Engineering Papers⌕ Search

Engineering topics

Santosa, Daniel M.

Publications and source records attributed to Santosa, Daniel M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A simultaneous depolymerization and hydrodeoxygenation process to produce lignin-based jet fuel in continuous flow reactor

Economical production of lignin-based jet fuel (LJF) can improve the sustainability of sustainable aviation fuels (SAFs) as well as can reduce the overall greenhouse gas emissions. However, the challenge lies in converting technical lignin polymer from biorefinery directly to jet fuel in a continuous operation. In this work, we demonstrate a simultaneous depolymerization and hydrodeoxygenation (SDHDO) process to produce lignin-based jet fuel from the alkali corn stover lignin (ACSL) using engineered Ru-HY-60-MI catalyst in a continuous flow reactor at first time. The maximum carbon yield of LJF of 17.9wt% was obtained, and it comprised of 60.2wt% monocycloalkanes, and 21.6wt% polycycloalkanes. Catalyst characterization of Ru-HY-60-MI suggested there was no significant change in HY zeolite structure and its crystallinity after catalyst engineering. Catalyst characterizations performed post the SDHDO experiments indicate presence of carbon and K content in the catalyst. K content presence in the spent catalyst was due to K + ion was exchanged between lignin solution and HY-60 while carbon presence validated the SDHDO chemistry on the catalyst surface. Tier a fuel property testing indicates that LJF production using SDHDO chemistry can offer SAF with high compatibility, good sealing properties, low emissions, and high energy density for aircraft.

09 BIOMASS FUELS↗
DOE OSTI2024

Engineered $\mathrm{Ru}$ on $\mathrm{HY}$ zeolite catalyst for continuous and selective hydrodeoxygenation of lignin phenolics to cycloalkanes under moderate conditions

Here we report a continuous selective hydrodeoxygenation (HDO) process of guaiacol conversion to cycloalkanes under 180 °C/1 MPa, which results in improved HDO chemistry for lignin-based jet fuel production. The incipient wetness impregnation method was modified to prepare an HY zeolite-supported Ru catalyst with better metal dispersion and acid site uniformity, which overcomes the low conversion and selectivity of previous literature. The modified catalyst (Ru-HY-60-MI) was tested in a continuous fixed bed reactor, resulting in increased HDO conversion of guaiacol to cycloalkanes compared to the unmodified catalyst. Pressure, temperature, and weight hourly space velocity-dependent tests validate guaiacol HDO over Ru-HY-60-MI catalyzed ring hydrogenation of guaiacol to 2-methoxycyclohexanol, acid-catalyzed demethoxylation and dehydration to cyclohexene, and further hydrogenation of cyclohexene to cyclohexane. These experiments enable exploring a continuous HDO process, demonstrate effectiveness for other ß-ß and a-O-4 lignin representatives and real lignin bio-oil, and pave the way towards commercialization of lignin-based jet fuel

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Aqueous-phase product treatment and monetization options of wet waste hydrothermal liquefaction: Comprehensive techno-economic and life-cycle GHG emission assessment unveiling research opportunities

While wet waste hydrothermal liquefaction technology has a high biofuel yield, a significant amount of the carbon and nitrogen in the feedstock reports to the aqueous-phase product. Pretreatment of this stream before sending to a conventional wastewater plant is essential or at the very least, advisable. In this work, techno-economic and life-cycle assessments were conducted for the state-of-technology baseline and four aqueous-phase product treatment and monetization options based on experimental data. Further, these options can cut minimum fuel selling prices by up to 13 % and life-cycle greenhouse gas emissions by up to 39 % compared to the baseline. These findings highlight the substantial influence of aqueous produce treatment strategies on the entire wet waste hydrothermal liquefaction process, demonstrating the potential for optimizing economic viability and environmental impact through further research and development of milder treatment methods and diversified by-product valorization pathways.

09 BIOMASS FUELS↗
DOE OSTI2023

Desalting biocrude for improved downstream processing toward marine fuel application

Hydrothermal liquefaction of wet wastes (e.g., food waste and sewage sludge) offers a promising avenue for producing biocrude, but the resulting product is often contaminated with metals and water, impacting the biocrude upgrading steps to produce final fuel (e.g., jet and diesel). Here this study investigates the use of aqueous solutions of formic acid for desalting biocrudes and improving their quality. The results show that this approach significantly reduces both metal and water content, enabling mild hydrotreatment with reduced hydrogen consumption to further enhance the biocrude's quality. A preliminary technoeconomic analysis based on these experimental results shows that even without optimization, this washing process can yield biocrude with a minimum selling price of $1.87/GGE. Overall, our study demonstrates the potential for using dilute formic acid aqueous solutions to improve the quality of biocrudes, which can lead to more efficient and cost-effective conversion into biofuels.

