Engineering Papers⌕ Search

Engineering topics

Ryan, Joseph V

Publications and source records attributed to Ryan, Joseph V.

Low Activity Waste Glass Waste Form Data Package for Hanford's Integrated Disposal Facility Performance Assessment - 16480

A Direct Feed Low Activity Waste (DFLAW) flowsheet has been initiated to begin immobilization of Hanford tank wastes. In the DFLAW configuration, a pretreatment system will segregate the high level and the low activity wastes (LAW). The LAW will be immobilized in the Waste Treatment Plant (WTP) and disposed of in Hanford's Integrated Disposal Facility (IDF). To obtain authorization to dispose of wastes in the IDF, a Performance Assessment (PA) must be completed in accordance with DOE Order 435.1. The PA shall include calculations of potential doses to representative future members of the public and potential releases from the facility to provide a reasonable expectation that performance objectives will not be exceeded as a result of operation and closure of the facility. To support the development of the PA, data from ILAW glass testing are needed to model the long term release of contaminants over the compliance period and verify that impacts to groundwater quality will be within performance objective limits. Washington River Protection Solutions is conducting an ILAW glass testing program to produce the required data. This program is a combined effort involving National Laboratories with known expertise in glass waste form research. The work involves accelerated testing to develop parameters that can be used in computer simulations of glass corrosion and contaminant release in the IDF environment. The results of this work will be compiled in an ILAW glass waste form performance data package for the IDF PA. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Monte Carlo Simulations of the Corrosion of Aluminoborosilicate Glasses

Aluminum is one of the most common components included in nuclear waste glasses. Therefore, Monte Carlo (MC) simulations were carried out to investigate the influence of aluminum on the rate and mechanism of dissolution of sodium borosilicate glasses in static conditions. The glasses studied were in the compositional range (70-2x)% SiO2 x% Al2O3 15% B2O3 (15+x)% Na2O, where 0 ≤ x ≤ 15%. The simulation results show that increasing amounts of aluminum in the pristine glasses slow down the initial rate of dissolution as determined from the rate of boron release. However, the extent of corrosion - as measured by the total amount of boron release - initially increases with addition of Al2O3, up to 5 Al2O3 mol%, but subsequently decreases with further Al2O3 addition. The MC simulations reveal that this behavior is due to the interplay between two opposing mechanisms: (1) aluminum slows down the kinetics of hydrolysis/condensation reactions that drive the reorganization of the glass surface and eventual formation of a blocking layer; and (2) aluminum strengthens the glass thereby increasing the lifetime of the upper part of its surface and allowing for more rapid formation of a blocking layer. Additional MC simulations were performed whereby a process representing the formation of a secondary aluminosilicate phase was included. Secondary phase formation draws dissolved glass components out of the aqueous solution, thereby diminishing the rate of condensation and delaying the formation of a blocking layer. As a result, the extent of corrosion is found to increase continuously with increasing Al2O3 content, as observed experimentally. For Al2O3 < 10 mol%, the MC simulations also indicate that, because the secondary phase solubility eventually controls the aluminum content in the part of the altered layer in contact with the bulk aqueous solution, the dissolved aluminum and silicon concentrations at steady state are not dependent on the Al2O3 content of the pristine aluminoborosilicate glass.

Environmental Molecular Sciences Laboratory↗

An international initiative on long-term behavior of high-level nuclear waste glass

Nations using borosilicate glass as an immobilization material for radioactive waste have reinforced the importance of scientific collaboration to obtain a consensus on the mechanisms controlling the long-term dissolution rate of glass. This goal is deemed to be crucial for the development of reliable performance assessment models for geological disposal. The collaborating laboratories all conduct fundamental and/or applied research using modern materials science techniques. This paper briefly reviews the radioactive waste vitrification programs of the six participant nations and summarizes the current state of glass corrosion science, emphasizing the common scientific needs and justifications for on-going initiatives.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Chalcogen-based aerogels as a multifunctional platform for remediation of radioactive iodine

Aerogels employing chalcogen-based (i.e., S, Se, and/or Te) structural units and interlinking metals are termed chalcogels and have many emerging applications. Here, chalcogels are discussed in the context of nuclear fuel reprocessing and radioactive waste remediation. Motivated by previous work on removal of heavy metals in aqueous solution, we explored the application of germanium sulfide chalcogels as a sorbent for gas-phase I2 based on Pearson's Hard/Soft Acid-Base (HSAB) principle. This work was driven by a significant need for high-efficiency sorbents for I-129, a long-lived isotope evolved during irradiated UO2 nuclear fuel reprocessing. These chalcogel compositions are shown to possess an affinity for iodine gas, I2(g), at various concentrations in air and the affinity is attributed to a strong chemical attraction between the chalcogen and I2(g), according to the HSAB principle. The high sorption efficiency is facilitated by the high porosity as well as the exceptionally large surface area of the chalcogels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Summary Report on the Volatile Radionuclide and Immobilization Research for FY2011 at PNNL

