Engineering Papers⌕ Search

Engineering topics

Runyan, H. L.

Publications and source records attributed to Runyan, H. L..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Compressible, unsteady lifting-surface theory for a helicopter rotor in forward flight

A lifting-surface theory has been developed for a helicopter rotor in forward flight for compressible and incompressible flow. The method utilizes the concept of the linearized acceleration potential and makes use of the doublet lattice procedure. Calculations demonstrating the application of the method are given in terms of the lift distribution on a one-bladed rotor, a two-bladed rotor, and a rotor with swept-forward and swept-back tips. Also, the lift on a rotor vibrating in a pitching mode at 4 per revolution is given. Compressibility effects and interference effects for a two-bladed rotor are discussed.

Runyan, H. L.↗
NASA NTRS1985

Lifting surface theory for a helicopter rotor in forward flight

A lifting surface theory was developed for a helicopter rotor in forward flight for compressible and incompressible flow. The method utilizes the concept of the linearized acceleration potential and makes use of the vortex lattice procedure. Calculations demonstrating the application of the method are given in terms of the lift distribution on a single rotor, a two-bladed rotor, and a rotor with swept-forward and swept-back tips. In addition, the lift on a rotor which is vibrating in a pitching mode at 4/rev is given. Compressibility effects and interference effects for a two-bladed rotor are discussed.

Tai, H.↗
NASA NTRS1984

Lifting surface theory for a helicopter rotor in forward flight

A lifting surface theory was developed for a helicopter rotor in forward flight for compressible and incompressible flow. The method utilizes the concept of the linearized acceleration potential and makes use of the vortex lattice procedure. Calculations demonstrating the application of the method are given in terms of the lift distribution on a single rotor, a two-bladed rotor, and a rotor with swept-forward and swept-back tips. In addition, the lift on a rotor which is vibrating in a pitching mode at 4/rev is given. Compressibility effects and interference effects for a two-bladed rotor are discussed.

Tai, H.↗
NASA NTRS1984

Lifting surface theory for a helicopter rotor in forward flight

A lifting surface theory was developed for a helicopter rotor in forward flight for compressible and incompressible flow. The method utilizes the concept of the linearized acceleration potential and makes use of the vortex lattice procedure. Calculations demonstrating the application of the method are given in terms of the lift distribution on a single rotor, a two-bladed rotor, and a rotor with swept-forward and swept-back tips. In addition, the lift on a rotor which is vibrating in a pitching mode at 4/rev is given. Compressibility effects and interference effects for a two-bladed rotor are discussed.

Tai, H.↗
NASA NTRS1983

Lifting surface theory for a helicopter rotor in forward flight

A lifting surface theory has been developed for a helicopter rotor in forward flight for incompressible flow. The method utilized the concept of the linearized acceleration potential and make use of the vortex lattice procedures. Results in terms of lift coefficient slope for several forward flight conditions are given.

Runyan, H. L.↗
NASA NTRS1980

Noise from a vibrating propeller

This paper is concerned with an analytical study of the noise from a vibrating propeller. The influence of airfoil thickness and of steady loading are also included to provide a basis for comparison. The analysis was based on the concept of distributing sources and doublets on the surface of the blade, which were multiplied by their appropriate strength factors. The noise in the plane of the propeller was dominated by the thickness noise. Moving the observer's position to the propeller axis, the thickness noise and loading noise were zero, and a pure sinusoidal noise was found, caused by the vibrations of the propeller.

Runyan, H. L.↗
NASA NTRS1980

Effect of a flexibly mounted store on the flutter speed of a wing

A passive system proposed for increasing the flutter speed of a wing with heavy concentrated weights involves the concept of mounting the store on a pitch pivot having a very low pitch stiffness relative to the wing stiffness. This concept was investigated utilizing a two dimensional approach involving 4 degrees of freedom, namely, wing bending, wing torsion, store pitch and store vertical translation. This preliminary analysis was very encouraging and the results demonstrate that, if the uncoupled store pitch frequency was below the wing bending frequency, the flutter speed was greatly increased. A second more complete analysis was developed utilizing a three dimensional structure, but retaining the two dimensional, incompressible unsteady airforces of Theodorsen. The details of the analysis are included.

Runyan, H. L.↗
NASA NTRS1974

Application of unsteady lifting surface theory to propellers in forward flight

Development of a theory for determining the aerodynamic forces for unsteady, compressible subsonic flow on a propeller in forward flight. The acceleration potential method is used in developing the basic downwash integral equation which governs the flow. This integral equation is solved by the doublet-lattice method, which consists of placing 'load' lines at certain locations on the chord and satisfying the downwash condition at other selected positions. The examples presented include the spanwise and chordwise loading on a rotating propeller for incompressible flow, an example of compressible flow calculations, and, finally, a calculation illustrating the loss of aerodynamic damping of a propeller blade due to the passage of the blade over its own wake.

Hammond, C. E.↗
NASA NTRS1972

Space Shuttle - A new arena for the structural dynamicists.

The Space Shuttle represents the focus of NASA development endeavors for the next decade. The purpose of the shuttle is to provide a general launch capability for a variety of payloads ranging in weight to as high as 65,000 pounds. This paper concentrates on one aspect of the shuttle development, namely, dynamics and aeroelasticity. The objective of our research during the first year of activity has been directed at searching out problems peculiar to the Space Shuttle, reviewing the state of the art, and developing a program to satisfy the needs. Some of the specific items covered in this paper are vibration modes, thermal protection system dynamics, fluid dynamics, ground winds, flutter, buffet, and noise.

Runyan, H. L.↗