09 BIOMASS FUELS↗
DOE OSTI2023

Microalgae Hydrothermal Liquefaction and Biocrude Upgrading: 2022 State of Technology

A preliminary techno-economic analysis (TEA) was developed for the fiscal year (FY) 2022 state of technology (SOT) assessment to evaluate the benefits and risks of using demonstrated, high-productivity algae strains for fuels generation, including sustainable aviation fuel (SAF). In 2022, the marine algal strain, Picochlorum celeri, which demonstrated the highest outdoor biomass productivities reported to date in the DOE-funded open-pond raceway testbed at the Arizona Center for Algae Technology and Innovation (AzCATI), was tested for continuous hydrothermal liquefaction (HTL) processing at PNNL. HTL testing results demonstrated a biocrude yield of 0.33 g/g algae on an ash-free dry weight (AFDW) basis from P. celeri. The hydrotreatment testing of the HTL biocrude from P. celeri was also conducted to investigate the production of jet fuel from marine algal biomass. To the best of our knowledge, this is the first report of jet fuel production from autotrophically grown marine algal biomass. The current hydrotreating testing demonstrated approximately 22.7 wt% of the hydrotreated oil within the typical boiling-point range of jet fuel (150–250 °C). Initial testing of the jet fuel cut (JFC) showed that the physical properties under investigation were within typical ranges for petroleum-based jet fuels. The experimental work of this study closes the gap between outdoor algae cultivation and algae conversion to critical transportation fuels using the same algae strain for both cultivation and conversion testing. The continuous HTL and the upgrading testing described herein demonstrate the potential of producing sustainable aviation fuel (SAF) from algae cultivated in open-pond systems using the primary inputs of sunlight and carbon dioxide.

09 BIOMASS FUELS↗
DOE OSTI2022

Coprocessing Biomass Fast Pyrolysis and Catalytic Fast Pyrolysis Oils with Vacuum Gas Oil in Refinery Hydroprocessing

Fast pyrolysis and catalytic fast pyrolysis (CFP) have been considered to be promising approaches for converting lignocellulosic biomass into liquid bio-oils followed by upgrading to produce fuel-range hydrocarbon products. Co-processing fast pyrolysis and CFP bio-oils with petroleum feedstocks leverages the existing petroleum refining infrastructure, which reduces Capex for the overall conversion technologies for biomass to fuel and enables fast adoption of the technologies and biofuels. Here, we reported the co-processing of different woody fast pyrolysis and CFP bio-oils with petroleum vacuum gas oil (VGO) at 5-25% bio-oil blending levels over a NiMo sulfide catalyst for mild hydrocracking. The catalyst activities over ~300 hours time on stream, the product yield and properties, and the biogenic carbon content in products are provided. Co-processing of the raw fast pyrolysis bio-oil in our configuration was not successful because the instability of the bio-oil resulted in reactor plugging and bio-oil stabilization by hydrogenation enabled their stable co-processing with VGO, whereas the CFP bio-oil can be co-processed without pretreatment. Simultaneous hydrodesulfurization, hydrodeoxygenation, and hydrocracking reactions occurred during co-processing and no obvious decrease in hydrodesulfurization and hydrocracking conversion of VGO was observed, suggesting the minimal impact of co-processed bio-oils on the reaction of VGO and also the simultaneous conversion of bio-oil and VGO to produce fuel products with much-reduced S and O content. Biogenic carbon content in co-processed products calculated by yield mass balance, together with results from isotopic measurements, indicates high biogenic carbon incorporation into liquid hydrocarbon products. In conclusion, higher biogenic carbon incorporation into fuel products was observed when co-processing CFP bio-oils than the fast pyrolysis bio-oils and over 90% of carbon in CFP bio-oil was incorporated into liquid hydrocarbon products.

