat transfer analysis.

36 MATERIALS SCIENCE↗

The corrosion effects of neutron activation of 2LiF-BeF 2 (FLiBe)

The redox effect of activation reactions in molten salts has been previously qualitatively defined but never quantified. Here, we quantify the corrosion effects of neutron activation of FLiBe. Rates of change of activation products are computed for FHR and ARC. The impact of activation reactions on salt chemistry is quantitatively compared to other environmental effects of similar consequences on the salt. The results are applied to a redox control case-study and an irradiation-corrosion experiment. The results are presented in a manner useful to the reactor chemist and designer concerned with corrosion and chemistry control and tritium management in irradiated FLiBe, and design of salt-irradiation experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Correcting thermal-emission-induced detector saturation in infrared spectroscopy

We found that temperature-dependent infrared spectroscopy measurements (i.e., reflectance or transmittance) using a Fourier-transform spectrometer can have substantial errors, especially for elevated sample temperatures and collection using an objective lens. These errors can arise as a result of partial detector saturation due to thermal emission from the measured sample reaching the detector, resulting in nonphysical apparent reduction of reflectance or transmittance with increasing sample temperature. Here, we demonstrate that these temperature-dependent errors can be corrected by implementing several levels of optical attenuation that enable convergence testing of the measured reflectance or transmittance as the thermal-emission signal is reduced, or by applying correction factors that can be inferred by looking at the spectral regions where the sample is not expected to have a substantial temperature dependence.

47 OTHER INSTRUMENTATION↗

Infiltration of molten fluoride salts in graphite: Phenomenology and engineering considerations for reactor operations and waste disposal

The possibility and consequences of salt-infiltration in graphite must be evaluated for graphite used in molten salt reactors (MSRs) and fluoride-salt-cooled high-temperature reactors (FHRs), which can be subjected to salt pressures as high as 500 kPa. The volume of graphite porosity infiltrated by salt can be measured by direct infiltration and it can be predicted from the graphite pore size distribution, the surface tension of the salt, and the contact angle between the graphite and the salt. While these three properties are believed to be insensitive to irradiation, the former can be impacted by chronic or acute oxidation, and the latter two are highly sensitive to the chemistry of the salt and to events such as air ingress. For MSRs, predictions based on nominal properties of salt and graphite reveal that few graphite grades would satisfy the 4 vol% limit set in the Molten Salt Reactor Experiment, and even fewer would satisfy the 0.5 vol% design target. For FHRs, infiltration limits have not been defined and depend on the effect of infiltration on graphite properties, which are discussed. A hypothesis is presented for properties that may be impacted by infiltration and for which future studies are needed.

36 MATERIALS SCIENCE↗

Constant-potential molecular dynamics simulations of molten salt double layers for FLiBe and FLiNaK

We report the results of constant-potential molecular dynamics simulations of the double layer interface between molten 2LiF–BeF 2 (FLiBe) and 23LiF–6NaF–21KF (FLiNaK) fluoride mixtures and idealized solid electrodes. Employing methods similar to those used in studies of chloride double layers, we compute the structure and differential capacitance of molten fluoride electric double layers as a function of applied voltage. The role of molten salt structure is probed through comparisons between FLiBe and FLiNaK, which serve as models for strong and weak associate-forming salts, respectively. In FLiBe, screening involves changes in Be–F–Be angles and alignment of the oligomers parallel to the electrode, while in FLiNaK, the electric field is screened mainly by rearrangement of individual ions, predominantly the polarizable potassium cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Radiation-Induced Defects on Corrosion

The next generation of nuclear reactors will expose materials to conditions that, in some cases, are even more extreme than those in current fission reactors, inevitably leading to new materials science challenges. Radiation-induced damage and corrosion are two key phenomena that must be understood both independently and synergistically, but their interactions are often convoluted. In the light water reactor community, a tremendous amount of work has been done to illuminate irradiation-corrosion effects, and similar efforts are under way for heavy liquid metal and molten salt environments. While certain effects, such as radiolysis and irradiation-assisted stress corrosion cracking, are reasonably well established, the basic science of how irradiation-induced defects in the base material and the corrosion layer influence the corrosion process still presents many unanswered questions. In this review, we summarize the work that has been done to understand these coupled extremes, highlight the complex nature of this problem, and identify key knowledge gaps.

