Engineering Papers⌕ Search

Engineering topics

Roschli, Alex

Publications and source records attributed to Roschli, Alex.

At least 55 records · Page 3

ORNL Slicer 2 v0.96 BETA

ORNL Slicer 2 v0.96 BETA is the seventh BETA release of the ORNL Slicer 2 software package. It was released on 9/1/2021 to all users of v0.95, currently totaling over 100 users. This technical memo will highlight all of the new features, updates, and bug fixes released in this latest iteration of the ORNL Slicer 2.

97 MATHEMATICS AND COMPUTING↗

Additive manufacturing of power poles using bamboo-polymer composites: A quick solution for power grid restoration

Polymer additive manufacturing (AM) technology is rapidly growing and its transition to become an advanced manufacturing technique now offers possibilities for unconventional applications. One of these potential applications is on site additive manufacturing of power poles. During natural incidents such as storms and hurricanes, power lines can be severely damaged and there may not be sufficient spare power poles to replace. In such situations, additive manufacturing of power poles on site can offer a fast, temporary solution during emergencies. The ability of freeform manufacturing of parts with complex geometries makes large scale AM attractive for various applications; however, due to residual stress build up and need for different mechanical requirements for different applications, reinforcement of the AM feedstock is necessary. In addition to carbon and glass fibers, bio-derived fibers can also be used as a reinforcing phase, both to utilize the natural resources at the emergency area and in terms of long-term sustainability. In this project, design and additive manufacturing of a 13.1 m power pole was demonstrated. Three different feedstock material options (polystyrene, cellulose ester and polycarbonate reinforced with glass and bamboo fibers) and two different pole designs were investigated. As-printed part tensile properties both in printing and interlayer directions were measured and a power pole was printed as six pieces and put together successfully. Finally, a conceptual design of a portable power pole manufacturing approach was proposed.

Tekinalp, Halil↗

Recent developments in filtration media and respirator technology in response to COVID-19

Abstract The COVID-19 pandemic triggered a surge in demand for N95 or equivalent respirators that the global supply chain was unable to satisfy. This shortage in critical equipment has inspired research that addresses the immediate problems and has accelerated the development of the next-generation filtration media and respirators. This article provides a brief review of the most recent work with regard to face respirators and filtration media. We discuss filtration efficiency of the widely utilized cloth masks. Next, the sterilization of and reuse of existing N95 respirators to extend the existing stockpile is discussed. To expand near-term supplies, optimization of current manufacturing methods, such as melt-blown processes and electrospinning, has been explored. Future manufacturing methods have been investigated to address long-term supply shortages. Novel materials with antiviral and sterilizable properties with the ability for multiple reuses have been developed and will contribute to the development of the next generation of longer lasting multi-use N95 respirators. Finally, additively manufactured respirators are reviewed, which enable a rapidly deployable source of reusable respirators that can use any filtration fabric. Graphic abstract

36 MATERIALS SCIENCE↗

Large-scale additive manufacturing of self-heating molds

Large-scale material extrusion additive manufacturing technology is becoming the new mainstream technology for scaled-up composite mold and die applications. This paradigm shift in composite processing technology is primarily driven by out-of-autoclave tooling applications, in which fiber reinforced composite molds with scaled-up sizes and embedded heating elements are attractive. The present research describes the design, manufacturing, and testing of self-heating composite molds fabricated via a large-scale pellet extrusion 3D printing machine with an integrated wire co-extrusion tool. Polycarbonate (PC) composites reinforced with carbon fiber (PC/CF; 20 wt.%) and glass fiber (PC/GF; 20 wt.%) were used to fabricate mold parts. Joule heating thermal test results showed that uniform temperatures (~100 °C) were achieved for both PC/CF and PC/GF mold surfaces, using a custom-made feedback control power supply and infrared thermography. Mechanical characterizations, including tensile and flexural testing were performed on the wire-embedded and un-wired PC/CF and PC/GF base specimens to investigate the impact of the fiber reinforcement as well as the embedded wires. In the direction of extrusion, the ultimate tensile stress of PC/CF was 105 MPa, and that of PC/GF was 73 MPa, while the neat PC value was 64 MPa. Inner-bead voids and interfacial gaps were observed and characterized via optical and scanning electron microscopy. The embedded wires and inner bead impacted the mechanical properties of the composites. Furthermore, the stiffness of the wire-embedded mold was still satisfactory, proving that the technology can be used to fabricate additively manufactured out-of-oven/autoclave molds.

36 MATERIALS SCIENCE↗

Rethinking production of machine tool bases: Polymer additive manufacturing and concrete

Cast iron and steel weldments are the most common machine tool base elements. However, both construction methods have associated disadvantages for domestic machine tool manufacturers. Here, this paper documents the investigation of an alternative method for machine tool base production using concrete to fill an additively manufactured polymer mold, where the motion components are attached to the concrete base after the initial concrete curing. Modal testing results for a three-axis, vertical spindle prototype indicate high damping and stiffness can be achieved using the concrete base construction. Advantages are reduced cost and lead time compared to traditional methods.

