Engineering Papers⌕ Search

Engineering topics

Rood, R.

Publications and source records attributed to Rood, R..

Can Assimilation of Satellite Ozone Data Contribute to the Understanding of the Lower Stratospheric Ozone?

We study the quality of lower stratospheric ozone fields from a three- dimensional global ozone assimilation system. Ozone in this region is important for the forcing of climate, but its global distribution is not fully known because of its large temporal and vertical variability. Modeled fields often have biases due to the inaccurate representation of transport processes in this region with strong gradients. Accurate ozonesonde or satellite occultation measurements have very limited coverage. Nadir measurements, such as those from the Solar Backscatter Ultraviolet/2 (SBUV/2) instrument that provide wide latitudinal coverage, lack the vertical resolution needed to represent sharp vertical features. Limb measurements, such as those from the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS), provide a finer vertical resolution. We show that assimilation of MIPAS data in addition to SBUV/2 data leads to better estimates of ozone in comparison with independent high quality satellite, aircraft, and ozone sonde measurements. Other modifications to the statistical analysis that have an impact on the lower stratospheric ozone will be mentioned: error covariance modeling and data selection. Direct and indirect impacts of transport and chemistry models will be discussed. Implications for multi-year analyses and short-tern prediction will be addressed.

Stajner, I.↗

Monitoring and Assimilation of MIPAS and SCIAMACHY Ozone Data

Preliminary results are presented from experiments that integrate ozone observations from two ENVISAT-borne instruments with the ozone data assimilation system developed at NASA's Data Assimilation Office (DAO). The data used are ozone total column provided by the Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY) and stratospheric profiles from the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) instrument. The DAO's existing system sequentially assimilates the Solar Backscatter Ultraviolet/2 total and partial ozone column data. Incorporation of SCIAMACHY and MIPAS data is done in two stages. First, the observations are monitored. The monitoring consists of computing the differences between Envisat observations and the ozone system forecast, i.e. observed-minus-forecast (O-F) residuals. The O-F residuals are then analyzed using simple statistical methods to examine the spatial distribution of differences, which are large for SCIAMACHY near the terminator. In the second stage, the MIPAS data will be actively assimilated along with the SBW/2 observations; any preliminary results of note will be discussed.

Wargan, K.↗

Assimilation of Satellite Ozone Observations

This talk will discuss assimilation of ozone data from satellite-borne instruments. Satellite observations of ozone total columns and profiles have been measured by a series of Total Ozone Mapping Spectrometer (TOMS), Solar Backscatter Ultraviolet (SBUV) instruments, and more recently by the Global Ozone Monitoring Experiment. Additional profile data are provided by instruments on NASA's Upper Atmosphere Research Satellite and by occultation instruments on other platforms. Instruments on Envisat' and future EOS Aura satellite will supply even more comprehensive data about the ozone distribution. Satellite data contain a wealth of information, but they do not provide synoptic global maps of ozone fields. These maps can be obtained through assimilation of satellite data into global chemistry and transport models. In the ozone system at NASA's Data Assimilation Office (DAO) any combination of TOMS, SBUV, and Microwave Limb sounder (MLS) data can be assimilated. We found that the addition of MLS to SBUV and TOMS data in the system helps to constrain the ozone distribution, especially in the polar night region and in the tropics. The assimilated ozone distribution in the troposphere and lower stratosphere is sensitive also to finer changes in the SBUV and TOMS data selection and to changes in error covariance models. All results are established by comparisons of assimilated ozone with independent profiles from ozone sondes and occultation instruments.

