Engineering Papers⌕ Search

Engineering topics

Rose, M. Franklin

Publications and source records attributed to Rose, M. Franklin.

At least 163 records · Page 9

New Data on Microfossils from Shungites

Shungites are pre-cambrian (2Gya) carbon-rich, silicate rocks known from deposits in the north-western part of lake Onega, near the city of Petrozavodsk in Karelia (North from St. Petersburg, Russia). Shungites are extremely rich in carbon, with carbon accounting for 98% in vein shungites. Shungites have been found to exhibit interesting optical, ultrasonic, thermal, mechanical, electrical properties and have recently been found to contain small amounts of C60 fullerene. Shungite rocks from Karelia have a characteristic globular structure and are chemically inert and metastable. As part of our ongoing search for biomarkers in ancient terrestrial rocks that are of potential significance to Astrobiology, we have conducted Environmental and Field Emission Scanning Electron Micrographs of freshly fractured interior surfaces of Shungites. We find them to contain indigenous miocrofossils, similar to cyanobacteria known from the phosphorites of Khubsugul, Mongolia. We describe this investigation and provide ESEM and FESEM images of biomorphic microstructures that we interpret as indigenous microfossils in Shungites.

Hoover, Robert B.↗

Turbulent Transition in Electromagnetically Levitated Drops

Electromagnetic levitation (EML) is an important tool in materials research. Because a sample can be processed without contact with a container, experiments may be performed on high temperature, highly reactive, and undercooled liquid metals. Many of these experiments are affected by fluid flow in the sample, driven by the electromagnetic positioning force. Despite the importance of convection in these experiments, the transition to turbulence is not well understood in this system. However, we have observed a transition from laminar to turbulent flow in EML droplets in the course of microgravity experiments in TEMPUS on the Space Shuttle (STS-94). The transition occurs repeatably and over a narrow range of conditions. These experimental observations are compared with two competing theories about the transition to turbulence. Also, the results of a particle tracking study of the instabilities leading up to the transition to turbulence are presented.

Hyers, Robert W.↗

Effect of beta-ADrenergic Agonist on Cyclic AMP Synthesis in Chicken Skeletal Muscle Cells in Culture

Several beta-adrenergic receptor (bAR) agonists are known to cause hypertrophy of skeletal muscle tissue. Because it seems logical that these agonists exert their action on muscle through stimulation of cAMP synthesis, five bAR agonists encompassing a range in activity from strong to weak were evaluated for their ability to stimulate cAMP accumulation in embryonic chicken skeletal muscle cells in culture. Two strong agonists (epinephrine and isoproterenol), one moderate agonist (albuterol), and two weak agonists known to cause hypertrophy in animals (clenbuterol and cimaterol) were studied. Dose response curves were determined over six orders of magnitude in concentration for each agonist, and values were determined for their maximum stimulation of cAMP synthesis rate (Bmax) and the agonist concentration at which 50% stimulation of cAMP synthesis (EC50) occurred. Bmax values decreased in the following order: isoproterenol, epinephrine, albuterol, cimaterol, clenbuterol. Cimaterol and clenbuterol at their Bmax levels were approximately 15-fold weaker than isoproterenol in stimulating the rate of cAMP synthesis. In addition, the EC50 values for isoproterenol, cimaterol, clenbuterol, epinephrine, and albuterol were 360 nM, 630 nM, 900 nM, 2,470 nM, and 3,650 nM, respectively. Finally, dose response curves show that the concentrations of cimaterol and clenbuterol in culture media at concentrations known to cause significant muscle hypertrophy in animals had no detectable effect on stimulation of CAMP accumulation in chicken skeletal muscle cells.

Young, R. B.↗

Control of Melt Conversion Using Traveling Magnetic Fields

An axisymmetric traveling magnetic wave induces a meridional base flow in a cylindrical zone of an electrically conducting liquid. This remotely induced flow can be conveniently controlled, in magnitude and direction, and can have benefits for crystal growth applications. In particular, it can be used to significantly offset natural convection. Theoretical basics of this new technological method are presented.

