Ultrafast photoresponse of vertically oriented TMD films probed in a vertical electrode configuration on Si chips
The probing geometry plays a decisive role in the photosensitivity and response time of vertically oriented TMD thin films.
Engineering topics
Publications and source records attributed to Sainio, Sami.
The probing geometry plays a decisive role in the photosensitivity and response time of vertically oriented TMD thin films.
The solid-liquid electrochemical interface offers a two-dimensional environment for geometrically confined interfacial reactions to tailor electrode surface chemistry under operating conditions. In this study, we demonstrate that the dissolution and redeposition kinetics of transition metal cations, a ubiquitous phenomenon at the electrochemical interface, can be manipulated to regulate the chemical composition and crystal structure of the electrode surface as well as the overall electrochemical performance. Foreign cations (e.g., Ti 4+ ), either added as electrolyte additives or dissolved from surface coatings, can rapidly participate in the electrode dissolution-redeposition process, and facilitate the establishment of the dissolution-redeposition equilibrium. Our work expands the control over the electrochemical reactions at the solid-liquid interface and provides new insights into interfacial studies in electrochemistry and surface science.
We report aside from band gap reduction, little is understood about the effect of the tin-for-lead substitution on the fundamental optical and optoelectronic properties of metal halide perovskites (MHPs), especially when transitioning from 3D to lower dimensional structures. Herein, we take advantage of the spectro-scopic isolation of excitons in 2D MHPs to study the intrinsic differences between lead and tin MHPs. The exciton’s spectral fine structure indicates a larger polaron binding energy in tin MHPs. Additionally, the electroabsorption responses of the 2D MHPs demonstrates that tin MHPs have exciton binding energies 1.5–2× lower than that of their lead counterparts. Despite the lower binding energy, the excitons in tin MHPs are more Frenkel-like with small radii, small polarizabilities, and large dipole moments. These results are interpreted as consequences of small polaron formation and disorder-induced dipole moments. This work highlights the wide range of intrinsic differences between lead and tin MHPs as well as the complexity of excited states in these systems.
Abstract In the spinel oxide cathode family, LiNi 0.5 Mn 1.5 O 4 (LNMO) shows a high operating voltage (≈4.7 V vs Li/Li + ) and excellent Li‐ion mobility with stable 3D conducting channels. Ni/Mn cation disordered and ordered phases usually coexist in LNMO materials, and they have distinct structural and electrochemical properties, resulting in different battery performances for LNMO materials with different phase compositions. Identifying the correlation between phase compositions and electrochemical properties is of significance to the improvement of battery performance and understanding of degradation mechanisms. Herein, the disordered/ordered phase compositions in LNMO materials are tailored by post‐annealing strategies and their impacts on electrochemical performance and degradation mechanisms from the surface to the bulk are systematically investigated. The ordered phase increases rapidly as Mn 3+ is oxidized to Mn 4+ through a post‐annealing process. LNMO with an intermediate fraction of disordered and ordered phases gives rise to improved cycling stability. This article further reports that a high ordered phase fraction can preferentially protect Ni from dissolution during cycling. However, these results suggest that the transition metal dissolution and surface structural change of LNMO do not exhibit a direct correlation with cycling stability. These results indicate the capacity fading mainly correlates with the bulk structural distortion, leading to decreased Li‐ion kinetics.
Abstract Understanding how various redox activities evolve and distribute in disordered rocksalt oxides (DRX) can advance insights into manipulating materials properties for achieving stable, high‐energy batteries. Herein, the authors present how the reaction kinetics and spatial distribution of redox activities are governed by the particle size of DRX materials. The size‐dependent electrochemical performance is attributed to the distinct cationic and anionic reaction kinetics at different sizes, which can be tailored to achieve optimal capacity and stability. Overall, the local charged domains in DRX particles display random heterogeneity caused by the isotropic delithiation pathways. Owing to the kinetic limitation, the micron‐sized particles exhibit a holistic “core‐shell” charge distribution, whereas sub‐micron particles show more uniform redox reactions throughout the particles and ensembles. Sub‐micron DRX particles exhibit increasing anionic redox activities yet inferior cycling stability. In summary, engineering particle size can effectively modulate how cationic and anionic redox activities evolve and distribute in DRX materials.