The materials development summarized here is in support of the Waste Forms campaign, Volatile Radionuclide task. Specifically, materials are being developed for the removal and immobilization of iodine and krypton, specifically 129I and 85Kr. During FY 2011, aerogel materials were investigated for removal and immobilization of 129I. Two aerogel formulations were investigated, one based on silica aerogels and the second on chalcogen-based aerogels (i.e., chalcogels). A silica aerogel was tested at ORNL for total I2 sorption capacity. It was determined to have 48 mass% capacity while having little physisorbed I2 (I2 not taken up in the aerogel pores). For 85Kr, metal organic framework (MOF) structures were investigated and a new MOF with about 8 mass% capacity for Xe and Kr. The selectivity can be changed from Xe > Kr to Xe < Kr simply by lowering the temperature below 0 C. A patent disclosure has been filed. Lastly, silicon carbide (SiC) was loaded with Kr. The diffusion of Kr in SiC was found to be less than detectable at 500 C.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Engineering Glass Passivation Layers -Model Results

The immobilization of radioactive waste into glass waste forms is a baseline process of nuclear waste management not only in the United States, but worldwide. The rate of radionuclide release from these glasses is a critical measure of the quality of the waste form. Over long-term tests and using extrapolations of ancient analogues, it has been shown that well designed glasses exhibit a dissolution rate that quickly decreases to a slow residual rate for the lifetime of the glass. The mechanistic cause of this decreased corrosion rate is a subject of debate, with one of the major theories suggesting that the decrease is caused by the formation of corrosion products in such a manner as to present a diffusion barrier on the surface of the glass. Although there is much evidence of this type of mechanism, there has been no attempt to engineer the effect to maximize the passivating qualities of the corrosion products. This study represents the first attempt to engineer the creation of passivating phases on the surface of glasses. Our approach utilizes interactions between the dissolving glass and elements from the disposal environment to create impermeable capping layers. By drawing from other corrosion studies in areas where passivation layers have been successfully engineered to protect the bulk material, we present here a report on mineral phases that are likely have a morphological tendency to encrust the surface of the glass. Our modeling has focused on using the AFCI glass system in a carbonate, sulfate, and phosphate rich environment. We evaluate the minerals predicted to form to determine the likelihood of the formation of a protective layer on the surface of the glass. We have also modeled individual ions in solutions vs. pH and the addition of aluminum and silicon. These results allow us to understand the pH and ion concentration dependence of mineral formation. We have determined that iron minerals are likely to form a complete incrustation layer and we plan to look more closely at Vivianite [Fe3(PO4)2-8(H2O)] and Siderite [FeCO3] in the next stage of the project.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Summary Report for the Development of Materials for Volatile Radionuclides

The materials development summarized here is in support of the Waste Forms campaign, Volatile Radionuclide task. Specifically, materials are being developed for the removal and immobilization of iodine and krypton, specifically 129I and 85Kr. During FY 2010, aerogel materials were investigated for removal and immobilization of 129I. Two aerogel formulations were investigated, one based on silica aerogels and the second on chalcogenides. For 85Kr, metal organic framework (MOF) structures were investigated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tribology-Structure Relationships in Silicon Oxycarbide Thin Films

Silicon oxycarbide is a versatile material system that is attractive for many applications because of its ability to tune properties such as chemical compatibility, refractive index, electrical conductivity, and optical band gap through changes in composition. One particularly intriguing application lies in the production of biocompatible coatings with good mechanical properties. In this paper, we report on the wide range of mechanical and tribological property values exhibited by silicon oxycarbide thin films deposited by reactive radio frequency magnetron sputtering. Through a change in oxygen partial pressure in the sputtering plasma, the composition of the films was controlled to produce relatively pure SiO2, carbon-doped SiC, and compositions between these limits. Hardness values were 8-20 GPa over this range and the elastic modulus was measured to be between 60 and 220 GPa. We call attention to the fit of the mechanical data to a simple additive bond-mixture model for property prediction. Tribological parameters were measured using a ball-on-disk apparatus and the samples exhibited the same general trends for friction coefficient and wear rate. One film is shown to produce variable low friction behavior and low wear rate, which suggests a solid-state self-lubrication process because of heterogeneity on the nanometer scale.

