Engineering Papers⌕ Search

Engineering topics

Roush, T. L.

Publications and source records attributed to Roush, T. L..

44 records · Page 3

Thermal infrared observations of Mars (7.5-12.8 microns) during the 1990 opposition

Thirteen spectra of Mars, in the 7.5 to 12.8 micron wavelength were obtained on 7 Dec. 1990 from the Infrared Telescope Facility (IRTF). For these observations, a grating with an ultimate resolving power of 120 to 250 was used and wavelengths were calibrated for each grating setting by comparison with the absorption spectrum of polystyrene measured prior to each set of observations. By sampling the Nyquist limit at the shortest wavelengths, an effective resolving power of about 120 over the entire wavelength range was achieved. A total of four grating settings were required to cover the entire wavelength region. A typical observing sequence consisted of: (1) positioning the grating in one of the intervals; (2) calibrating the wavelength of positions; and (3) obtaining spectra for a number of spots on Mars. Several observations of the nearby stellar standard star, alpha Tauri, were also acquired throughout the night. Each Mars spectrum represents an average of 4 to 6 measurements of the individual Mars spots. As a result of this observing sequence, the viewing geometry for a given location or spot on Mars does not change, but the actual location of the spot on Mars's surface varies somewhat between the different grating settings. Other aspects of the study are presented.

Roush, T. L.↗

Derivation of mid-infrared (5-25 microns) optical constants of some silicates and palagonite

Recent reports concerning the mid-infrared reflectance properties of silicates coupled with recent observations of the Earth and other planets in the mid-infrared and the planned Thermal Emission Spectrometer scheduled as an instrument to be included on the Mars Observer all illustrate the increasing interest in the optical properties of materials in the mid-infrared and their direct application to remote sensing observations of other planetary surfaces. As the laboratory and observational data increase they will ultimately be modeled to aid in the understanding of the composition mineralogy, and distribution of the surface and atmospheric constituents on these bodies. In order to facilitate such quantitative analyses, knowledge regarding the optical constants (real (n) and imaginary (k) indices of refraction) of a wide variety of pertinent materials is required. Examples of the application of such quantitative analyses to the interpretation of Martian surface and atmospheric constituents, based on the optical constants of minerals, are presented. This study was initially conceived in order to aid in the interpretation of Martian surface and atmospheric aerosol mineralogy. As a result, the minerals included are biased toward samples which represent hydrated and hydroxylated silicates. These include the Al and Mg end members of the 1:1 layer lattice silicates, kaolinite and serpentine, respectively; an Al-bearing 2:1 layer lattice silicate, pyrophyllite; the Mg and Al smectite clays saponite and montmorillonite, respectively; and a palagonite, typically a poorly characterized alteration product of basaltic glass. The reflectivities of all samples were determined by placing them at the focus of a near-normal reflective attachment located in a Fourier transform spectrometer. To derive the optical constants of a material as a function of wavelength, researchers used the commonly employed technique of dispersion analysis.

Roush, T. L.↗

Ice and minerals on Callisto - A reassessment of the reflectance spectra

The results of a comparison of laboratory spectral reflectance measurements of particulate mixtures of both hydrated silicates and palagonite with water ice, on the one hand, with two previously unpublished reflectance spectra of Callisto, yield direct support for the hypothesis that the measured reflectance of Callisto includes a substantial nonice component. Hapke's (1981) equations are used in a theoretical model for thorough analysis of telescopic data; a comparison of the calculation results thus obtained with measured reflectance data for Callisto indicate that three-component, ice/magnetite/serpentine mixtures are a better match for telescopic data than two-component ice mixtures.