Not Available
Connecting a material's surface chemistry with its electrocatalytic performance is one of the major questions in analytical electrochemistry. This is especially important in many sensor applications where analytes from complex media need to be measured. Unfortunately, today this connection is still largely missing except perhaps for the most simple ideal model systems. Here we present an approach that can be used to obtain insights about this missing connection and apply it to the case of carbon nanomaterials. In this paper we show that by combining advanced computational techniques augmented by machine learning methods with x-ray absorption spectroscopy (XAS) and electrochemical measurements, it is possible to obtain a deeper understanding of the correlation between local surface chemistry and electrochemical performance. As a test case we show how by computationally assessing the growth of amorphous carbon (a-C) thin films at the atomic level, we can create computational structural motifs that may in turn be used to deconvolute the XAS data from the real samples resulting in local chemical information. Then, by carrying out electrochemical measurements on the same samples from which x-ray spectra were measured and that were further characterized computationally, it is possible to gain insight into the interplay between the local surface chemistry and electrochemical performance. To demonstrate this methodology, we proceed as follows: after assessing the basic electrochemical properties of a-C films, we investigate the effect of short HNO 3 treatment on the sensitivity of these electrodes towards an inner sphere redox probe dopamine to gain knowledge about the influence of altered surface chemistry to observed electrochemical performance. Overall, these results pave the way towards a more general assessment of electrocatalysis in different systems and provide the first steps towards data driven tailoring of electrode surfaces to gain optimal performance in a given application.
In this work, we demonstrate how to identify and characterize the atomic structure of pristine and functionalized graphene materials from a combination of computational simulation of X-ray spectra, on the one hand, and computer-aided interpretation of experimental spectra, on the other. Despite the enormous scientific and industrial interest, the precise structure of these 2D materials remains under debate. As we show in this study, a wide range of model structures from pristine to heavily oxidized graphene can be studied and understood with the same approach. We move systematically from pristine to highly oxidized and defective computational models, and we compare the simulation results with experimental data. Comparison with experiments is valuable also the other way around; this method allows us to verify that the simulated models are close to the real samples, which in turn makes simulated structures amenable to several computational experiments. Our results provide ab initio semiquantitative information and a new platform for extended insight into the structure and chemical composition of graphene-based materials.
We report intercalative deionization (IDI) uses two cation intercalation electrodes separated by an anion exchange membrane in a symmetric cell design that has the potential to deliver electrochemically desalinated water in an energy- and water-efficient way. Here, we define and measure metrics to describe the performance and lifetime of IDI cells and compare them for NaCl and CaCl 2 feed solutions. With 20 mM NaCl, NiHCF/AEM/NiHCF flow cells achieve 10 mM average concentration change at a productivity of 20 l/h/m 2 and 5 mM average concentration change at 130 l/h/m 2 . In both cases the cells are operated at a 3C current rate and consume ~30 Wh/m 3 of energy. With 10 mM CaCl 2 , the specific capacity and salt removal of IDI flow cells is ~4 times lower. NiHCF/NiHCF beaker cells with CaCl 2 electrolyte suffer from strong capacity fade, while the same cells with NaCl electrolyte achieve 500 cycles without any capacity fade. Our post-mortem analysis using X-ray diffraction, secondary electron microscopy, energy dispersive X-ray spectroscopy, synchrotron-based X-ray absorption spectroscopy and micro X-ray fluorescence mapping reveals that NiHCF dissolves upon repeated intercalation with Ca 2+ , releasing residual K + , Ni 2+ and Fe(CN) 6 3 , which precipitates as a crystalline decomposition product on the electrodes. This side reaction deprives the active material NiHCF of charge compensating Fe, and thus accounts for the observed capacity fade.
Oxygen redox plays a prominent role in enhancing the energy density of Mn-based layered cathodes. However, understanding the factors affecting the reversibility of oxygen redox is nontrivial due to complicated structural and chemical transformations. Here in this paper, we show that local Mn–O symmetry induced structural/chemical evolutions majorly dictate the reversibility of oxygen redox of Na x Li y Mn 1–y O 2 in Na cells. Na x Li y Mn 1–y O 2 with Jahn–Teller distorted MnO 6 octahedra undergoes severe Mn dissolution during cycling, which destabilizes the transition metal layer resulting in poor Li retention and irreversible oxygen redox. Jahn–Teller distortion of MnO 6 octahedra can be suppressed by modulating the local charge of Mn and Mn–O distance through Mg/Ti dual doping. This leads to reduced Mn dissolution and more reversible oxygen redox. Such stabilization significantly improves the electrochemical performance of Mg/Ti dual doped Na x Li y Mn 1–y O 2 . Through this work, we show that local structural stabilization through local chemical environment modification can promote reversible oxygen redox in layered cathodes.