36 MATERIALS SCIENCE↗

Gleenglass Swarf Research

Objective: John Sauer, Gleenglass principal, asked for research into innovative uses for a reclaimed glass slurry, also referred to as swarf. Through our research we were to determine a product and a market that could be manufactured using this fully recycled glass swarf. Background: Mr. Sauer receives the swarf from major glass manufacturers as a fine powder glass suspended in an organic dispersant and water. The swarf is produced through an industrial glass cutting process that results in the glass powder dispersed in water and recyclable glass disks; both are used in the project. Mr. Sauer's swarf studio testing has yet to produce any product with a value great enough to justify processing the swarf. Many of these limitations were believed to be due to the unknown composition and characteristics of the swarf as well as the limited lab testing ability of Mr. Sauer in his studio space. Deliverables: 1. The valuable characteristics of the swarf. 2. Products that can be produced with the swarf. 3. Market for developed products. 4. Capital investment needed to create developed product. 5. Any other applications of the swarf that were outside the scope of residential and commercial building material for use in future DOE grant proposals to the glass manufacturing facilities. 6. Additives that could change the color of the final piece to white, gray, or green.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Frequency dependent electrical measurements of amorphous GeSbSe chalcogenide thin films

A commercial bulk chalcogenide glass (Ge28Sb12Se60) was used as a source to fabricate amorphous thin films via thermal evaporation technique. At low frequencies (1 MHz) impedance spectroscopy was performed to measure electrical properties. To measure ac conductivity at microwave frequencies, a split resonance cavity technique was applied for which a model based on parallel arrangement of substrate and film capacitors was developed. This model was used to extract tan8 and ac conductivity of the films. Microwave ac conductivity was correlated with the extrapolated low frequency conductivity data confirming applicability of the universal law commonly observed in amorphous semiconductors.

36 MATERIALS SCIENCE↗

DEVELOPMENT OF GLASS COMPOSITIONS TO IMMOBILIZE ALKALI, ALKALINE EARTH, LANTHANIDE AND TRANSITION METAL FISSION PRODUCTS FROM NUCLEAR FUEL REPROCESSING

The Advanced Fuel Cycle Initiative (AFCI) waste management strategy revolves around specific treatment of individual or groups of separated waste streams. A goal for the separations processes is to efficiently manage the waste to be dispositioned as high level radioactive waste. The Advanced Fuel Cycle Initiative (AFCI) baseline technology for immobilization of the lanthanide (Ln) and transition metal fission product (TM) wastes is vitrification into a borosilicate glass. A current interest is to evaluate the feasibility of vitrifying combined waste streams to most cost effectively immobilize the wastes resulting from aqueous fuel reprocessing. Studies showed that high waste loadings are achievable for the Ln only (Option 1) stream. Waste loadings in excess of 60 wt % (on a calcined oxide basis) were demonstrated via a lanthanide borosilicate (LaBS) glass. The resulting glasses had excellent relative durability as determined by the Product Consistency Test (PCT). For a combined Ln and TM waste stream glass (Option 2), noble metal solubility was found to limit waste loading. However, the measured PCT normalized elemental releases for this glass were at least an order of magnitude below that of Environmental Assessment (EA) glass. Current efforts to evaluate the feasibility of vitrifying combined Ln, TM, alkali (Cs is the primary radionuclide of concern) and alkaline earth (Sr is the primary radionuclide of concern) wastes (Option 3) have shown that these approaches are feasible. However, waste loading limitations with respect to heat load (Cs/Sr loading), molybdenum solubility and/or noble metal solubility will likely be realized and must be considered in determining the cost effectiveness of these approaches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DC Ionization Conductivity of Amorphous Semiconductors for Radiation Detection Applications

DC ionization conductivity measurements were used to characterize the electrical response of amorphous semi-conductors to ionizing radiation. Two different glass systems were examined: a chalcopyrite glass (CdGexAs2; for x = 0.45-1.0) with a tetrahedrally coordinated structure and a chalcogenide glass (As40Se(60-x)Tex; where x = 0-12), with a layered or three dimensionally networked structure, depending on Te content. Changes in DC ionization current were measured as a function of the type of radiation (α or γ), dose rate, applied bias voltage, specimen thickness and temperature. These results demonstrate the potential of these materials for radiation detection applications.

36 MATERIALS SCIENCE↗