09 BIOMASS FUELS↗
DOE OSTI2022

Model quantification of the effect of coproducts and refinery co-hydrotreating on the economics and greenhouse gas emissions of a conceptual biomass catalytic fast pyrolysis process

Here we present model results for a scaled-up conceptual process informed by bench scale biomass catalytic fast pyrolysis (CFP) and hydrotreating experimental data. This process uses a Pt/TiO 2 catalyst during CFP, which produces a partially deoxygenated organic biocrude intermediate that is then hydroprocessed to a hydrocarbon fuel blendstock; the catalyst also enables high yields of acetone and methyl-ethyl-ketone (MEK) coproducts. Two options for hydroprocessing were modeled: (A) co-hydrotreating at a petroleum refinery using hydrogen sourced from steam reforming of natural gas and (B) standalone hydrotreating at a biorefinery using hydrogen sourced from CFP off gases. The results revealed that Case A was economically advantageous with a modeled minimum fuel selling price (MFSP) of $\$$2.83/GGE or gallon gasoline equivalent (in 2016 US dollars), while the additional cost of standalone hydrotreating facilities in Case B increased the MFSP to $3.13/GGE. Conversely, greenhouse gas (GHG) emissions were lower for Case B (3.9 g CO 2 e/MJ) compared to Case A (21.5 g CO 2 e/MJ) due to the use of biogenic (Case B) and fossil-derived (Case A) hydrogen. In a third option (Case C), the requirements for separation and purification of acetone and MEK were removed from the refinery co-processing scenario (Case A) to evaluate the impacts of this process simplification. Elimination of these coproducts increased the MFSP to $3.21/GGE and GHG emissions to 35 g CO 2 e/MJ. These comparisons based on our detailed conceptual models provide economic and sustainability guidance regarding processing choices for future biorefineries. While refinery coprocessing using existing equipment and the production of relatively valuable coproducts can benefit the economics, the hydrogen-source and biogenic coproducts can have significant impacts on the sustainability of the process, and feasibility to use CFP off-gases or other renewable sources for hydrogen production can help lower GHG emissions.

09 BIOMASS FUELS↗
DOE OSTI2022

Impact of storage and blending of algae and forest product residue on fuel blendstock production

Seasonal impacts on the production of algae biomass require blending with other feedstocks such as wood to maintain consistent annual conversion capacity. Idaho National Laboratory (INL) has developed a long-term storage strategy for algae biomass using ensiling, or anaerobic wet storage, that was tested for blends of algae and wood to stabilize the feedstock supply for processing to fuels. Additionally, blending biomass (algae and wood) leverages existing biomass storage approaches commonly used by the feed and forage industry. Earlier research also has demonstrated positive results that indicate ensiling is more effective and economical in normalizing biomass feedstock supply prior to conversions such as HTL (hydrothermal liquefaction) than preserving biomass by drying. By assessing impacts beginning with upstream logistic operations and proceeding through each conversion step, this work focuses on conversion of ensiled and blended biomass to fungible liquid transportation fuel blendstocks. This is accomplished by conversion of the blended biomass (62% Chlorella sp. blended with 38% loblolly pine forest product residues [FPR]) to bio-crude through HTL and subsequent upgrading through HT (hydrotreating) with a commercial refinery catalyst analogous to a refinery process to produce hydrocarbon fuel. In this work, results indicate that carbon retention and quality are preserved in both the bio-crude and upgraded fuel from the ensiled blend, indicating the potential of this approach for managing seasonal variations in algae biomass productivity.

09 BIOMASS FUELS↗
DOE OSTI2021

The Influence of Transitional Metal Dopants on Reducing Chlorine Evolution during the Electrolysis of Raw Seawater

Electrocatalytic water splitting is a possible route to the expanded generation of green hydrogen; however, a long-term challenge is the requirement of fresh water as an electrolyzer feed. The use of seawater as a direct feed for electrolytic hydrogen production would alleviate fresh water needs and potentially open an avenue for locally generated hydrogen from marine hydrokinetic or off-shore power sources. One environmental limitation to seawater electrolysis is the generation of chlorine as a competitive anodic reaction. This work evaluates transition metal (W, Co, Fe, Sn, and Ru) doping of Mn-Mo-based catalysts as a strategy to suppress chlorine evolution while sustaining catalytic efficiency. Electrochemical evaluations in neutral chloride solution and raw seawater showed the promise of a novel Mn-Mo-Ru electrode system for oxygen evolution efficiency and enhanced catalytic activity. Subsequent stability testing in a flowing raw seawater flume highlighted the need for improved catalyst stability for long-term applications of Mn-Mo-Ru catalysts. This work highlights that elements known to be selective toward chlorine evolution in simple oxide form (e.g., RuO2) may display different trends in selectivity when used as isolated dopants, where Ru suppressed chlorine evolution in Mn-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Extended catalyst lifetime testing for HTL biocrude hydrotreating to produce fuel blendstocks from wet wastes

This paper presents the upgrading of HTL (Hydrothermal Liquefaction) bio oil produced by from various sources such as sewage sludge and food wastes. The HTL oil was hydrotreated over a CoMo/Al2O3 (guardbed) and NiMo/Al2O3 (mainbed) catalysts at WHSV 0.5hr-1, 400°C and 1500 psi. The steady state densities (at 40°C) were 0.79 and 0.81 g/ml for HTL biocrude derived from sewage sludge and food waste, respectively. After 1500 hours of steady state operation, variations in process conditions that affect the hydrotreating performance had been identified in the following order; Pressure>WHSV>Temperature. Pressure had huge impact on the hydrotreating performance. The hydrotreating efficiency was reestablished to base line conditions with minimal deactivation of catalyst at 2000 hours run time.