Stabilizing high-valent redox couples and exotic electronic states necessitates an understanding of the stabilization mechanism. In oxides, whether they are being considered for energy storage or computing, highly oxidized oxide-anion species rehybridize to form short covalent bonds and are related to significant local structural distortions. In intercalation oxide electrodes for batteries, while such reorganization partially stabilizes oxygen redox, it also gives rise to substantial hysteresis. In this work, we investigate oxygen redox in layered Na 2-x Mn 3 O 7 , a positive electrode material with ordered Mn vacancies. We prove that coulombic interactions between oxidized oxide-anions and the interlayer Na vacancies can disfavor rehybridization and stabilize hole polarons on oxygen (O-) at 4.2 V vs. Na/Na + . These coulombic interactions provide thermodynamic energy saving as large as O–O covalent bonding and enable ~40 mV voltage hysteresis over multiple electrochemical cycles with negligible voltage fade. As such, our results establish a complete picture of redox energetics by highlighting the role of coulombic interactions across several atomic distances and suggest avenues to stabilize highly oxidized oxygen for applications in energy storage and beyond.
Successful deployment of carbon nanomaterials in many applications, such as sensing, energy storage, and catalysis, relies on the selection, synthesis, and tailoring of the surface properties. Predictive analysis of the behavior is difficult without detailed knowledge of the differences between various carbon nanomaterials and their surface functionalization, thus leaving the selection process to traditional trial-and-error work. The present characterization fills this knowledge gap for carbon nanomaterial surface properties with respect to chemical states and functionalization. We present an overview of the chemical trends that can be extracted from soft X-ray absorption spectroscopy (XAS) spectra on an extended set of nonideal carbon nanomaterials as a function of sp 2 bonded carbon and bond ordering. In particular, the surface chemical state, the presence of long-range order in the carbon matrix, and a qualitative estimation of the amount of oxygen and nitrogen and their respective functional group formation on the material surface, together with the detailed material fabrication parameters, are reported. The results expand our understanding of carbon nanomaterial functionalization, which can support material selection in practice, provided that the specifications of the application are known.
Metal catalysts are necessary for fabricating carbon nanotubes, but are often considered impurities in the end products, and arduous steps are used to remove catalyst residues from the nanotube structure. However, as metals can be electrocatalytic, instead of removing them we can utilize their role in detection of analgesics. Herein, we study the physicochemical properties of Fe-containing single-walled carbon nanotubes (SWCNTs), and the effect of simple oxidative pretreatment on them. We show that a gentle anodic pretreatment i) increased the amount of oxidized Fe nanoparticles, most likely exhibiting phases Fe3O4 and Fe2O3 and ii) effectively removed disordered carbonaceous material from SWCNT bundles surfaces. Pretreatment had only a marginal effect on sensitivity towards analgesics. However, interestingly, selectivity of Fe-SWCNTs towards paracetamol and morphine could be modified with pretreatment. Through this kind of in-depth investigation, we can, to a certain extent, correlate various material properties of SWCNTs with the observed electrochemical performance. We show this approach allows us to evaluate what factors in SWCNTs truly affect the electrochemical detection of biomolecules.
Recent studies have suggested that Co-free, Ni-rich layered cathodes (e.g., doped LiNiO2) can provide promising battery performance for practical applications. However, these layered cathodes suffer from significant surface instability during various stages of the sample history, which generates inherent challenges for achieving stable battery performance and obtaining statistically representative characterization results. To reliably report the surface chemistry of these materials, delicate controls of stepwise sample preparation are required. In this study, we aim to reveal how the surface chemistry of LiNiO2 based materials changes with various environments, including human exhalation, sample storage, sample preparation, electrochemistry cycling, and surface doping. Our results demonstrate that the surface of these materials is highly reactive and prone to alter at various stages of sample handling and characterization. The sensitive surface could impact the interpretation of the surface chemical and structural information, including surface carbonate formation, transition metal reduction and dissolution, and surface reconstruction. Importantly, the heterogeneity of the surface degradation calls for a consolidation of nanoscale, high-resolution characterization, and ensemble-averaged methods in order to improve statistical representation. Furthermore, the doping chemistry can effectively mitigate the surface degradation and improve overall battery performance due to the enhanced surface oxygen retention. Our study highlights the necessity of strict measurements through complementary characterizations at multiple length scales to eliminate unintentional biased conclusions.
