Engineering Papers⌕ Search

Engineering topics

Saunders, R. S.

Publications and source records attributed to Saunders, R. S..

At least 91 records · Page 5

Dunes in the north polar region of Mars - Their possible formation from low-density sedimentary aggregates

Low-density aggregates composed of submicron clay aerosols were formed experimentally as the sublimation residues of masses of dust-nucleated ice. These ice-dust mixtures are considered to be possible analogs of materials of Martian north polar deposits. Low-density (0.002 g/cu cm) spheroidal pellets formed from these materials in wind tunnel experiments are studied as possible candidates for the formation of dunes in the north polar region of Mars. It is shown that these particles move like sand grains under conditions of saltation and, taken in sufficient quantities, can form the dunes observed in the north circumpolar erg.

Saunders, R. S.↗

Mars: Seasonally variable radar reflectivity

Since reflectivity is a quantity characteristic of a given target at a particular geometry, the same (temporally unchanging) target examined by radar on different occasions should have the same reflectivity. Zisk and Mouginis-Mark noted that the average reflectivities in the Goldstone Mars data increased as the planet's S hemisphere passed from the late spring into early summer. The same data set was re-examined and the presence of the phenomenon of the apparent seasonal variability of radar reflectivity was confirmed. Two objections to these findings are addressed: (1) reflectivity variations may be present in the Goldstone Mars data as a result of an instrument/calibration error; and (2) the variations were introduced into the analysis through comparing reflectivities from two incompatible subsets of the data.

Roth, L. E.↗

Venus - Summary and review of science research activities 1983-87

The geology, geomorphology, and atmosphere of Venus are characterized on the basis of observations obtained with the Soviet Venera 15 and 16 spacecraft (including two international Vega balloon experiments), the Pioneer Venus Orbiter, and the Arecibo radio telescope during the period 1983-1986. Features discussed include impact craters, evidence of tectonic and volcanic activity, the high average age of the Venusian surface (apparently over 1 Gyr, indicating resurfacing rates much lower than on earth), and atmospheric temperature differences across the equator.

Saunders, R. S.↗

Lunar and Venusian radar bright rings

Twenty-one lunar craters have radar bright ring appearances which are analogous to eleven complete ring features in the earth-based 12.5 cm observations of Venus. Radar ring diameters and widths for the lunar and Venusian features overlap for sizes from 45 to 100 km. Radar bright areas for the lunar craters are associated with the slopes of the inner and outer rim walls, while level crater floors and level ejecta fields beyond the raised portion of the rim have average radar backscatter. It is proposed that the radar bright areas of the Venusian rings are also associated with the slopes on the rims of craters. The lunar craters have evolved to radar bright rings via mass wasting of crater rim walls and via post-impact flooding of crater floors. Aeolian deposits of fine-grained material on Venusian crater floors may produce radar scattering effects similar to lunar crater floor flooding. These Venusian aeolian deposits may preferentially cover blocky crater floors producing a radar bright ring appearance. It is proposed that the Venusian features with complete bright ring appearances and sizes less than 100 km are impact craters. They have the same sizes as lunar craters and could have evolved to radar bright rings via analogous surface processes.

Thompson, T. W.↗

Goldstone solar system radar

Information is provided about physical nature planetary surfaces and their topography as well as dynamical properties such as orbits and spin states using ground based radar as a remote sensing tool. Accessible targets are the terrestrial planets: the Earth's Moon, Mercury, Venus and Mars, the outer planets rings and major moons, and many transient objects such as asteroids and comets. Data acquisition utilizes the unique facilities of the Goldstone Deep Space Network, occasionally the Arecibo radar, and proposed use of the VLA (very large array).

Jurgens, R. F.↗

How to make a comet

The primary mandate of NASA is the study of the nature and origin of the solar system. The study of comets provides information about conditions and processes at the beginning of the solar system. Short period comets and their relatives, the near Earth asteroids may prove to be second only to the Sun in importance to the long term survival of civilization for two reasons: as a possible candidate for the cause of mass extinctions of life on Earth and as the material means for the expansion of civilization into the solar system and beyond. In the mean time comets are studied by remote means. Laboratory investigations using synthetic cometary materials may add to the knowledge of these interesting objects. Dust and mantle formation are currently being studied by the use of comet sublimation experiments. Results of these experiments are discussed.