Hydrothermal Liquefaction, HTL, Hydrotreating, Bio↗
DOE OSTI2021

SCALEABLE HYDROTREATING OF HTL BIOCRUDE TO PRODUCE FUEL BLENDSTOCKS

Hydrothermal liquefaction (HTL) offers an attractive route to produce fuel blendstocks from wet wastes. Scaleable hydrotreating data for the conversion of HTL biocrude to fuels is critical to the commercialization of HTL. Herein, we demonstrate pore diffusion limitations for the hydrotreating of HTL biocrudes. We demonstrate scale-able hydrotreating of HTL biocrude to produce a high cetane diesel fuel and demonstrate the hydrotreating limitations.

Biofuel, hydrotreating, HTL biocrude, hydrothermal↗
DOE OSTI2021

The Storage of Marine Hydrokinetic Power through Hydrogen Production

Marine hydrokinetic (MHK) power is likely to play a crucial role in future energy diversification and remote energy supply efforts. Providing a means of direct energy storage for MHK power would provide additional benefits to applications in ship microgrids and remote communities. Hydrogen (H 2 ) has long been pursued as a means of green energy storage and can be generated through electrolysis of water in an electrolyzer. However, electrolyzer technology for H 2 production is currently only possible on the commercial scale using fresh water, also a precious resource in our society. The direct electrolysis of seawater would alleviate the fresh water constraints for a new H 2 feedstock and a seawater-fed electrolyzer could be powered locally at a MHK platform. Several technical challenges exist before efficient direct seawater electrolysis can be realized. This project was designed as a demonstration of efficient direct seawater electrolysis that limits chlorine evolution, avoids use of platinum (Pt) group metals and overcomes cathode fouling over long service times.

08 HYDROGEN↗
DOE OSTI2021

Wet Waste Hydrothermal Liquefaction and Biocrude Upgrading to Hydrocarbon Fuels: 2020 State of Technology

Data from Pacific Northwest National Laboratory’s conversion hydrothermal liquefaction (HTL) program for wet waste was used to update the pathway techno-economic analysis (TEA) for the fiscal year 2020 State of Technology (2020 SOT). The modeled fuel blendstock MFSP for the 2020 SOT is estimated at $4.50/GGE (with ammonia stripping of the AP), a reduction of $0.61/GGE, or 12%, relative to the 2019 SOT (Snowden-Swan et al. 2020). Progress in the HTL area includes increased reactor LHSV from 3.6 to 4.0 and a newly designed staged approach for the sludge pumping and heating, resulting in a 1 cent and 26 cent reduction in modeled MFSP, respectively. The newly designed heat exchanger configuration is less material and capital intensive than the previous SOT, and provides a system design that is more scalable with regard to practical fabrication limitations. Further improvements may be possible with the use of core inserts to enhance tube velocity and heat transfer rates. Biocrude hydrotreating research progress improved weight hourly space velocity (WHSV) from 0.67 to 0.72 hr-1 in the guard bed and from 0.39 to 1.02 hr-1 in the main hydrotreating bed, a 7% and 162% improvement, respectively. Hydrotreating performance was not sacrificed at the higher throughput rates and catalyst activity remained stable over the run. The demonstrated increase in WHSVs reduced the modeled MFSP by $0.34/GGE.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Algae/Wood Blends Hydrothermal Liquefaction and Upgrading: 2019 State of Technology

The fiscal year (FY) 2019 State of Technology (SOT) Assessment for a microalgae and woody biomass blend feedstock hydrothermal liquefaction (HTL) and biocrude upgrading system has been completed and reported here. This study is a preliminary economic analysis for this system. Inputs from the 2019 NREL open pond algae cultivation model provided microalgae seasonal flowrates and dewatered algae feedstock price. These inputs have been coupled with modeled experimental data from PNNL for algae/wood blends processed via HTL to assess the cost impacts. The TEA results demonstrated a 28% reduction in the conversion cost only from $1.22/gge in 2018 to $0.88/gge in 2019.

09 BIOMASS FUELS↗