Roush, T. L.↗

Preliminary analysis of recent 2.2-4.2 micrometers telescopic observations of Elysium, Mars: Implications for crystallinity and hydration state of surface materials

Comparisons of the telescopic reflectance spectrum of a Martian bright region, in the 2.2 to 4.2 micrometers region, with recent laboratory studies of materials in this same wavelength range are consistent with: terrestrial materials which are dehydrated relative to the terrestrial environment, and terrestrial materials which exhibit spectral behavior indicative of some degree of sample crystallinity which is greater than that of amorphous palagonites. This second conclusion is in agreement with recent suggestions concerning the Martian bright regions. However, additional laboratory research is required in order to constrain: the degree of crystallinity required to result in the 2.8 to 2.9 micrometers spectral behavior seen in the terrestrial samples, and the limit of crystalline material which can be accommodated in a mixture with measured telescopic data of Mars (0.3 to 4.2 micrometers).

Roush, T. L.↗

Gaussian analysis of temperature effects on the reflectance spectra of mafic minerals in the 1-micron region

Gaussian band-fitting analysis has been applied to the reflectance spectra of mafic silicates, which are of geologic importance throughout much of the solar system. Reflectance spectra obtained over a sample temperature range of about 80 to 448 K of olivine, clinopyroxene, and orthopyroxene were used in order to characterize the spectral changes in the 1-micron wavelength region of these minerals as a function of temperature. Four Gaussians are required to characterize the olivine, while two Gaussians are necessary to characterize both the orthopyroxene. The trends of the individual Gaussian parameters (integrated area, width, and center position) are presented as a function of temperature for each mineral. The characterization by Gaussian analysis of the 1-micron absorption feature of all minerals yields consistent trends in center position, integrated area, and width that may prove useful in quantitative determination of these minerals in mineral mixtures.

Roush, T. L.↗

Effects of temperature on remotely sensed mineral absorption features

The present paper provides the results from a series of laboratory experiments which were conducted to investigate the variable spectral behavior of diagnostic Fe(++) crystal field absorptions in common rock-forming minerals as a function of temperature. The general goal of the study is to refine existing techniques of mineralogic and chemical characterization, based on specific optical behavior which has been measured and correlated in a systematic way. It is pointed out that the presented work, taken together with a number of recent studies, provides new information on the manner in which specific features of mafic minerals combine in rocks and soil spectra, taking into account also variations of identification and subsequent interpretation as a function of planetary surface temperature. The obtained results are directly applicable to interpretation of remotely sensed data for many solar system objects, particularly Mars, asteroids, the moon, earth, and Mercury.

Singer, R. B.↗

Multispectral Analysis of the Kasei Vallis-lanae Planum Region of Mars

The surficial geology of the Kasei Vallis - Lunae Planum region of Mars was investigated using the three color Viking Orbiter 1 data. Spatial resolution is 820m and Ls = 100 deg, a season of low atmospheric and and surface dustiness. This region was chosen for high quality color and thermal inertia data as well as for the diversity of volcanic plains and fluvial landform. The data was reformatted to Mercator projection and calibrated to normal reflectance using in flight calibration parameters and observed photometric properties. Color properties from this image are displayed in two forms: the Red Albedo vs. Violet Albedo two dimensional histogram, and representative 3 point spectra. Virtually the full range of regolith color properties known from prior research is represented, plus some new characteristics. Interpretations of the data are presented which address general composition and formation processes of channel and intracrater deposits.

Singer, R. B.↗

Reflectance spectroscopy - Quantitative analysis techniques for remote sensing applications

The empirical methods and scattering theories that are important for solving remote sensing problems are among the methods for remotely sensed reflectance data analysis presently compared. In the case of the photon mean optical path length concept's implications for reflectance spectra modeling, it is shown that the mean optical path length in a particulate surface is in roughly inverse proportion to the square root of the absorption coefficient. Absorption bands, which are Gaussian in shape when plotted as true absorptance vs photon energy, are also Gaussians in apparent absorptance, although they have a smaller intensity. An apparent continuum in a reflectance spectrum is modeled as a mathematical function that is used to isolate a particular absorption feature for analysis, and it is noted that this continuum should be removed by dividing it into the reflectance spectrum.

Clark, R. N.↗