Stephens, J.↗

Properties of filamentary sublimation residues from dispersions of clay in ice

Results are reported from experimental studies of the formation of ice mixed with mineral particles in an effort to simulate similar processes on natural surfaces such as at the Martian poles, on comet nuclei and on icy satellites. The study consisted of low-pressure, low-temperature sublimations of water ice from dilutions of water-clay (montmorillonite and Cabosil) dispersions of various component ratios. Liquid dispersions were sprayed into liquid nitrogen to form droplets at about -50 C. Both clay-water dispersions left a filamentary residue on the bottom of the Dewar after the water ice had sublimated off. The residue was studied with optical and SEM microscopy, the latter method revealing a high electrical conductivity in the residue. The results suggest that the sublimation of the water ice can leave a surface crust, which may be analogous to processes at the Martian poles and on comet nuclei. The process could proceed by the attachment of water molecules to salt crystals during the hottest part of the Martian year. The residue remaining was found to remain stable up to 370 C, be porous, and remain resilient, which could allow it to insulate ice bodies such as comets in space.

Saunders, R. S.↗

The Support of Long Wavelength Loads on Venus

One of the great surprises of the Pioneer Venus mission was the high degree of correlation between topography and gravity found at all wavelengths. This implies a close relationship between topography and lateral subsurface density anomalies, such as those due to passive or dynamic compensation. Sleep-Phillips type compensation model with a variable crustal thickness and a variable upper mantle density was developed. The thin shell theory was used to investigate three end member cases: (1) loading by topographic construction, resulting in a downward deflection of the surface (no mantle support); (2) completely compensated support of a constructional load (no surface deflection); and (3) topography due entirely to upward deflection of the surface supported by a low density upper mantle (no surface load). In general, the models imply relatively thick crust and dense upper mantle for Ishtar Terra and Ovda Regio (western Aphrodite), thinned crust and buoyant upper mantle for Tethus Regio and regions near Sappho and Alpha Regio, and a nearly uniform crust with a buoyant upper mantle for Beta Regio and Atla Regio (eastern Aphrodite).

Benerdt, W. B.↗

Transformation of Polar Ice Sublimate Residue into Martian Circumpolar Sand

The experimental demonstration that a credible Martian sand may be formed from dust-bearing ice provides a new set of possible explanations for some of the observed Martian aeolian landforms. It is hypothesized that a light-weight fluffy rind is formed on the polar caps. This could provide material easily entrainable by Martian winds, which generally blow equatorward from the poles. These winds would peel the fluffy rind from the surface of the sublimating summer polar caps and from the equatorward slopes of the polar troughs. These pieces of material would then be rolled into lumps (of high sailarea/mass ratio) by the wind. They would become pigmented as they saltate across the surface, perhaps gathering carbonaceous meteoritic dust or other impurities on their surfaces, or through chemical reactions with the ice-free environment away from their point of origin. Once they became trapped in topographic wind shadows, they would form dune structures because they are hydraulically equivalent to sand particles.

Saunders, R. S.↗

Properties of Filamentary Sublimation Residues from Dispersions of Clay in Ice

The properties of sublimate residues are of considerable interest in studies of the thermal modeling of Martian and cometary ice surfaces. The study of the formation of sand grains from this mantle on Martian polar ice is also supported by these experiments. To understand these properties, a series of low temperature vacuum experiments were run during which dirty ices that might be expected to be found in Martian polar caps and in comet nuclei were made and then freeze dried. In addition to using particulate material of appropriate grain size and minerology, particle nucleated ices were simulated by dispersing the particulates in the ice so that they did not contact one another. This noncontact dispersion was the most difficult requirement to achieve but the most rewarding in that it produced a new filamentary sublimate residue that was not a relic of the frozen dispersion. If the siliceous particles are allowed to touch one another in the ice the structure of the contacting particles in the ice will remain as a relic after the ice is sublimed away.

