Engineering Papers⌕ Search

Engineering topics

Rosenberger, Franz

Publications and source records attributed to Rosenberger, Franz.

66 records · Page 4

Process modelling for space station experiments

The work performed during the first year 1 Oct. 1987 to 30 Sept. 1988 involved analyses of crystal growth from the melt and from solution. The particular melt growth technique under investigation is directional solidification by the Bridgman-Stockbarger method. Two types of solution growth systems are also being studied. One involves growth from solution in a closed container, the other concerns growth of protein crystals by the hanging drop method. Following discussions with Dr. R. J. Naumann of the Low Gravity Science Division at MSFC it was decided to tackle the analysis of crystal growth from the melt earlier than originally proposed. Rapid progress was made in this area. Work is on schedule and full calculations were underway for some time. Progress was also made in the formulation of the two solution growth models.

Rosenberger, Franz↗

Vapor concentration measurement with photothermal deflectometry

Theoretical and experimental results for using the photothermal deflection technique to measure vapor species concentration, while minimizing the disturbance of the transport (material) parameters due to vapor heating, are developed and described. In contrast to common practice, the above constraints require using a pump-beam duty cycle of less than 50 percent. The theoretical description of the shortened heating time is based on a step-function formulation of the pumping cycle. The results are obtained as closed-form solutions of the energy equation for many chopping cycles until steady state is reached, by use of a Green's-function method. The Euler formulation of the Fermat principle is used to calculate the deflection angle. The equations are expanded to include the effects of vapor velocity on both the temperature and temperature gradient profiles. The effects of finite (unfocused) pump and probe beams and thermal (Soret) diffusion are also accounted for. Excellent agreement between theory and experiment is obtained.

Banish, R. Michael↗

Morphological evolution of growing crystals - A Monte Carlo simulation

The combined effects of nutrient diffusion and surface kinetics on the crystal morphology were investigated using a Monte Carlo model to simulate the evolving morphology of a crystal growing from a two-component gaseous nutrient phase. The model combines nutrient diffusion, based on a modified diffusion-limited aggregation process, with anisotropic surface-attachment kinetics and surface diffusion. A variety of conditions, ranging from kinetic-controlled to diffusion-controlled growth, were examined. Successive transitions from compact faceted (dominant surface kinetics) to open dendritic morphologies (dominant volume diffusion) were obtained.

Xiao, Rong-Fu↗

On the two-dimensional modelling of horizontal CVD reactors and its limitations

In order to clarify under what conditions two-dimensional theoretical models can realistically account for the actual growth rate distribution in horizontal CVD reactors, a systematic numerical study was performed, and the results were compared with published experimental data for the MOCVD of gallium arsenide. Three models of increasing complexity were studied. It is shown that two-dimensional models can produce realistic predictions only for reactors with large width-to-height (aspect) ratios, that are operated at subcritical Rayleigh number,i.e., under dominant forced flow conditions. But even then, depending on the carrier gas, thermal (Soret) diffusion must be included in the model. Furthermore, velocity corrections for finite aspect ratios must be made, and buoyancy effects can be significant in the entrance region. On the other hand, the results are relatively insensitive to axial diffusion, temperature dependence of transport properties (versus averaged properties), and an assumed Poiseuille velocity profile (versus a rigorous solution of the velocity field). Yet, boundary layer approximations are prone to give unrealistic results at the low Reynolds numbers typical for CVD operations.

Ouazzani, Jalil↗

Response of convective-diffusive transport to spatial and temporal variations in effective gravity

The response of heat, mass, and momentum transport to conditions characteristic of the microgravity environment is studied. It is found that the orientation of the experiment with respect to the steady component of the residual gravity is a crucial factor in determining the suitability of the spacecraft as a means of suppressing or eliminating unwanted effects caused by buoyant fluid motion. The process is highly sensitive to transient disturbances.

Alexander, J. Iwan D.↗

Control of nucleation and growth in protein crystal growth

The potential advantages of nucleation and growth control through temperature, rather than the addition of precipitants or removal of solvent, are discussed. A simple light scattering arrangement for the characterization of nucleation and growth conditions in solutions is described. The temperature dependence of the solubility of low ionic strength lysozyme solutions is applied in preliminary nucleation and growth experiments.

Rosenberger, Franz↗

Mass spectroscopic facility

A mass spectrometer system is described. The investigations to be conducted with the completed facility will be concerned with the high-temperature out-gassing behavior of quartz ampoules and the vapor composition in crystal growth experiments. These will give some insight on the prevailing transport mechanisms in these crystal growth experiments and supply a realistic basis for the numerical modeling of heat and mass transfer in these systems.

Rosenberger, Franz↗

Highly Non-Linear Optical (NLO) organic crystals and films. Electrooptical organic materials

Devices employing nonlinear optics (NLO) hold great promise for important applications in integrated optics, optical information processing and telecommunications. Properly designed organics possess outstanding optical and electrooptical properties which will substantially advance many technologies including electrooptical switching, optical amplification for communications, and parallel processing for hybrid optical computers. A brief comparison of organic and inorganic materials is given.

Mcmanus, Samuel P.↗

Mass spectroscopic characterization of the GeSe:GeI4 vapor transport system

The GeSe:GeI4 vapor crystal growth system was characterized mass spectroscopically. A steady-state Knudsen effusion technique was developed to simulate the equilibrium conditions at one end of a vapor transport ampoule. It was found that the previously neglected equilibrium GeSe2(s) = GeSe(v) + 1/2Se2(v) reduces the Se2(v) concentration to an extent that sublimation/condensation of GeSe becomes the dominant transport mechanism. At total pressures near 1 atm the concentration of an additional Ge-Se-I vapor species becomes comparable to that of GeSe(v).

Buchan, Nicholas I.↗

On the absence of convective stability in materials preparation on earth

The yield in the production and the performance of electronic and optical solid state devices is frequently limited by nonuniformities in the composition and structure of the underlying crystalline material. The formation of such inhomogeneities can be favored by convective heat and mass transfer during the preparation. Hence, it is often desirable to establish purely diffusive conditions in materials preparation. It has been thought that buoyancy-driven convection can be readily excluded by appropriate orientation of the density gradient with respect to the gravity vector. Such expectations overlook, however, that materials preparation processes are inherently associated with multidimensional density gradients. Hence, it is concluded, there will always be convective contributions to transport in materials processing on earth.

Rosenberger, Franz↗

On the atomic roughness of solid-vapor interfaces - Significance of many-body interactions

Published experimental data on the atomic roughness of solid-vapor interfaces (SVIs) are compiled in a table and compared with the predictions of theoretical models based on the Bragg-Williams approximation (e.g., Jackson, 1958). Significant discrepancies are observed, and a new model employing site-dependent bond strengths based on many-body-interaction effects is developed and demonstrated. Predictions for Cu, Pb, and Zn are presented in extensive tables and graphs and characterized in detail: good agreement with experimental observations of anisotropic melting is obtained.

Chen, Jenn-Shing↗

Surface roughening as a precursor to the polymorphic transition in CBr4

The morphology of CBr4 crystals was microscopically studied at temperatures near the polymorphic transition (Ttr = 47 C) during growth from the vapor. The observations presented here give evidence that surface roughening is occurring with increasing temperature as an apparent precursor of the solid state phase transition.

Ming, Nai-Ben↗