Additive manufacturing↗

A Comparative Study of Direct and Indirect Additive Manufacturing Approaches for the Production of a Wind Energy Component

Additive manufacturing (AM) was developed in the 1980s to create three-dimensional prototypes through layer-wise approaches to fabrication. Since then, these approaches have seen improvements in both materials and processing technologies. To date, there are now 7 types of additive manufacturing processes and hundreds of materials, which can be directly printed – going directly from digital design to fabricated components. In this project, Oak Ridge National Laboratory (ORNL), Vestas Wind Systems, and The National Renewable Energy Laboratory (NREL) collaborated to evaluate the effectiveness of state-of-the-art large-scale AM processes in the production of a structural component for use in a wind turbine nacelle, through both direct and indirect manufacturing approaches. Here, experienced AM design engineers detail techniques for AM design, including topology optimization (TO), support minimization, reverse engineering, and techniques for mitigating poor interlaminar performance. Fabrication of the components is presented, including printing parameters and postprocessing, and followed with full-scale component testing by a 3rd party testing laboratory. To evaluate the potential of the developed approaches, a complete techno-economic analysis is provided which evaluates the cost of these techniques given current and near to long-term projections of AM system capabilities.

17 WIND ENERGY↗

Assessment of Commercial Composite Power Pole Performance

The objective of this report is to assess the performance of composite poles, considering price, durability, resilience to the effects of extreme weather, ongoing maintenance costs, ease of repair, preplacement or upgrading giving special consideration to performance in watersheds and flood prone environments. The report starts with a description of the history and functional requirements of power pole. This is followed by a survey of existing composite pole manufacturing processes with a survey of existing knowledge base answering the above performance requirements. For the information not currently available to the public, an overview of testing procedures is outlined. Finally, an overview of emerging trends in composites and potential opportunities to address technical and economic shortfalls is proposed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

ORNL Slicer 2 v0.93 BETA

ORNL Slicer 2 v0.93 BETA is the fourth BETA release of the ORNL Slicer 2 software package. It was released on 3/31/2021 to all users of v0.92, currently totaling over 100 users. This technical memo will highlight all of the new features, updates, and bug fixes released in this latest iteration of the ORNL Slicer 2.

97 MATHEMATICS AND COMPUTING↗

Additively Manufactured Power Poles

The objective of this project was to explore the utility of native grown biomaterials for the portable production of power poles. In this Phase 1 project, activities were broken into two tasks: 1) baseline efforts to show feasibility of printed biomaterial power poles and 2) produce a conceptual design of portable pole production. The results were very promising, showing sufficient mechanical properties from printed biomaterials as well as conceptual designs for, and successful demonstration of, printed power poles.

42 ENGINEERING↗

Construction-Scale Concrete Additive Manufacturing and its Application in Infrastructure Energy Storage

Construction is filled with labor intensive, hazardous, and often wasteful processes. It is also an enormous industry, so improvements in efficiency could have a tremendous economic impact. Construction-scale additive manufacturing is one path toward achieving those improvements. In this paper, a construction-scale additive manufacturing system, called Sky-BAAM, is presented. In addition to possibly leading to more energy-efficient construction practices, leveraging additive manufacturing in construction opens the solution space to more energy efficient building design. One such design, the EMPOWER wall, is also presented in this paper. The exterior of the wall is shaped to maximize heat transfer, while acting as form work for an internal energy-storage system. This allows energy to be stored in the wall during off-peak times and retrieved during peak periods.

Atkins, Celeste↗

Real-Time Defect Correction in Large-Scale Polymer Additive Manufacturing via Thermal Imaging and Laser Profilometer

Defects can result in a failed part and are costly in terms of time and material. This cost is even greater in the context of large-scale additive manufacturing where the objects can be very large. As a result, a great deal of research has focused on defect identification and mitigation. To address defects during object construction, researchers at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility investigated an in-situ control system comprised of two sensors: a thermal camera and laser profilometer. This control system adjusted material flow and build speed to mitigate three types of defects: low layer times, underfill, and overfill. Several test objects were constructed. The control system was found to adjust build parameters to handle low layer times of approximately 15 seconds and height deviations from -100% underfill (the absence of a layer) to 50% overfill. Within two layers, height deviations could be returned to within 10% of the expected layer height. Further, preliminary results suggest the system can compensate for uneven build surfaces.

Borish, Michael↗

Dual Material System for Polymer Large Scale Additive Manufacturing

Big Area Additive Manufacturing (BAAM) technology allows for manufacturing of large-scale objects with a potential to reduce energy embedded in products, reduce or eliminate energy necessary for transportation of goods along with reducing the lead time and cost in some cases. Over the last few years, Oak Ridge National Laboratory (ORNL) has been focusing on large-scale printing of single material systems, typically un-reinforced or short fiber reinforced polymers, in order to address needs in stiffness-limited applications. This paper describes the development of a multi-material large-scale AM system through a collaboration with Cincinnati Inc. and Performance Feed Screw Inc. Modifications to the Big Area Additive Manufacturing (BAAM) system includes a new extruder design to accommodate a dual feed system, an expanded two-dryer system with a capacity of 273 kg/dryer, and a system that is capable of mixing pelletized materials up to 60Kg/hr. This article highlights the advantages and limitations of the multi-material system as well as potential applications.