Mazurruk, Konstantin↗

General Differences between Early and Late Stages of BATSE Gamma-Ray Bursts

The early and late stages of gamma-ray bursts are studied in a statistical analysis of the large sample of long BATSE events. The primary peak is used as the boundary between the early and late stages of emission. Significant differences are found between the stages: the early stage is shorter, it has harder emission, and it becomes a smaller fraction of the total burst duration for burst groups of decreasing intensity.

Mitrofanov, I. G.↗

Topside Ionosphere Parameters Observed by POLAR and DMSP at high latitudes

Several near-simultaneous Southern polar passes for both POLAR (at perigee) and DMSP spacecraft are examined. The core ion measurements from the Thermal Ion Dynamics Experiment (TIDE) on POLAR spacecraft near 5000 km altitude and the ionospheric ion and electron parameters measured by both DMSP 12 and DMSP 13 at 840 kin altitude during these near-simultaneous passes provide unique quasi-global snapshots of the ionospheric flows. We consider such parameters as the O (+) and H (+) densities, temperatures and parallel flows from POLAR/TIDE and the O (+) ion parameters and electron temperature from the DMSP observations. For some passes, auroral images from the POLAR Ultraviolet Imager (UVI) are used to complement the ion/electron parameter observations. We will also examine the interplanetary magnetic field context of these quasi-global topside ionospheric measurements.

Zeng, Wen↗

Satellite Motion Effects on Current Collection in Low Earth Orbit

Results from the Tethered Satellite System (TSS) missions unambiguously show that the electrodynamic tether system produced 2 to 3 times the predicted current levels in the tether. The pre-mission predictions were based on the well-known Parker-Murphy (PM) model, which describes the collection of current by an electrically biased satellite in the ionospheric plasma. How the TSS satellite was able to collect 2-3 times the PM current has remained an open question. In the present study, self-consistent potential and motional effects are introduced into the Thompson and Dobrowolny sheath models. As a result, the magnetic field aligned sheath-an essential variable in determining current collection by a satellite-is derived and is shown to be explicitly velocity dependent. The orientation of the satellite's orbital motion relative to the geomagnetic field is also considered in the derivation and a velocity dependent expression for the collected current is obtained. The resulting model provides a realistic treatment of current collection by a satellite in low earth orbit. Moreover, the predictions, using the appropriate parameters for TSS, are in good agreement with the tether currents measured during the TSS-1R mission.

Zhang, T. X.↗

The Effect of Solution Thermal History on Chicken Egg White Lysozyme Nucleation

Proteins are highly flexible molecules and often exhibit defined conformational changes in response to changes in the ambient temperature. Chicken egg white lysozyme has been previously shown to undergo an apparent structural change when warmed above the tetragonal/orthorhombic phase transition temperature. This is reflected by a change in the habit of the tetragonal and orthorhombic crystals so formed. In this study we show that possible conformational changes induced by heating are stable and apparently non- reversible by simple cooling. Exposure of protein solutions to temperatures above the phase change transition temperature, before combining with precipitant solution to begin crystallization, reduces final crystal numbers. Protein that is briefly warmed to 37 C, then cooled shows no sign of reversal to the unheated nucleation behavior even after storage for 4 weeks at 4 C. The change in nucleation behavior of tetragonal lysozyme crystals, attributed to a structural shift, occurs faster the greater the exposure to temperature above the equi-solubility point for the two phases. Heating for 2 h at 48 C reduces crystal numbers by 20 fold in comparison to the same solution heated for the same time at 30 C. Thermal treatment of solutions is therefore a possible tool to reduce crystal numbers and increase crystal size. The effects of a protein's previous thermal history are now shown to be a potentially critical factor in subsequent macromolecule crystal nucleation and growth studies.

