Engineering Papers⌕ Search

Engineering topics

Sahu, Ayaskanta

Publications and source records attributed to Sahu, Ayaskanta.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Coupling of Infrared Active Colloidal Quantum Dots and Amorphous Selenium for Fast and Sensitive Photodetection

Colloidal quantum dot (CQD) based infrared (IR) photodetectors offer facile wavelength tunability in the IR and low-cost fabrication. However, owing to their large surface areas, CQDs intrinsically have significant surface traps critically affecting the speed of CQD photodetectors, typically mediated through tedious surface passivation efforts. In this report, an alternative strategy involving coupling of near-IR photoactive lead sulfide CQDs with a thermally evaporated amorphous selenium (a-Se) hole transport layer is proposed. By separating the detector into a photon absorbing CQD region and a charge transport a-Se region, the study takes advantage of the extremely low noise, predominantly hole-only transport process in a-Se. Here, a high 3 dB bandwidth of 2.5 MHz and a competitive specific detectivity of 2.5 × 10 11 Jones at room temperature are demonstrated at 980 nm. This report serves as a first demonstration of strong coupling between an IR active CQD absorber and a-Se, which paves the path to obtain fast and highly photoresponsive IR photodetection in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Vertical Architecture Solution-Processed Quantum Dot Photodetectors with Amorphous Selenium Hole Transport Layer

Colloidal quantum dots (CQDs) provide wide spectral tunability and high absorption coefficients owing to quantum confinement and large oscillator strengths, which along with solution processability, allow a facile, low-cost, and room-temperature deposition technique for the fabrication of photonic devices. However, many solution-processed CQD photodetector devices demonstrate low specific-detectivity and slow temporal response. To achieve improved photodetector characteristics, limiting carrier recombination and enhancing photogenerated carrier separation are crucial. In this study, we develop and present an alternate vertical-stack photodetector wherein we use a solution-processed quantum dot photoconversion layer coupled to an amorphous selenium (a-Se) wide-bandgap charge transport layer that is capable of exhibiting single-carrier hole impact ionization and is compatible with active-matrix readout circuitry. This a-Se chalcogenide transport layer enables the fabrication of high-performance and reliable solution-processed quantum dot photodetectors, with enhanced charge extraction capabilities, high specific detectivity (D* ~ 0.5–5 × 10 12 Jones), fast 3 dB electrical bandwidth (3 dB BW ~ 22 MHz), low dark current density (J D ~ 5–10 pA/cm 2 ), low noise current (i n ~ 20–25 fW/Hz 1/2 ), and high linear dynamic range (LDR ~130–150 dB) across the measured visible electromagnetic spectrum (~405–656 nm).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

n-Type doping of a solution processed p-type semiconductor using isoelectronic surface dopants for homojunction fabrication

The p-n junction is one of the fundamental requirements for a practical semiconductor-based electronic device. Designing a heterojunction comprising of dissimilar p-type and n-type semiconductors calls for careful energy level considerations, both when selecting the semiconductor materials as well as the metal contacts. A homojunction based on a single semiconductor simplifies this task, as energy levels of the p-type and n-type materials are already fairly similar, allowing for easier selection of contacts. Traditionally, homojunctions rely on doping of a bulk semiconductor to achieve p- and n-type transport through controlled addition of aliovalent dopants via energy-intensive processes such as ion implantation or thermal annealing. Exact control of doping in nanocrystalline semiconductors is significantly more challenging, due to self-purification effects. However, owing to their large surface areas, surface moieties can be utilized to both dope the nanostructures as well as tune their energy levels. Here, we present a facile technique based on an isoelectronic surface dopant in order to achieve p- and n-type materials based on the same semiconductor. We show that thin p-type colloidal Bi 2 Te 3 nanowires can be switched to n-type through surface functionalization, thus increasing the availability of new nanocrystalline solution-processable p-n homojunctions.

42 ENGINEERING↗
DOE OSTI2020

Evaluating the Ratio of Electron and Hole Mobilities from a Single Bulk Sample Using Photo-Seebeck Effect

When a semiconductor is under photoexcitation, the voltage response to a temperature gradient is the photo-Seebeck effect. In this work, we study this effect, focusing on the contribution from transport of photo-excited carriers. We demonstrate that by combining photo-Seebeck with photoconductivity measurements, one can determine the ratio between electron and hole mobilities, and hence both of them when one is known. This is found for the case of defect-free samples, where no detail on the absorbance, carrier lifetime or recombination is necessary. Our method reported here does not require chemical doping, which could introduce defects and is often not feasible. It applies to both thin film and bulk samples. Experiment wise, photo-Seebeck effect is relatively easy to implement, or added to existing systems. In a broader context, for semiconductors with significant influence from defects, our result suggests that the photo-Seebeck behavior can still be understood. In this case another photo-transport property is necessary, in order to identify the mobilities of carriers and information regarding the defects. This framework integrates the information from photoexcitation and thermal gradients to provide a general method to determine fundamental electronic properties of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis of luminescent core/shell α-Zn 3 P 2 /ZnS quantum dots

Metal chalcogenide nanoparticles offer vast control over their optoelectronic properties via size, shape, composition, and morphology which has led to their use across fields including optoelectronics, energy storage, and catalysis. While cadmium and lead-based nanocrystals are prevalent in applications, concerns over their toxicity have motivated researchers to explore alternate classes of nanomaterials based on environmentally benign metals such as zinc and tin. The goal of this research is to identify material systems that offer comparable performance to existing metal chalcogenide systems from abundant, recyclable, and environmentally benign materials. With band gaps that span the visible through the infrared, II–V direct band gap semiconductors such as tetragonal zinc phosphide (α-Zn 3 P 2 ) are promising candidates for optoelectronics. To date, syntheses of α-Zn 3 P 2 nanoparticles have been hindered because of the toxicity of zinc and phosphorus precursors, surface oxidation, and defect states leading to carrier trapping and low photoluminescence quantum yield. Here, we report a colloidal synthesis of quantum confined α-Zn 3 P 2 nanoparticles from common phosphorus precursor tris(trimethylsilyl)phosphine and environmentally benign zinc carboxylates. Shelling of the nanoparticles with zinc sulfide is shown as a method of preventing oxidation and improving the optical properties of the nanoparticles. These results show a route to stabilizing α-Zn 3 P 2 nanoparticles for optoelectronic device applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Graded thermoelectric materials

This disclosure provides systems, methods, and apparatus related to graded thermoelectric materials. In one aspect, a method includes providing a plurality of nanostructures. The plurality of nanostructures comprise a thermoelectric material, with nanostructures of the plurality of nanostructures having first ligands disposed on surfaces of the nanostructures. The plurality of nanostructures is deposited on a substrate to form a layer. The layer is contacted with a solution containing second ligands. A ligand exchange process occurs where some of the first ligands disposed on the plurality of nanostructures are replaced with the second ligands. A first region of the layer is removed from contact with the solution so that the ligand exchange process does not occur in the first region of the layer, with the ligand exchange process occurring in the layer in contact with the solution. The layer is then removed from contact with the solution.

36 MATERIALS SCIENCE↗