Engineering Papers⌕ Search

Engineering topics

Sammuli, Brian

Publications and source records attributed to Sammuli, Brian.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Uncertainty based Online Ensemble on Non-Stationary Data for Fusion Science

Machine Learning (ML) is poised to play a pivotal role in the development and operation of next-generation fusion devices. Fusion data shows non-stationary behavior due to drifts in the data. The drifts can arise from both experimental evolution and machine wear-and-tear. ML models assume stationary distribution and fail to maintain performance when encountered with non-stationary data streams.Online learning can be used to continuously adapt the models with new data as it is acquired. However, traditional online learning can suffer from short-term performance degradation, as ground truth are not available before making the prediction. To address this challenge, we propose uncertainty aware ensemble approach for online learning. We use Deep Gaussian Process Approximation (DGPA) technique for calibrated uncertainty estimation and use the uncertainty values to guide a meta-algorithm that produces predictions based on ensemble of learners. Moreover, DGPA also provides uncertainty estimation along with the predictions for decision makers. This paper demonstrates that the proposed method outperforms traditional online learning approach, and a naive ensemble without uncertainty guidance by about 7% and 6%, respectively, on B-coil deflection prediction at DIII-D Fusion Facility.

Rajput, Kishansingh [Thomas Jefferson National Acc↗
DOE OSTI2025

Uncertainty based Online Ensemble on Non-Stationary Data for Fusion Science

Machine Learning (ML) is poised to play a pivotal role in the development and operation of next-generation fusion devices. Fusion data shows non-stationary behavior due to drifts in the data. The drifts can arise from both experimental evolution and machine wear-and-tear. ML models assume stationary distribution and fail to maintain performance when encountered with non-stationary data streams.Online learning can be used to continuously adapt the models with new data as it is acquired. However, traditional online learning can suffer from short-term performance degradation, as ground truth are not available before making the prediction. To address this challenge, we propose uncertainty aware ensemble approach for online learning. We use Deep Gaussian Process Approximation (DGPA) technique for calibrated uncertainty estimation and use the uncertainty values to guide a meta-algorithm that produces predictions based on ensemble of learners. Moreover, DGPA also provides uncertainty estimation along with the predictions for decision makers. This paper demonstrates that the proposed method outperforms traditional online learning approach, and a naive ensemble without uncertainty guidance by about 7% and 6%, respectively, on B-coil deflection prediction at DIII-D Fusion Facility.

Rajput, Kishansingh [Thomas Jefferson National Acc↗
DOE OSTI2022

Development and experimental qualification of novel disruption prevention techniques on DIII-D

Novel disruption prevention solutions spanning a range of control regimes are being developed and tested on DIII-D to enable ITER success. First, a new real-time control algorithm has been developed and tested for regulating nearness to stability limits and maintaining safety-margins. Its first application has been for reliable prevention of vertical displacement events (VDEs) by adjusting plasma elongation (κ) and the inner-gap between the plasma and inner-wall in response to real- time open-loop VDE growth rate (γ) estimators. VDEs were robustly prevented up to average open-loop growth rates of 800 rad/s with initial tunings, with only applying shape modification when near safety limits. Second, the disruption risk during fast, emergency shutdown after large tearing and locked modes can be significantly improved by transitioning to a limited topology during shutdown. More than 50% of emergency limited shutdowns after locked modes reach a final normalized current I N < 0.3 before terminating, scaling to the 3 MA ITER requirement. This is in contrast to diverted shutdowns, the majority of which disrupt at I N > 0.8. Despite improvements, these results highlight the critical importance of early prevention. Third, a novel emergency shut down method has been developed which excites instabilities to form a warm, helical core post-thermal quench. The current quench extends to ~100ms and avoids VDEs and runaway electron generation. Novel real-time machine learning disruption prediction has been integrated with the DIII-D proximity controller, and a real- time compatible multi-mode MHD spectroscopy technique has been developed. Results presented here were enabled by a focused effort, the Disruption Free Protocol, in DIII-D’s 2019-20 campaign to complement disruption prevention experiments with a large piggy-back program. In addition to testing novel techniques, it is estimated to have helped avoid 32 potential disruptions in piggyback operations with rapid, early shutdowns after large rotating n=1 or locked modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Closed-loop simulation with Grad-Shafranov equilibrium evolution for plasma control system development

Plasma control design increasingly depends on fast simulations able to connect to operational plasma control system (PCS) software for iterative development. GSevolve is a nonlinear free-boundary simulation that evolves the Grad-Shafranov equilibrium including current and pressure profiles, and can connect to all versions of the DIII-D PCS operational on devices around the world. Its ability to simulate the evolution of current continuously from open to closed field lines enables GSevolve to simulate full-discharge control from breakdown through plasma termination. GSevolve is compliant with the Plasma Control System Simulation Platform (PCSSP), a Matlab/Simulink®-based environment that serves as the primary framework for development of the ITER Plasma Control System (PCS). The code employs a novel response function-updating scheme to achieve fast simulations. The plasma evolves linearly until a significant shape change triggers a nonlinear update of the response while enforcing a prescribed accuracy. Old responses are recalled if the plasma changes back to an old shape. The equilibrium is a function of a state vector containing axisymmetric conductor currents and parameters related to parallel and perpendicular currents, which evolves according to an efficient state space circuit formulation. Control design and validation results are presented for simulations of DIII-D and EAST, connected to their corresponding versions of the DIII-D PCS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Magpie

Magpie contains a number of scripts for running Big Data software in HPC environments, including Hadoop and Spark. There is support for Lustre, Slurm, Moab, Torque. and LSF.

Chu, Al↗