Engineering Papers⌕ Search

Engineering topics

Ronning, Filip

Publications and source records attributed to Ronning, Filip.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Derivation of low-energy Hamiltonians for heavy-fermion materials

Here, by utilizing a multiorbital periodic Anderson model with parameters obtained from ab initio band structure calculations, combined with degenerate perturbation theory, we derive effective Kondo-Heisenberg and spin Hamiltonians that capture the interaction among the effective magnetic moments. This derivation encompasses fluctuations via both nonmagnetic 4⁢𝑓 0 and magnetic 4⁢𝑓 2 virtual states, and its accuracy is confirmed through comparison with experimental data obtained from CeIn 3 . The significant agreement observed between experimental results and theoretical predictions underscores the potential of deriving minimal models from first-principles calculations for achieving a quantitative description of 4⁢𝑓 materials. Moreover, our microscopic derivation unveils the underlying origin of anisotropy in the exchange interaction between Kramers doublets, shedding light on the conditions under which this anisotropy may be weak compared to the isotropic contribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Anisotropic hybridization in CeRhSn

The optical conductivity σ⁡(ω, T) of CeRhSn was studied by broadband infrared spectroscopy. Temperature-dependent spectral weight transfer occurs over high energy (0.8 eV) and temperature (~500 K) scales, classifying CeRhSn as a mixed-valent compound. The optical conductivity reveals a substantial anisotropy in the electronic structure. Renormalization of σ⁡(ω, T) occurs as a function of temperature to a coherent Kondo state with concomitant effective mass generation. Associated spectroscopic signatures were reproduced remarkably well by the combination of density functional theory and dynamical mean-field theory using a momentum-independent self-energy. The theory shows that the anisotropy for energies > 10 meV is mainly driven by the bare three-dimensional electronic structure that is renormalized by local electronic correlations. The possible influence of magnetic frustration and quantum criticality is restricted to lower energies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Excess heat capacity in magnetically ordered Ce heavy-fermion metals

Herein we study the magnetic heat capacity of a series of magnetically ordered Ce-based heavy-fermion materials, which show an anomalous T 3 heat capacity in excess of the phonon contribution in many materials. For compounds for which magnon models have been worked out, we show that the local-moment magnon heat capacity derived from the measured magnon spectra underestimates the experimental specific heat. The excess heat capacity reveals increasing density of states with increasing energy, akin to a pseudogap. We show that this anomalous temperature-dependent term is not associated with proximity to a quantum critical point, but is strongly correlated with T N , indicating the anomalous excitations are governed by the magnetic exchange interaction. This insight may hold key information for understanding magnetically ordered heavy fermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Probing quantum criticality in ferromagnetic CeRh 6 Ge 4

CeRh 6 Ge 4 is unusual in that its ferromagnetic transition can be suppressed continuously to zero temperature, i.e., to a ferromagnetic quantum-critical point (QCP), through the application of modest hydrostatic pressure. This discovery has raised the possibility that the ferromagnetic QCP may be of the Kondo-breakdown type characterized by a jump in Fermi volume, to which thermopower S measurements should be sensitive. Further, though S/T changes both sign and magnitude around the critical pressure P c ≈ 0.8 GPa, these changes are not abrupt but extend over a pressure interval from within the ferromagnetic state up to P c . Together with temperature and pressure variations in electrical resistivity and previously reported heat capacity, thermopower results point to the near coincidence of two sequential effects near P c , delocalization of 4f degrees of freedom through orbital-selective hybridization followed by quantum criticality of itinerant ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Light-driven nanoscale vectorial currents