36 MATERIALS SCIENCE↗

Kinetics and transport of hydrogen in graphite at high temperature and the effects of oxidation, irradiation and isotopics

The kinetics of uptake and desorption impact the performance of graphite as a vector for tritium in high-temperature fission reactors and in the blanket of fusion reactors. Graphite components in these reactors are exposed to temperatures > 500 °C and H 2 partial pressures of few Pa and desorption temperatures are limited to < 1600 °C; limited data is available at these conditions. Here we review the mechanisms for uptake in, transport and desorption of hydrogen from graphite at high temperature, compiling data on uptake rates, diffusion coefficients and activation energies and providing a discussion of the impact of irradiation, pre-oxidation and isotope. At FHR conditions, trapping impacts uptake rates, leading to a reduction in apparent diffusivity by 35 to 80% compared to higher partial-pressure uptake. Timelines for desorption are not clearly defined; extrapolating from available data, at 1150 °C desorbing 80% of tritium uptaken at FHR conditions may take from 100 to 10,000 h.

36 MATERIALS SCIENCE↗

An electrochemical study of hydrogen in molten 2LiF-BeF 2 (FLiBe) with addition of LiH

The chemical and transport behavior of hydrogen isotopes in molten 2LiF-BeF 2 (FLiBe) is of interest for the design of tritium management systems in nuclear fission and fusion reactors that use FLiBe. The chemical reaction of LiH with FLiBe is used to introduce hydrogen in the molten salt and electrochemical methods are used for in situ studies of hydrogen in FLiBe. LiH reacts with molten FLiBe to generate an electroactive species whose voltammetry peak is proportional to the added quantity of LiH. The cyclic voltammetry reaction potential of 2.009 ± 0.050 V vs Be/Be 2+ and the electron exchange of n = 0.8 ± 0.5 are consistent with the one-electron oxidation of dissolved H in the zero valence state, H o to H + . The concentration of H o is estimated by linear sweep voltammetry at 60–80% of the hydrogen introduced by the reaction of 0.42 mol% LiH with FLiBe and after eleven hours it remains above 40%. It is postulated that covalent BeH 2 is formed in FLiBe upon LiH addition, as a FLiBe-soluble quasi-stable intermediate product. Furthermore, the results provide an evaluation of LiH as a means of introducing dissolved hydrogen in FLiBe, enabling electrochemical methods as tools to advance the understanding of the chemistry of hydrogen isotopes in FLiBe.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radiative heat transfer in FLiBe molten salt participating medium in a vertical heated tube under forced and mixed convection laminar flows

The contribution of radiative heat transfer (RHT) to convective heat transfer in a heated vertical pipe with laminar flow and constant wall temperature, for FLiBe molten salt, is investigated computationally. The combined effects of conduction in the fluid, forced convection, buoyancy, temperature-dependent physical properties, and thermal radiation are investigated. The P1 approximation is employed in the discretization of the Radiative Transfer Equation (RTE). The COMSOL Multiphysics software is used to generate the numerical solutions. The theoretical analysis developed here demonstrates that only for intermediate values of the optical thickness, i.e. τ D ~ O 1 , the participating media effects are expected to be important. This analysis is confirmed computationally and a value of τ D ≈ 4 is shown to lead to the highest increase in overall heat transfer behavior. Under forced convection, the Nusselt ratio N u total / N u no - rad reaches a peak value of 1.76 at τ D = 4 and z/D = 200 , and is less than 1.1 for τ D < 0 . 1 and τ D > 60 . Under aiding-flow mixed convection, N u total / N u no - rad reaches a peak of 1.34 at τ D = 4 . 2 and is less than 1.1 for τ D < 0 . 4 and τ D > 36 . Under opposing-flow mixed convection, Nu total / Nu no - rad reaches a peak of 1.81 at τ D = 4 . 2 and is less than 1.1 for τ D < 0 . 2 and τ D > 50 . RHT effects on the overall heat transfer are most pronounced in opposing mixed convection, where N u total / N u no - rad is 2.26 observed at z/D = 50 . The sensitivity to wall emissivity is evaluated; in forced convection, the peak N u total / N u no - rad is 1.66 at ε = 0 (reflective wall) and 2.04 at ε = 1 (absorptive wall). Finally, the sensitivity to pipe diameter is also discussed. Overall, for a vertical heated tube, radiative heat transfer effects lead to enhancement of heat transfer by as high as a factor of two, and they depend on the optical thickness of the flow, mixed convection environment ( Gr / R e 2 and direction of flow relative to the gravitational force), surface emissivity, and entrance effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development and Demonstration of an In-Situ Tritium Scavenger