Burke, Michael W.↗

Quantifying Main Trends in Lysozyme Nucleation: The Effect of Precipitant Concentration and Impurities

Full factorial experiment design incorporating multi-linear regression analysis of the experimental data allows the main trends and effects to be quickly identified while using only a limited number of experiments. These techniques were used to identify the effect of precipitant concentration and the presence of an impurity, the physiological lysozyme dimer, on the nucleation rate and crystal dimensions of the tetragonal form of chicken egg white lysozyme. Increasing precipitant concentration was found to decrease crystal numbers, the magnitude of this effect also depending on the supersaturation. The presence of the dimer generally increased nucleation. The crystal axial ratio decreased with increasing precipitant concentration independent of impurity.

Burke, Michael W.↗

The Preparation Conditions of Chromium Doped ZnSe and Their Effect on The Infrared Luminescence Properties

We report the investigation by photoluminescence lifetime measurements of the near-IR emissions from a series of chromium-doped ZnSe samples, correlated to their preparation conditions. The samples were polycrystalline or single crystals prepared by post growth diffusion doping or single crystals doped during growth by the Physical Vapor Transport method. Room temperature lifetime values between 6 and 8 microseconds were measured for samples with Cr (2+) concentrations from low 10 (exp 17) to high 10 (exp 18) per cubic centimeter range. Lifetime data taken down to 78 K was found to be rather temperature independent, reconfirming previous reports indicating a quantum yield of the corresponding emission of close to 100% at room temperature. A strong decrease in the room temperature lifetime was found for chromium concentrations higher than 10 (exp 19) per cubic centimeter.

Burger, A.↗

Characterization of a Fabry - Perot - Based electrooptic Modulator

An electrooptic modulator using a thin slice of LiNbO3 within the cavity of a Fabry-Perot interferometer is designed and fabricated. The modulator is operated with 633 nm light from a He-Ne laser. Results related to characterization of this modulator are presented.

Banks, C.↗

Homoepitaxial ZnO Film Growth

ZnO films have high potential for many applications, such as surface acoustic wave filters, UV detectors, and light emitting devices due to its structural, electrical, and optical properties. High quality epitaxial films are required for these applications. The Al2O3 substrate is commonly used for ZnO heteroepitaxial growth. Recently, high quality ZnO single crystals are available for grow homoepitaxial films. Epitaxial ZnO films were grown on the two polar surfaces (O-face and Zn-face) of (0001) ZnO single crystal substrates using off-axis magnetron sputtering deposition. As a comparison, films were also deposited on (0001) Al2O3 substrates. It was found that the two polar ZnO surfaces have different photoluminescence (PL) spectrum, surface structure and morphology, which strongly influence the epitaxial film growth. The morphology and structure of homoepitaxial films grown on the ZnO substrates were different from heteroepitaxial films grown on the Al2O3. An interesting result shows that high temperature annealing of ZnO single crystals will improve the surface structure on the O-face surface rather than the opposite surface. The measurements of PL, low-angle incident x-ray diffraction, and atomic force microscopy of ZnO films indicate that the O-terminated surface is better for ZnO epitaxial film growth.

Zhu, Shen↗

A Novel Approach to Solving the Problem of Needle Microcrystals (A Case Study of Ribosome Crystals)

Different morphology crystals (needle, rod-tetragonal and wedge-shaped) were grown from the same solution of ribosome; furthermore, in the same drop using 10- 15% 2-methyl-2,4pentanediol as a precipitant. The crystals appeared in 5-48 hours. Observations of the kinetics of crystals appearance lead to the conclusion that higher supersaturation of ribosome solution produces needle-shaped crystals, while the tetragonal-rod and the wedge-shaped crystals grow at lower supersaturation. The ribosome packing in the crystals was characterized by electron microscopy (EM). An analysis of EM ultrathin sections indicates that the unit cells, with a high degree of probability, are the same in the crystals of different morphology. The data obtained suggests how to shift the process of crystal formation from the needles to the crystals with comparative size in all three dimensions.