Controlled charge flows are fundamental to many areas of science and technology, serving as carriers of energy and information, as probes of material properties and dynamics and as a means of revealing or even inducing broken symmetries. Emerging methods for light-based current control offer particularly promising routes beyond the speed and adaptability limitations of conventional voltage-driven systems. However, optical generation and manipulation of currents at nanometre spatial scales remains a basic challenge and a crucial step towards scalable optoelectronic systems for microelectronics and information science. Here we introduce vectorial optoelectronic metasurfaces in which ultrafast light pulses induce local directional charge flows around symmetry-broken plasmonic nanostructures, with tunable responses and arbitrary patterning down to subdiffractive nanometre scales. Local symmetries and vectorial currents are revealed by polarization-dependent and wavelength-sensitive electrical readout and terahertz (THz) emission, whereas spatially tailored global currents are demonstrated in the direct generation of elusive broadband THz vector beams 17 . We show that, in graphene, a detailed interplay between electrodynamic, thermodynamic and hydrodynamic degrees of freedom gives rise to rapidly evolving nanoscale driving forces and charge flows under the extremely spatially and temporally localized excitation. These results set the stage for versatile patterning and optical control over nanoscale currents in materials diagnostics, THz spectroscopies, nanomagnetism and ultrafast information processing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Two-Stage Cryogenic HEMT-Based Amplifier for Low-Temperature Detectors

To search for dark matter candidates with masses below $\mathcal{O}$ (MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is developing novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1–100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogenic HEMT-based amplifier with an estimated charge resolution approaching the single-electron level. A low-capacitance (~ 1.6 pF) HEMT is used as a buffer stage at T = 10 mK to mitigate effects of stray capacitance at the input. The buffered signal is then amplified by a higher-capacitance (~ 200 pF) HEMT amplifier stage at T = 4 K. Importantly, the design of this amplifier makes it usable with any insulating material—allowing for rapid prototyping of a variety of novel detector materials. Here, we present the two-stage cryogenic amplifier design, preliminary voltage noise performance, and estimated charge resolution of 7.2 electrons.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Microscopic Imaging Homogeneous and Single Phase Superfluid Density in $\mathrm{UTe_2}$

Odd-parity superconductor $\mathrm{UTe_2}$ shows spontaneous time-reversal symmetry breaking and multiple superconducting phases, which imply chiral superconductivity, but only in a subset of samples. Here, we microscopically observe a homogeneous superfluid density $n_s$ on the surface of $\mathrm{UTe_2}$ and an enhanced superconducting transition temperature near the edges. We also detect vortex-antivortex pairs even at zero magnetic field, indicating the existence of a hidden internal field. The temperature dependence of $n_s$, determined independent of sample geometry, does not support point nodes along the $b$ axis for a quasi-2D Fermi surface and provides no evidence for multiple phase transitions in $\mathrm{UTe_2}$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

One-dimensionality signature in optical conductivity of heavy-fermion CeIr 3 B 2

In low dimensions, the combined effects of interactions and quantum fluctuations can lead to dramatically new physics distinct from that existing in higher dimensions. Here, we investigate the electronic and optical properties of CeIr 3 ⁢B 2 , a quasione-dimensional (1D) Kondo lattice system, using ab initio calculations. The Ce atoms in the hexagonal crystal structure form 1D chains along the c axis, with extremely short Ce-Ce distances. The quasi-1D nature of the crystal structure is well reflected in its electronic structure. Extremely flat bands emerge within the ab plane of the Brillouin zone, yielding sharp optical transitions in the corresponding optical conductivity. Further, our calculations indicate that these prominent peaks in the optical conductivity provide a clear signature of quasi-1D heavy fermion systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Reply to: Low-frequency quantum oscillations in LaRhIn 5 : Dirac point or nodal line?

We thank G.P. Mikitik and Yu.V. Sharlai for contributing this note and the cordial exchange about it. First and foremost, we note that the aim of our paper is to report a methodology to diagnose topological (semi)metals using magnetic quantum oscillations. Thus far, such diagnosis has been based on the phase offset of quantum oscillations, which is extracted from a “Landau fan plot”. A thorough analysis of the Onsager–Lifshitz–Roth quantization rules has shown that the famous π-phase shift can equally well arise from orbital or spin magnetic moments in topologically trivial systems with strong spin-orbit coupling or small effective masses. Therefore, the “Landau fan plot” does not by itself constitute a proof of a topologically nontrivial Fermi surface. In the paper at hand, we report an improved analysis method that exploits the strong energy dependence of the effective mass in linearly dispersing bands. This leads to a characteristic temperature dependence of the oscillation frequency which is a strong indicator of nontrivial topology, even for multi-band metals with complex Fermi surfaces. Three materials, Cd 3 As 2 , Bi 2 O 2 Se and LaRhIn5 served as test cases for this method. Linear band dispersions were detected for Cd 3 As 2 , as well as the F ≈ 7 T pocket in LaRhIn 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Superconductivity by alloying the topological insulator SnBi 2 Te 4

