Engineering Papers⌕ Search

Engineering topics

Saleeb, A. F.

Publications and source records attributed to Saleeb, A. F..

27 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Finite element implementation of state variable-based viscoplasticity models

The implementation of state variable-based viscoplasticity models is made in a general purpose finite element code for structural applications of metals deformed at elevated temperatures. Two constitutive models, Walker's and Robinson's models, are studied in conjunction with two implicit integration methods: the trapezoidal rule with Newton-Raphson iterations and an asymptotic integration algorithm. A comparison is made between the two integration methods, and the latter method appears to be computationally more appealing in terms of numerical accuracy and CPU time. However, in order to make the asymptotic algorithm robust, it is necessary to include a self adaptive scheme with subincremental step control and error checking of the Jacobian matrix at the integration points. Three examples are given to illustrate the numerical aspects of the integration methods tested.

Iskovitz, I.↗
NASA NTRS1990

A mixed element for laminated plates and shells

Formulation and numerical evaluation of a simple shear-flexible four-noded quadrilateral laminated composite plate/shell finite-element is presented. The element developed is based on a generalized mixed variational principle with independently assumed displacement and laminate internal strain fields. For the latter, a layer-number-independent polynomial interpolation is utilized, together with a judicious selection of the in-plane (spanwise) distributions for the strain components. This was facilitated by the use of a set of bubble functions as additional kinematic degrees of freedom, which was shown to be crucial for eliminating the locking phenomenon. For dynamic applications, a simplified lumped mass matrix is employed. Finally, an extensive number of critical test cases are given to access the element's preformance and to illustrate its effectiveness in static as well as vibration problems for anisotropic laminated plates and shells.

Wilt, T. E.↗
NASA NTRS1989

On finite element implementation and computational techniques for constitutive modeling of high temperature composites

The research work performed during the past year on finite element implementation and computational techniques pertaining to high temperature composites is outlined. In the present research, two main issues are addressed: efficient geometric modeling of composite structures and expedient numerical integration techniques dealing with constitutive rate equations. In the first issue, mixed finite elements for modeling laminated plates and shells were examined in terms of numerical accuracy, locking property and computational efficiency. Element applications include (currently available) linearly elastic analysis and future extension to material nonlinearity for damage predictions and large deformations. On the material level, various integration methods to integrate nonlinear constitutive rate equations for finite element implementation were studied. These include explicit, implicit and automatic subincrementing schemes. In all cases, examples are included to illustrate the numerical characteristics of various methods that were considered.

Saleeb, A. F.↗
NASA NTRS1988

A mixed formulaton of C(0)-linear triangular plate/shell element - The role of edge shear constraints

A simple and effective linear C(0)-tiangular element for plates and shells is developed on the basis of the Hellinger-Reissner mixed variational principle with independently assumed stress and displacement fields. Two main features are emphasized in this development concerning the assumed transverse shear stress field. First, this assumption results in edge-type penalty constraints in the thin plate/shell regimes. Second, the element is used in the form of a four-triangle, cross-diagonal macroelement mesh. As a result, the element is shown to be free from shear locking in thin plate/shell applications, and it satisfies all the appropriate patch tests required for Kirchhoff plate models. In addition, the element exhibits good overall convergence properties in a variety of test problems for plates and shells. Finally, from the computational standpoint, the element is very efficient since all stiffness component matrices are derived in explicit forms.

Saleeb, A. F.↗
NASA NTRS1987

An efficient quadrilateral element for plate bending analysis

A simple, shear flexible, quadrilateral plate element is developed based on the Hellinger/Reissner mixed variational principle with independently assumed displacement and stress fields. The crucial point of the selection of appropriate stress parameters is emphasized in the formulation. For this purpose, a set of guidelines is formulated based on the follwoing considerations: (1) suppression of all kinematic deformation modes, (2) the element has a favorable value for the constraint index in the thin plate limit, and (3) element properties are frame-invariant. For computer implementation the components of the element stiffness matrix are evaluated analytically using the symbolic manipulation package MACSYMA. The effectiveness and practical usefulness of the proposed element are demonstrated by the numerical results of a variety of problems involving thin and moderately thick plates under different loading and support conditions.

Saleeb, A. F.↗
NASA NTRS1987

A quadrilateral shell element using a mixed formulation

A simple quadrilateral shell element consisting of five nodes, four corner nodes and a central node, is developed for linear elastic analysis of thin as well as moderately thick shells. Based on a modified Hellinger-Reissner principle, finite element equations are derived from the assumed displacement and strain fields. By carefully choosing appropriate strain terms, all kinematic deformation modes are suppressed. Although the present element is similar to a displacement-based degenerated shell, no locking is experienced when it is applied to thin shell problems. Five examples are given to illustrate the analysis capability of the shell element. Numerical results indicate that the element shows fast mesh convergence and gives excellent stress predictions.

Saleeb, A. F.↗
NASA NTRS1986

On the numerical performance of three-dimensional thick shell elements using a hybrid/mixed formulation

Three-dimensional thick shell elements with 8, 16, and 18 nodes are formulated by using the hybrid/mixed method. In bending applications, these elements are free from locking effect and give improved stress predictions. Finite element equations are derived from the Hellinger-Reissner variational principle in which both the displacement and stress fields are approximated by independent interpolation functions. For the assumption of stress parameters, three guidelines are followed: (1) suppression of kinematic deformation modes, (2) invariant element property, and (3) the constraint index exhibited by the element, when applied to constrained-media problems, must be greater than or equal to one. Numerical results are presented to show the element's behavior characteristics regarding sensitivity to locking, distortion effect (patch tests), mesh convergence and the accuracy of stress evaluation.

Graf, W.↗
NASA NTRS1986

On the symbolic manipulation and code generation for elasto-plastic material matrices

A computerized procedure for symbolic manipulations and FORTRAN code generation of elastoplastic material matrix for finite element applications is presented. Special emphasis is placed on expression simplifications during intermediate derivations, optimal code generation, and interface with the main program. A systematic procedure is outlined to avoid redundant algebraic manipulations. Symbolic expressions of the derived material stiffness matrix are automatically converted to RATFOR code which is then translated into FORTRAN statements through a preprocessor. To minimize the interface problem with the main program, a template file is prepared so that the translated FORTRAN statements can be merged into the file to form a subroutine (or a submodule). Three constitutive models; namely, von Mises plasticity, the Drucker-Prager model, and a concrete plasticity model, are used as illustrative examples.

Chang, T. Y.↗