Biofouling affects the redox kinetics of outer and inner sphere probes on carbon surfaces drastically differently.
Single-crystal materials have played a unique role in the development of high-performance cathode materials for Li batteries due to their favorable chemomechanical stability. The molten salt synthesis method has become one of the most prominent techniques used to synthesize single-crystal layered and spinel materials. In this work, the molten salt synthesis method is used as a technique to tune both the morphology and Mn 3+ content of high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) cathodes. The resulting materials are thoroughly characterized by a suite of analytical techniques, including synchrotron X-ray core-level spectroscopy, which are sensitive to the material properties on multiple length scales. Furthermore, the multidimensional characterization allows us to build a materials library according to the molten salt phase diagram as well as to establish the relationship among synthesis, material properties, and battery performance. The results of this work show that the Mn 3+ content is primarily dependent on the synthesis temperature and increases as the temperature is increased. Additionally, the particle morphology is mostly dependent on the composition of the molten salt flux, which can be tailored to obtain well-defined octahedrons enclosed by (111) facets, plates with predominant ($11\tilde{2}$) facets, irregularly shaped particles, or mixtures of these. The electrochemical measurements indicate that the Mn 3+ content has a larger contribution to the battery performance of LNMO than do morphological characteristics and that a significant amount of Mn 3+ could become detrimental to the battery performance. However, with similar Mn 3+ contents, morphology still plays a role in influencing the battery cycle life and rate performance. The insights of molten salt synthesis parameters on the formation of LNMO, with deconvolution of the roles of Mn 3+ and morphology, are crucial to continuing studies in the rational design of LNMO cathode materials for high-energy Li batteries.
Oxycodone is a strong opioid frequently used as an analgesic. Although proven efficacious in the management of moderate to severe acute pain and cancer pain, use of oxycodone imposes a risk of adverse effects such as addiction, overdose, and death. Fast and accurate determination of oxycodone blood concentration would enable personalized dosing and monitoring of the analgesic as well as quick diagnostics of possible overdose in emergency care. However, in addition to the parent drug, several metabolites are always present in the blood after a dose of oxycodone, and to date, there is no electrochemical data available on any of these metabolites. In this paper, a single-walled carbon nanotube (SWCNT) electrode and a Nafion-coated SWCNT electrode were used, for the first time, to study the electrochemical behavior of oxycodone and its two main metabolites, noroxycodone and oxymorphone. Both electrode types could selectively detect oxycodone in the presence of noroxycodone and oxymorphone. However, we have previously shown that addition of a Nafion coating on top of the SWCNT electrode is essential for direct measurements in complex biological matrices. Therefore, in this work, the Nafion/SWCNT electrode was further characterized and used for measuring clinically relevant concentrations of oxycodone in buffer solution. The limit of detection for oxycodone with the Nafion/SWCNT sensor was 85 nM, and the linear range was 0.5–10 μM in buffer solution. Furthermore, this study shows that the fabricated Nafion/SWCNT sensor has potential to be applied in clinical concentration measurements.
In this work, the impact of liquid electrolyte soaking on the interfacial resistance between the garnet-structured Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolyte and metallic lithium has been studied. Lithium carbonate (Li 2 CO 3 ) formed by inadvertent exposure of LLZO to ambient conditions is generally known to increase interfacial impedance and decrease lithium wettability. Soaking LLZO powders and pellets in the electrolyte containing lithium tetrafluoroborate (LiBF 4 ) shows a significantly reduced interfacial resistance and improved contact between lithium and LLZO. Raman spectroscopy, X-ray diffraction, and soft X-ray absorption spectroscopy reveal how Li 2 CO 3 is continuously removed with increasing soaking time. On-line mass spectrometry and free energy calculations show how LiBF 4 reacts with surface carbonate to form carbon dioxide. Using a very simple and scalable process that does not involve heat-treatment and expensive coating techniques, we show that the Li–LLZO interfacial resistance can be reduced by an order of magnitude.