Alloying indium into the topological insulator SnBi 2 Te 4 induces bulk superconductivity with critical temperatures T c up to 1.85 K and upper critical fields up to about 14 kOe. This is confirmed by electrical resistivity, heat capacity, and magnetic susceptibility measurements. The heat capacity shows a discontinuity at T c and temperature dependence below T c consistent with weak coupling BCS theory, and suggests a superconducting gap near 0.25 meV. The superconductivity is type-II and the topological surface states have been verified by photoemission. Here, a simple picture suggests analogies with the isostructural magnetic topological insulator MnBi 2 Te 4 , in which a natural heterostructure hosts complementary properties on different sublattices, and motivates new interest in this large family of compounds. The existence of both topological surface states and superconductivity in Sn 1-x In x Bi 2 Te 4 identifies these materials as promising candidates for the study of topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Interwoven atypical quantum states in CeLiBi 2

Here we report the discovery of CeLiBi 2 , the first example of a material in the tetragonal CeTX 2 ( T = transition metal; X = pnictogen) family wherein an alkali cation replaces the typical transition metal. Magnetic susceptibility and neutron powder diffraction measurements are consistent with a crystal-field Γ 6 ground-state Kramers doublet that orders antiferromagnetically below T N = 3.4 K with an incommensurate propagation wave vector k = ( 0, 0.0724(4), 0.5) that generates a nanometric modulation of the magnetic structure. The best model of the ordered state is an elliptical cycloid with Ce moments primarily residing in the ab plane. This is highly unusual, as all other Γ 6 CeTX 2 members order ferromagnetically. Further, we observe an atypical hard-axis metamagnetic transition at 2 T in magnetostriction, magnetization, and resistivity measurements. CeLiBi 2 is a rare example of a highly conductive material with dominant skew scattering leading to a large anomalous Hall effect. Quantum oscillations with five frequencies arise in magnetostriction and magnetic susceptibility data to T = 30 K and μ 0 H = 55 T, which indicate small Fermi pockets of light carriers with effective masses as low as 0.07 m e . Density functional theory calculations indicate that square-net Dirac-like Bi-p bands are responsible for these ultralight carriers. Together, our results show that CeLiBi 2 enables multiple atypical magnetic and electronic properties in a single clean material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ground state of Ce 3 Bi 4 Pd 3 unraveled by hydrostatic pressure

Noncentrosymmetric Ce 3 Bi 4 Pd 3 has attracted a lot of attention as a candidate for strongly correlated topological material, yet its experimental ground state remains a matter of contention. Two conflicting scenarios have emerged from a comparison to the prototypical Kondo insulator Ce 3 Bi 4 Pd 3 : Either Ce 3 Bi 4 Pd 3 is a spin-orbit-driven topological semimetal or a Kondo insulator with smaller Kondo coupling than its Pt counterpart. Here, we determine the ground state of Ce 3 Bi 4 Pd 3 via electrical resistivity measurements under hydrostatic pressure, which is a clean symmetry-preserving tuning parameter that increases hybridization but virtually preserves spin-orbit coupling. Ce 3 Bi 4 Pd 3 becomes more insulating under pressures up to 2.3 GPa, which is a signature of Ce-based Kondo insulating materials in the considered pressure range. Its small zero-pressure gap increases quadratically with pressure, similar to the behavior observed in the series Ce 3 Bi 4 (Pt 1 - x Pd x ) 3 , which indicates that Pt substitution and applied pressure have a similar effect. Finally, our result not only demonstrates that Kondo coupling, rather than spin-orbit coupling, is the main tuning parameter in this class of materials, but it also establishes that Ce 3 Bi 4 Pd 3 has a narrow-gap Kondo insulating ground state.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anisotropic magnetotransport properties of the heavy-fermion superconductor CeRh 2 As 2

