All-Dielectric Intersubband Polaritonic Metasurface with Giant Second-Order Nonlinear Response.
Abstract not provided.
Engineering topics
Publications and source records attributed to Sarma, Raktim.
Abstract not provided.
The deeply depleted graphene-oxide-semiconductor (D 2 GOS) junction detector provides an effective architecture for photodetection, enabling direct readout of photogenerated charge. Because of an inherent gain mechanism proportional to graphene’s high mobility (μ), this detector architecture exhibits large responsivities and signal-to-noise ratios (SNR). The ultimate sensitivity of the D2GOS junction detector may be limited, however, because of the generation of dark charge originating from interface states at the semiconductor/dielectric junction. Here, we examine the performance limitations caused by dark charge and demonstrate its mitigation via the creation of low interface defect junctions enabled by surface passivation. The resulting devices exhibit responsivities exceeding 10 000 A/W—a value which is 10× greater than that of analogous devices without the passivating thermal oxide. Finally, with cooling of the detector, the responsivity further increases to over 25 000 A/W, underscoring the impact of surface generation on performance and thus the necessity of minimizing interfacial defects for this class of photodetector.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
A prominent nonlinear optical phenomenon that is extensively studied using nanostructured materials is second-harmonic generation (SHG) as it has applications in various fields. Achieving efficient SHG from a nanostructure requires a large second-order nonlinear susceptibility of the material system and large electromagnetic fields. For practical applications, the nanostructures should also have low losses, high damage thresholds, large bandwidths, wavelength scalability, dual mode operation in transmission and reflection, monolithic integrability, and ease of fabrication. While various approaches have demonstrated efficient SHG, to the best of our knowledge, none have demonstrated all these desired qualities simultaneously. Here, we introduce a hybrid approach for realizing efficient SHG in an ultrathin dielectric-semiconductor nonlinear device with all the above-mentioned desired properties. Our method uses high quality factor leaky mode resonances in dielectric metasurfaces that are coupled to intersubband transitions of semiconductor quantum wells. Using our device, we demonstrate SHG at pump wavelengths ranging from 8.5 to 11 μm, with a maximum second-harmonic nonlinear conversion factor of 1.1 mW/W 2 and maximum second-harmonic conversion efficiency of 2.5 × 10 –5 at modest pump intensities of 10 kW/cm 2 . Our conclusions open a new direction for designing low loss, broadband, and efficient ultrathin nonlinear optical devices.
Abstract not provided.
Abstract not provided.
We present that the ability to control the light-matter interaction with an external stimulus is a very active area of research since it creates exciting new opportunities for designing optoelectronic devices. Recently, plasmonic metasurfaces have proven to be suitable candidates for achieving a strong light-matter interaction with various types of optical transitions, including intersubband transitions (ISTs) in semiconductor quantum wells (QWs). For voltage modulation of the light-matter interaction, plasmonic metasurfaces coupled to ISTs offer unique advantages since the parameters determining the strength of the interaction can be independently engineered. In this work, we report a proof-of-concept demonstration of a new approach to voltage-tune the coupling between ISTs in QWs and a plasmonic metasurface. In contrast to previous approaches, the IST strength is here modified via control of the electron populations in QWs located in the near field of the metasurface. By turning on and off the ISTs in the semiconductor QWs, we observe a modulation of the optical response of the IST coupled metasurface due to modulation of the coupled light-matter states. Because of the electrostatic design, our device exhibits an extremely low leakage current of ~6 pA at a maximum operating bias of +1 V and therefore very low power dissipation. Finally, our approach provides a new direction for designing voltage-tunable metasurface-based optical modulators.
Abstract not provided.
Considering the power constrained scaling of silicon complementary metal-oxide-semiconductor technology, the use of high mobility III–V compound semiconductors such as In 0.53 Ga 0.47 As in conjunction with high-κ dielectrics is becoming a promising option for future n-type metal-oxide-semiconductor field-effect-transistors. Development of low dissipation field-effect tunable III–V based photonic devices integrated with high-κ dielectrics is therefore very appealing from a technological perspective. In this work, we present an experimental realization of a monolithically integrable, field-effect-tunable, III–V hybrid metasurface operating at long-wave-infrared spectral bands. Here, our device relies on strong light-matter coupling between epsilon-near-zero (ENZ) modes of an ultra-thin In 0.53 Ga 0.47 As layer and the dipole resonances of a complementary plasmonic metasurface.