Engineering topics
Publications and source records attributed to Salyer, I. O..
New polyimide intumescent coating uses titanium dioxide and glass microballons as nucleating agents to improve foaming characteristics of commercially-available polyimide precursor resin. Used for coating interior surfaces in commercial aircraft.
The electron irradiation conditions required to prepare thermally from stable high density polyethylene (HDPE) were defined. The conditions were defined by evaluating the heat of fusion and the melting temperature of several HDPE specimens. The performance tests conducted on the specimens, including the thermal cycling tests in the thermal energy storage unit are described. The electron beam irradiation tests performed on the specimens, in which the total radiation dose received by the pellets, the electron beam current, the accelerating potential, and the atmospheres were varied, are discussed.
Plastic foams based on polyimide resins were shown to be stable at relatively high temperatures, and to possess very low flame spread and smoke generation characteristics. A system and process were developed to prepare low-density polyimide foam from a liquid formulation. The system is based on the reaction of micropulverized grade pyromellitic dianhydride with a polymeric diisocyanate. The panels produced were postcured at elevated temperatures to achieve maximum thermal and fire resistance, and incorporation of a fire retardant into the formulation was considered. The effects of a flame retardant (Flameout 5600B1) were investigated, but eliminated in preference to the postcuring approach.
Polyimide foams developed by Monsanto Company were examined for use as upper surface space shuttle thermal insulation. It was found that postcured polyimide foams having a density of 64 kg/cu m (4 lb/cu ft) had acceptable physical properties up to and exceeding 700 K (800 F). Physical tests included cyclic heating and cooling in vacuum, weight and dimensional stability, mechanical strength and impact resistance, acoustic loading and thermal conductivity. Molding and newly developed postcuring procedures were defined.
Explore the source record for details and available documents.
Ethylene/acrylic acid separators for silver zinc battery applications
Silver zinc battery separator material development and production
Ethylene/methyl acrylate copolymer synthesis for silver-zinc battery separators
Foam system compressive strength analysis, solid urethane castings to screen polymer systems, and prepolymer methods of foam preparation in plastic foam development for Saturn project