Stephens, J. B.↗

Radar and the Detection of Liquid Water on Mars

Detection of the seasonally variable radar reflectivity in the Goldstone Mars data (the Solis Lacus radar anomaly and the proposed interpretation in terms of the near-surface presence of liquid water created a controversy in the planetary science community. Over the past year, skepticism was voiced about the reality of the phenomenon of a seasonally variable radar reflectivity anywhere on Mars. The necessary background information and the pertinent data are reviewed in a format perhaps more convincing than that employed in the original presentation of the discovery. A summary of the results and recommendations for future work are included.

Roth, L. E.↗

Mars: Seasonally variable radar reflectivity

The 1971/1973 Mars data set acquired by the Goldstone Solar System Radar was analyzed. It was established that the seasonal variations in radar reflectivity thought to occur in only one locality on the planet (the Solis Lacus radar anomaly) occur, in fact, over the entire subequatorial belt observed by the Goldstone radar. Since liquid water appears to be the most likely cause of the reflectivity excursions, a permanent, year-round presence of subsurface water (frozen or thawed) in the Martian tropics can be inferred.

Roth, L. E.↗

Questions for the geologic exploration of Venus

Venus is the last terrestrial planet to be mapped in the Solar System. This is an indication not of its relative importance for comparative planetary studies but of the previous lack of demonstrated, affordable technology. Venus is, in fact, the most important planet to study for improving our understanding of global terrestrial processes such as plate tectonics. The next NASA mission to Venus, in 1988, will map the planet at a resolution comparable to that of the Mars Mariner 9 mission. The objective is 70 percent coverage at 1 km per line pair or better. This is the minimum resolution that will allow analysis of tectonic, volcanic, aeolian, meteorite impact and other features. An altimeter will provide a global map of topography that will considerably improve our data base and, together with gravity field measurements, provide better interior geophysical models.

Saunders, R. S.↗

The source of Mangalla Vales

Through the use of high resolution Viking topographic data, a hypothesis for the formation of Mangalla Vales is presented. Subsurface water flow and concurrent lava flow are used to explain the theory of a catastrophic flood that created the network of channels. A thorough description of the terrain is included.

Pfau, C. E.↗

A possible source for the Martian circumpolar dune material

The properties of freeze dried dilute dispersions of dust in water are of considerable interest in studies of sedimentary processes in the polar regions of Mars. The formation of a rind residue due to the sublimation of water ice containing various amounts of clay may be an important step in these processes. Such phenomena may occur as the result of seasonal or long term (climatic) sublimation of dirty ice caps on Mars. The development and disruption of dust residues on the surface of ice dust mixtures as a result of preferential ice sublimation were simulated in the laboratory. The characteristics of the resulting particles are described and a scenario for the formation of a Martian circumpolar dune field is suggested.

Saunders, R. S.↗

Shuttle imaging radar experiment

The Shuttle imaging radar (SIR-A) acquired images of a variety of the earth's geologic areas covering about 10 million square kilometers. Structural and geomorphic features such as faults, folds, outcrops, and dunes are clearly visible in both tropical and arid regions. The combination of SIR-A and Seasat images provides additional information about the surface physical properties: topography and roughness. Ocean features were also observed, including large internal waves in the Andaman Sea.

Elachi, C.↗

Thick shell tectonics on one-plate planets - Applications to Mars

Using the zero frequency equations of a self-gravitating elastic spherical shell overlying a strengthless fluid, a theory for stress distribution in thick lithospheric shells on one-plate planets is developed. For both the compensated and flexural modes, stress distributions in lithospheres are reviewed. For compensated modes, surface stresses depend only on surface topography, whereas for flexural modes it is shown that, for long wavelengths, stress trajectories are mainly dependent on the lithospheric lateral density distribution and not on elastic properties. Computational analyses are performed for Mars, and it is found that isostatically compensated models correctly predict the graben structure in the immediate Tharsis region and a flexural loading model is satisfactory in explaining the graben in the regions surrounding Tharsis. A three-stage model for the evolution of Tharsis is hypothesized: isostasy with north-south graben formation on Tharsis, followed by flexural loading and radial graben formation on the perimeter of Tharsis, followed by a last stage of loading with little or no regional deformation.

Banerdt, W. B.↗