Smith, Tyler↗

CREATING TOOLPATHS WITHOUT STARTS AND STOPS FOR EXTRUSION-BASED SYSTEMS

Toolpath generation for extrusion-based additive manufacturing systems, called slicing, involves operations on polygonal contours that are derived from an STL file. Slicing generates multiple paths per layer (both closed-loop and open-loop) that are designed to optimally fill the space outlined by the polygon(s). In the course of printing a layer, the extruder must start and stop, the tip must be wiped, and the extruder must travel between paths without printing. Any amount of time the printer spends moving without printing is considered wasted time because the part isn’t being constructed. In addition, the start/stop point, known as the seam, is often a blemish on the surface of the part that contributes to weaker material properties. Therefore, a single path for creating multi-bead walled structures is desirable because it would save machine time and create parts with better surface finish. This paper will cover one method of modifying the CAD file and slicing engine to allow for parts to be printed without starting and stopping the extruder.

Roschli, Alex↗

Wire Co-Extrusion with Big Area Additive Manufacturing

Oak Ridge National Laboratory’s Manufacturing Demonstration Facility is developing a system that will deposit and embed conductive and resistive elements within a printed bead of material. The system was implemented on a Big Area Additive Manufacturing (BAAM) system using a co-extruding nozzle. It has already been demonstrated that BAAM is useful for the tooling industry, but this could be a great improvement on an established application of BAAM parts. This system will provide the ability to control and monitor the surface of additively manufactured (AM) parts. It will also enable self-heating surfaces of AM parts, which is particularly useful in tooling applications. This system could even be used in the future for embedding other materials not found in pellet form in BAAM parts. This work will cover the development of the co-extrusion system and its integration with the dual-port nozzle and the BAAM system.

Atkins, Celeste↗

On-Site Manufacture of Large Cement Structures

ORNL worked with GE Renewable Energy to develop additive manufacturing capabilities that enable the manufacture of large cement structures on-site. This project resulted in the testing and definition of the materials and deposition functions necessary for an on-site additive manufacturing system. Test articles were manufactured using a medium-scale prototype system, and mechanical testing of the samples was performed.

36 MATERIALS SCIENCE↗

MELT POOL MONITORING FOR CONTROL AND DATA ANALYTICS IN LARGE-SCALE METAL ADDITIVE MANUFACTURING

Laser-wire based Directed Energy Deposition (DED) processes are being developed at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility, in collaboration with GKN Aerospace, for large volume metal additive manufacturing of metallic structures. The technology has the potential to deliver reduced costs and lead times when compared to conventional methods of manufacturing in several industries. While complex structures are being produced with relatively high deposition rates and at near-net shape, issues persist with achieving consistent geometric accuracy and thermal stability. A significant research effort is focused on developing coordinated, multi-modal sensing and control for addressing these issues. An introduction to this large-volume metal process will be provided, followed by investigations into real-time thermal monitoring capabilities that support control and data analytics frameworks. Studies focused on melt pool monitoring via infrared thermography, thermal and geometric effects on melt pool size measurement, and interactions between process variables and thermal monitoring metrics are presented.

Gibson, Brian↗

Large-Scale Reactive Extrusion Deposition of Sparse Infill Structures with Solid Perimeters

Large-scale additive manufacturing of reactive polymer systems offers significant improvements over thermoplastics through improved mechanical properties, faster deposition rates, and deposition at ambient temperatures. At ambient temperatures, the resin exists as a viscoelastic liquid which require additional additives for improved rigidity and bead stability. These filler-reinforced resins, or yield stress fluids, are soft solid-like materials able to withstand compressive forces from successive layer deposition until curing leads to bead solidification. When bead deposition is unsupported by previous layers, as is the case when bridging a gap, the creep due to gravitational loading can lead to bead instabilities which result in excessive sagging or bead breakage. These bead instabilities are material dependent and susceptible to changes in filler composition and temperature rises due to exothermic reactions. This work implements a design solution for bridging sparse infill patterns in additively manufactured parts which are essential in the reduction of weight. A series of span tests over a range of distances, as multiples of nozzle diameter, were conducted to determine the critical distance where a bead would break. Additional layer depositions determined the number of layers needed to recover from sagging effects. This recovery was essential in the transition of sparse infill to solid infill printing, where solid infill is milled for a smooth surface finish. Without the capability of sparse-solid transition, additively manufactured parts would require further surface treatments such as spray coating, adding to cost and increasing production time. A standard domed-mold geometry is presented to show the success of this printing process.

Hershey, Christopher↗