Karpova, Elizaveta A.↗

Inducing Lift on Spherical Particles by Traveling Magnetic Fields

Gravity induced sedimentation of suspensions is a serious drawback to many materials and biotechnology processes, a factor that can, in principle, be overcome by utilizing an opposing Lorentz body force. In this work we demonstrate the utility of employing a traveling magnetic field (TMF) to induce a lifting force on particles dispersed in the fluid. Theoretically, a model has been developed to ascertain the net force, induced by TMF, acting on a spherical body as a function of the fluid medium's electrical conductivity and other parameters. Experimentally, the model is compared to optical observations of particle motion in the presence of TMF.

Mazuruk, Konstantin↗

Imaging Calorimeter for ACCESS Simulations with GEANT/FLUKA

Imaging Calorimeter for ACCESS (ICA) is a candidate of the calorimeter for the NASA's ACCESS program. The ICA studies the origin and acceleration mechanism of cosmic rays by measuring the elemental composition of the cosmic rays in the energy up to 10(exp 16) eV. For the past year, Monte Carlo simulation study for the ICA has been conducted to predict the detector performance and to design the system for match the scientific objectives. Simulation results show that the detector response resembles a Gaussian distribution and the energy resolution with ICA can be achieved about 40%. In addition, simulations of the detector's response to an assumed bent power law spectra in the region where the knee occurs have been conducted and clearly show that this detector can provide sufficiently accurate estimates of the spectral parameters that are a science goal of ACCESS.

Lee, Jeongin↗

Role of Vibration-Induced Streaming in Float-Zone Crystal Growth

This presentation will examine in detail the role of vibration-induced streaming flow in the context of float-zone crystal growth. It is very well known that during float-zone materials processing, the naturally occurring temperature gradients along the zone surface impose a thermocapillary flow in the zone. Under certain processing conditions, the thermocapillary flow can also become nonsteady (oscillatory). The presence of thermocapillary flow is detrimental to crystal quality, for it can promote non-uniform dopant distribution and crystal striations. To null this effect we have imposed a counter streaming flow in the zone, via end-wall vibration. This technique has been adapted to float-zone processing of Sodium Nitrate-Barium Nitrate eutectic alloys, under both steady and nonsteady thermocapillary flow conditions. The beneficial effects of counter streaming flow have been clearly brought out through the before and after comparisons of the crystal microstructure. In addition, we are also examining the theoretical underpinnings of the balancing of thermocapillary flows with vibration-driven counter flows in float-zones.

Anilkumar, A. V.↗

Characterizing the Use of Ultrasonic Energy in Promoting Uniform Microstructural Dispersions in Immiscible Mixtures

Gravity driven separation and preferential wetting precludes uniform microstructural distributions during solidification processing of immiscible, liquid-liquid mixtures. Historically, it is, however, established that liquid/liquid suspensions can be established and maintained by utilizing ultrasound. Following a brief introduction the results of experiments on immiscible mixtures subjected to ultrasonic energy during solidification processing will be compared and evaluated in view of a recently developed mathematical model. The presentation continues by discussion of scaling the model to commercial viability and concludes with the implications of such processing in a microgravity environment.

Grugel, R. N.↗

IMAGE and the Plasmasphere: Model and Data Comparison

The plasmaspheric environment has been measured through in situ spacecraft since the early 1960's. With these early measurements, modeler's began to build plasmasphere models. A feature that appeared in the models that could not be directly confirmed in the measurements is a 'tail' on the dusk side that extends toward the sun. Convection flow has been assumed to give smooth azimuthal densities, except on the dusk side. The EUV images of the plasmasphere from the IMAGE spacecraft give a global picture, and show the 'tail' to be an extended region rather than density enhancements and also show the plasmasphere, particularly the plasmapause, to be much more dynamic than the models or in situ measurements have indicated. We will show some of the unexpected features and give a possible explanation for them.

Gallagher, D. L.↗