Here, we report anisotropic resistivity measurements of the heavy-fermion superconductor CeRh 2 As 2 in magnetic fields up to 16 T and temperatures down to 0.35 K. The measured CeRh 2 As 2 resistivity shows a signature corresponding to the suggested quadrupole-density-wave order state at T 0 ~0.5 K for both measured directions. For a magnetic field applied along the tetragonal a axis, T 0 is enhanced with magnetic field reaching ~1.75 K at 16 T. Further, a magnetic field-induced transition occurs at μ 0 H m ~ 8.1 T corresponding to a change to a new broken symmetry state. For a magnetic field applied along the c axis, T 0 is suppressed below our base temperature ~0.35 K by μ 0 H ~ 4.5 T, a field close to the previously reported field-induced transition within the superconducting state suggested to be from an even-parity to an odd-parity state. Our results indicate that the multiple superconducting phases in CeRh 2 As 2 are intimately tied to the suppression of the proposed quadrupole-density-wave phase at T 0 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Physical properties of the layered $\mathcal{f}$-electron van der Waals magnet Ce 2 Te 5

Here. we report a detailed study of the magnetic, transport, and thermodynamic properties of Ce 2 Te 5 single crystals, a layered $\mathcal{f}$-electron van der Waals magnet. Four consecutive transitions at ~5.2, 2.1, 0.9, and 0.4 K were observed in the ac-plane electrical resistivity $\rho(T)$, which were further confirmed in specific heat $C_\text{p}(T)$ measurements. Analysis of the magnetic susceptibility $\chi(T)$, the magnetic-field variation of $\rho(T)$, and the increase of the first transition temperature ($T_c$ ~ 5.2 K) with applied magnetic field indicates ferromagnetic order, while the decrease of the other transitions with field suggests different states with dominant antiferromagnetic interactions below $T_2$ ~ 2.1 K, $T_3$ ~ 0.9 K, and $T_4$ = 0.4 K. Critical behavior analysis around Tc that gives critical exponents $\beta$ = 0.31(2), $\gamma$ = 0.99(2), $\delta$ = 4.46(1), and $T_c$ = 5.32(1) K indicates that Ce 2 Te 5 shows a three-dimensional magnetic critical behavior. Moreover, the Hall resistivity ρxy indicates that Ce2Te5 is a multiband system with a relatively high electron mobility ~2900 cm 2 V –1 s –1 near $T_c$, providing further opportunities for future device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermodynamic and electrical transport properties of UTe 2 under uniaxial stress

Despite intense experimental efforts, the nature of the unconventional superconducting order parameter of UTe 2 remains elusive. This puzzle stems from reports of either a single or a double superconducting transition at ambient pressure as well as a complex pressure-temperature phase diagram. To address this issue, we measured the heat capacity and electrical resistivity of UTe 2 under compressive uniaxial stress σ applied along different crystallographic directions. We find that the critical temperature T c of the single observed bulk superconducting transition decreases with σ along [100] and [110] but increases with σ along [001]. Aside from its effect on T c , c-axis stress leads to a significant piezoresistivity. Importantly, an in-plane shear stress σ xy does not induce any observable splitting of the superconducting transition over a stress range of σ xy ≈ 0.17GPa. Furthermore, this result suggests that the superconducting order parameter of UTe 2 may be single component at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Colossal piezoresistance in narrow-gap Eu 5 In 2 Sb 6

Piezoresistance, the change of the electrical resistance (R) of a material in response to an applied mechanical stress (σ), is the driving principle of electromechanical devices such as strain gauges, accelerometers, and cantilever force sensors. Enhanced piezoresistance has been traditionally observed in two classes of uncorrelated materials: nonmagnetic semiconductors and composite structures. In this study, we report the discovery of a remarkably large piezoresistance in Eu 5 In 2 Sb 6 single crystals, wherein anisotropic metallic clusters naturally form within a semiconducting matrix due to electronic interactions. Eu 5 In 2 Sb 6 shows a highly anisotropic piezoresistance, and uniaxial pressure along [001] of only 0.4 GPa leads to a resistivity drop of >99.95%, which results in a colossal piezoresistance factor of 5000×10 –11 Pa –1 . Our result not only reveals the role of interactions and phase separation in the realization of colossal piezoresistance, but it also highlights a route to multifunctional devices with large responses to both pressure and magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