The objective of this project was to use an inherent feature of salt-cooled reactors towards the capture and removal of tritium from the primary coolant system: the presence of the graphite moderator. The fuel elements fluoride-salt cooled high-temperature (FHR) reactors consist of a graphite matrix that encapsulates TRISO fuel particles, and the total fuel element surface area of Mark I PB-FHR is 7780 m 2 . Therefore the FHR fuel inherently provides removable graphite of high surface area. The goal of this project was to understand the transport of tritium across the salt-graphite interface. The following was achieved: 1. Electrochemical techniques were demonstrated for studying the entry, diffusion, and trapping of hydrogen isotopes in graphite. 2. Electrochemical techniques were used to demonstrate the relationship between galvanic corrosion between graphite and stainless steel 316 and hydrogen uptake in graphite. 3. Electrochemical techniques were demonstrated for studying the dissolution and diffusion of hydrogen isotopes in molten FLiBe. 4. Thermodynamic reference electrodes were tested for FLiBe and FLiNaK. 5. Electrochemical techniques were demonstrated as an in-salt hydrogen thermal desorption measurement, which had previously only been achieved in gas environments. 6. FLiBe exposure of graphite lead to graphite fluorination and an increase of defects, which indicate an increase of reactive carbon sites available for tritium uptake. 7. TRIDENT modeling was used to perform sensitivity analysis of FHR design parameters on tritium uptake fraction in graphite, showing high sensitivity to tritium diffusivity and solubility. 8. A cross-cutting effort with another NEUP-funded project was initiated for application of the SAM mass-transport module to system-scale tritium modeling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Redox potential control in molten salt systems for corrosion mitigation

In a molten salt nuclear reactor system, the redox potential must be controlled for mitigating corrosion of structural materials. The paper presented a critical review on the available knowledge of redox potential control in molten fluoride salt systems. The major potential contaminants that affect the redox potential and material corrosion are TF, oxides, hydroxides, and various metal fluorides. Redox potential control methodologies include gas sparging, contacting the salt with a reducing metal, and adding soluble salt redox buffers to the salt. Redox potential measurement technologies include electrochemical sensors and optical spectroscopy. This work also analyzed the current technology issues and recommended near future studies.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

FLiBe Radiative Heat Transfer

The liquid fluoride salt, FLiBe (2LiF-BeF2), has been proposed as a working fluid for Fluoride-Salt-Cooled High-Temperature Reactor (FHR) due to its desirable heat transport properties at high temperatures (500-700°C) as well as compatibility with graphite and several metals [1]. Due to the 4th power temperature dependence and the high temperature differences present in the various FHR heat exchangers (TCHX, DHX, and CTAH), radiative heat transfer in molten salt FLiBe may be important compared to natural or forced convection. Furthermore, because of the strong coupling between the temperature and velocity profiles, emission and absorption of radiation within the salt may significantly impact the thermal and hydrodynamic behavior of the fluid in the natural circulation systems of FHR. The present work investigates the significance of radiative transfer within the salt on the overall thermal energy conservation equation, and consequently the overall convective and radiative heat transfer coefficient. The purpose is to understand the radiative heat transfer effect on the steady-state energy equation for a moving salt in a 2D channel by computing a total Nusselt number that incorporates both radiation and convection. Moreover, the evolution of the thermal entrance region is of a particular importance because of the high heat transfer coefficients attainable and the effect on the potential onset of various salt physical phenomena, like freezing and supercooling, as well as on the design of the passive decay heat removal systems of FHR, which are mostly buoyancy-driven pipe flow systems.

Derdeyn, Will↗

Study of Tritium Transport in Nuclear-Grade Graphite and Molten Fluoride Salt Systems

High-temperature salts are proposed as coolant in recent reactor technologies including Fluoride Salt-Cooled High Temperature Reactor (FHR) with fluoride salt as primary and secondary loop coolant, Molten Salt Reactors (MSRs) with fuel salt, and high-magnetic-field fusion machines with salt coolant blanket. The baseline coolant is {sup 7}Li{sub 2}BeF{sub 4} (flibe) due to its good thermal-hydraulic and neutronic properties. Tritium produced in flibe due to neutron irradiation makes the issue of tritium transport an area of great interest. In the temperature range of 427- 704 deg. C, tritium readily diffuses through metallic reactor structural materials, which makes tritium control and capture a key technical challenge. It is anticipated that tritium can be captured by graphite, as graphite material showed a high affinity for tritium in the Molten Salt Reactor Experiment (MSRE) due to the porous and irregular crystallite microstructure. Two types of nuclear grade graphite which used as core components for FHR: matrix graphite, which encapsulates the TRISO (Tri-structural-isotropic) fuel particles in FHR, and high purity, isotropic nuclear grade graphite IG-110 which can be used as moderator and reflector in reactor core for both fission and fusion reactor. The microstructure of matrix graphite and IG-110 is different from that of matrix graphite, due to the raw material and manufacturing processes. There are three phenomena important for predicting tritium transport in graphite-salt systems: tritium species diffusion in molten flibe; tritium species transport at the salt-graphite interface; and tritium species transport in graphite. In this summary microstructure characterization of IG-110 and matrix graphite, characterization of graphite-salt interface as well as techniques for trace tritium detection in graphite are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