Engineering topics

Sastry, Shankar

Publications and source records attributed to Sastry, Shankar.

9 records

NASA NTRS1992

Nonlinear control design for slightly nonminimum phase systems - Application to V/STOL aircraft

The paper describes the application of techniques of exact I/O linearization of nonlinear control systems to the flight control of V/STOL aircraft. It is seen that the application of the theory to this example is not straightforward; in particular, the direct application of the theory yielded an undesirable controller. The situation was remedied by neglecting the coupling between the rolling moment input to the aircraft dynamics and the dynamics along the y-axis. An approximate I/O linearization procedure developed for slightly nonminimum phase nonlinear systems is shown to be effective for V/STOL aircraft.

Hauser, John↗

NASA NTRS1992

Nonlinear control via approximate input-output linearization - The ball and beam example

A study is made of approximate input-output linearization of nonlinear systems which fail to have a well defined relative degree. For such systems, a method is provided for constructing approximate systems that are input-output linearizable. The analysis presented in this note is motivated through its application to a common undergraduate control laboratory experiment, the ball and beam system, where it is shown to be more effective for trajectory tracking than the standard Jacobian linearization.

Hauser, John↗

NASA NTRS1991

Indirect techniques for adaptive input-output linearization of non-linear systems

A technique of indirect adaptive control based on certainty equivalence for input output linearization of nonlinear systems is proven convergent. It does not suffer from the overparameterization drawbacks of the direct adaptive control techniques on the same plant. This paper also contains a semiindirect adaptive controller which has several attractive features of both the direct and indirect schemes.

Teel, Andrew↗

NASA NTRS1989

Adaptive control: Stability, convergence, and robustness

The deterministic theory of adaptive control (AC) is presented in an introduction for graduate students and practicing engineers. Chapters are devoted to basic AC approaches, notation and fundamental theorems, the identification problem, model-reference AC, parameter convergence using averaging techniques, and AC robustness. Consideration is given to the use of prior information, the global stability of indirect AC schemes, multivariable AC, linearizing AC for a class of nonlinear systems, AC of linearizable minimum-phase systems, and MIMO systems decouplable by static state feedback.

Sastry, Shankar↗

NASA NTRS1989

On the design of nonlinear controllers for flight control systems

A method of approximate input-output linearization by dynamic state feedback is presented, with the flight control of VTOL aircraft used as an example. It is shown that the closed loop system has a graceful degradation of performance as the moment-to-force coupling is increased. It is also demonstrated that the approach proposed here leads to an asymptotically stable closed loop system with guaranteed bounds on the tracking error caused by the nonminumum phase character of the system.

Hauser, John↗

NASA NTRS1989

Nonlinear control via approximate input-output linearization - The ball and beam example

This paper presents an approach for the approximate input-output linearization of nonlinear systems, particularly those for which relative degree is not well defined. It is shown that there is a great deal of freedom in the selection of an approximation and that, by designing a tracking controller based on the approximating system, tracking of reasonable trajectories can be achieved with small error. The approximating system is itself a nonlinear system, with the difference that it is input-output linearizable by state feedback. Some properties of the accuracy of the approximation are demonstrated and, in the context of the ball and beam example, it is shown to be far superior to the Jacobian approximation. The results are focused on finding regular SISO systems which are close to systems which are not regular and controlling these approximate regular systems.

Hauser, John↗

NASA NTRS1987

Input error versus output error model reference adaptive control

Algorithms for model reference adaptive control were developed in recent years, and their stability and convergence properties have been investigated. Typical algorithms in continuous time involve strictly positive real conditions on the reference model, while similar discrete time algorithms do not require such conditions. It is shown how algorithms differ by the use of an input error versus an output error, and present a continuous time input error adaptive control algorithm which does not involve SPR conditions. The connections with other schemes are discussed. The input error scheme has general stability and ocnvergence properties that are similar to the output error scheme. However, analysis using averaging methods reveals some preferable convergence properties of the input error scheme. Several other advantages are also discussed.

Bodson, Marc↗

NASA NTRS1987

Frequency domain synthesis of optimal inputs for adaptive identification and control

The input design problem of selecting appropriate inputs for use in SISO adaptive identification and model reference adaptive control algorithms is considered. Averaging theory is used to characterize the optimal inputs in the frequency domain. The design problem is formulated as an optimization problem which maximizes the smallest eigenvalue of the average information matrix over power constrained signals, and the global optimal solution is obtained using a convergent numerical algorithm. A bound on the frequency search range required in the design algorithm has been determined in terms of the desired performance.

Fu, Li-Chen↗

NASA NTRS1987

Adaptive identification and control for manipulators without using joint accelerations

The authors present a new scheme for the adaptive control of mechanical manipulators along with proof of convergence. Difficulties encountered in the input-error type adaptive controller are remedied by combining an explicit identifier with discrete time updates of the parameter values along with a computed torque type control law. The new scheme requires no matrix inversion with its consequent drain on the computational power of the controller. A discussion is presented of the dynamic model of a manipulator, a computed torque adaptive scheme, an input error identifier, and a hybrid identifier.

Hsu, Ping↗