Stajner, I.↗

Monitoring of MLS Measurements for Ozone Data Assimilation

The ozone data assimilation system at the NASA Goddard Space Flight Center Data Assimilation Office (DAO) has operationally provided near real time global three dimensional analyzed ozone fields since December 1999. Presently, 4 system assimilates both total column ozone and profile measurements from the NOAA - 16 SBUV/2 instrument into an off-line transport model using a physical space statistical analysis scheme (PS AS). Recently, this system was modified to investigate a possible impact from including MLS profile observations. Over a period from December 13, 1991 to March 1, 1992 the system assimilated both NOAA 11 SBUV/2 profile measurements and TOMS total column measurements. Short term ozone forecasts were produced and compared to MLS observations. The resulting observed -minus -forecast (O-F) residuals were studied regionally (by both latitude bands and pressure levels) in order to explore the potential impact of MLS observations on the assimilation and sensitivity to the UARS yaw maneuver and other instrument and algorithm characteristics. In addition, MLS profiles were compared to nearest neighbor SBUV and analysis profiles. In the tropics, analyzed ozone values tend to be too high from 1-3 hPa and too low from 10-20 hPa. MLS measurements in these regions tend be lower and higher (respectively) than forecast ozone values. This indicates that assimilating MLS measurements may improve, analysis results in these areas. Further, nearest neighbor profile comparisons in the southern high latitudes indicate that laminar features present in the analysis but not present in SBUV measurements, are also present in MLS measurements. This, together with the availability of MLS measurements in polar night regions indicates that assimilating MLS measurements in polar night regions indicates that assimilating MLS measurements may improve analyzed ozone values in high latitudes.

Winslow, Nathan↗

The Tropical Upper Troposphere and Lower Stratosphere in the GEOS-2 GCM

The structure of the tropical upper troposphere and lower stratosphere in the GEOS-2 General Circulation Model (GCM) is discussed. The emphasis of this study is on the reality of monthly-mean temperature and water vapor distributions in the model, compared to reasonable observational estimates. It is shown that although the zonal-mean temperature is in good agreement with observations, the GCM supports an excessive zonal asymmetry near the tropopause compared to the ECMWF Reanalyses. In reality there is a QBO-related variability in the zonally averaged lower stratospheric temperature which is not captured by the model. The observed upper tropospheric temperature and humidity fields show variations related to those in the sea surface temperature, which are not incorporated in the GCM; nevertheless, there is some interannual variability in the GCM, indicating a component arising from internal processes. The model is too moist in the middle troposphere (500 hPa) but too dry in the upper troposphere, suggesting that there is too little vertical transport or too much drying in the GCM. Transport into the stratosphere shows a pronounced annual cycle, with drier air entering the tropical stratosphere when the tropopause is coldest in northern winter; while the alternating dry and moist air masses can be traced ascending through the tropical lower stratosphere, the progression of the anomalies is too rapid.

Pawson, S.↗

Replicate Wolter-I x-ray mirrors

Cylindrical (hyperbolic - parabolic Wolter I) mirrors have been electroformed from nickel over an electroless nickel-phosphorous (NiP) plated aluminum mandrel in support of the NASA AXAF-S x-ray spectrometer program. The electroless nickel was diamond turned and polished to achieve a surface finish of 10 angstroms rms or better. Gold was then plated on the nickel alloy after an electrochemical passivation step. Next a heavy layer of pure nickel was plated one millimeter thick with controlled stress at zero using a commercial PID program to form the actual mirror. This shell was removed from the NiP alloy coated mandrel by cryogenic cooling and contraction of the aluminum to release the mirror. It is required that the gold not adhere well to the NiP but all other plated coatings must exhibit good adherence. Four mirrors were fabricated from two mandrels prepared by this method. The area of each part is 0.7 square meters (7.5 square feet).

Engelhaupt, D. E.↗

A 3D simulation of the early winter distribution of reactive chlorine in the north polar vortex

Early in December 1991, high values of ClO are seen by the Microwave Limb Sounder (MLS) on the Upper Atmosphere Research Satellite at latitudes south of areas of temperatures cold enough to form polar stratospheric clouds (PSCs). A 3D simulation shows that the heterogeneous conversion of chlorine reservoirs to reactive chlorine on the surfaces of PSCs (processing) takes place at high latitudes. Often the processed air must be transported to lower latitudes, where the reactive chlorine is photochemically converted to ClO, to be observed by MLS. In this simulation, one incidence of cold temperatures is associated with an anticyclone, and a second with a cyclone. The transport of processed air associated with the anticyclone is marked by shearing; a decrease in the maximum of the processed air is accompanied by growth of the area influenced by the processing. In contrast, the air processed in the cyclonic event spreads more slowly. This shows that transport and shearing is a crucial element to the evolution of reactive chlorine associated with a processing event. In particular, transport and shearing, as well as photochemical processes, can cause variations in observed ClO.

Douglass, A.↗