Engineering Papers⌕ Search

Engineering topics

Romps, David

Publications and source records attributed to Romps, David.

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Stereo Camera Deployment in Support of TRACER (Field Campaign Report)

An improved understanding of the salient environmental controls on cloud formation, evolution, and eventual dissipation is critical to address ongoing challenges with cloud process and parameterization representations in global climate and Earth system models. One goal for the recent U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Tracking Aerosol Convection Interactions Experiment (TRACER) campaign was to collect a comprehensive data set that enabled such convective cloud process studies and key demonstrations for those controls that influenced cloud life cycle (i.e., aerosols, thermodynamics) in the Houston, Texas region. To help accomplish this, ARM instrumentation during TRACER was tasked with tracking a large number of individual, isolated convective cells – and to follow the evolution of these cells at high spatiotemporal resolution to characterize changes in cloud dynamic and microphysical properties. Since Houston experiences a range of convective clouds, it was known that the standard ARM Mobile Facility (AMF) instruments may not be sufficient to completely document initiating, transient, or dissipating low- or shallow-cloud behaviors that were also expected during this campaign (in terms of sensitivity, resolution, and/or operational availability). As one partial solution, a supplemental stereo camera deployment (this sub-campaign) was requested to augment the ARM AMF instrumentation to better address shallow and shallow-to-deep transitional types of cloud process drivers during TRACER (ARM stereo cameras for clouds [STEREOCAM]; Romps and Öktem 2018). The primary scientific focus was the relationships between cloud properties and the ambient conditions, which points to several key TRACER science questions including: ‘What is the relationship between cloud size or updraft intensity to the environmental wind shear and/or humidity?’ Overall, the ARM TRACER stereo camera deployment demonstrated unique effectiveness in observing a wide range of critical shallow, congestus, and transitioning or time-evolving cloud characteristics. The data sets from these cameras include information on the clouds' horizontal dimensions, elevations, and depths, while also enabling potential products for cloud initiation and dissipation rates, and vertical velocities. Stereo cameras simultaneously inform on cloud life cycle stage and spatial properties such as cloud fractional coverage, which should provide complementary information for ARM users when combined with TRACER cloud radars, lidar, and/or other profiling sensors. Moreover, camera products offer large-eddy simulation (LES),-scale-appropriate cloud coverage, depth, and spatial variability estimates, while opening additional avenues to challenge difficult process questions on cloud updrafts/entrainment and their covariability with environmental controls such as wind shear and humidity.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Amazon windthrow disturbances are likely to increase with storm frequency under global warming: Data and Codes

This zipfile includes datasets and codes that were used to produce the results in the paper entitled Amazon windthrow disturbances are likely to increase with storm frequency under global warming. Datasets include: 1. Windthrow density across the entire Amazon - GIS shapefile format 2. Current ERA 5 mean afternoon convective available potential energy (CAPE) (1990-2019) - Remote Sensing TIFF format 3. Estimated future mean CAPE from 10 models in CMIP 6 (2070-2099) - Remote Sensing TIFF format 4. Python codes in jupyter notebook and processed datasets used to generate Fig.2a and Table 1 in the paper. You will need to use Jupyter Notebook and Python for accessing and reading the codes. Please contact Yanlei Feng (ylfeng@berkeley.edu) for any questions. Paper associated with this dataset: Feng, Y., Negrón-Juárez, R.I., Romps, D.M. and Chambers, J.Q., 2023. Amazon windthrow disturbances are likely to increase with storm frequency under global warming. Nature communications, 14(1), p.101.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Cloud, Aerosol, and Complex Terrain Interactions (CACTI) Field Campaign Report

General circulation models and downscaled regional models exhibit persistent biases in deep convective initiation location and timing, cloud top height, stratiform area and precipitation fraction, and anvil coverage (e.g., Del Genio 2012, Del Genio et al. 2012, Hohenegger and Stevens 2013, Song et al. 2013). Despite important impacts on the distribution of atmospheric heating, moistening, momentum, and precipitation (e.g., Hartmann et al. 1984, Fritsch et al. 1986, Houze 1989, 2004, Donner et al. 2001, Del Genio and Kovari 2002, Schumacher et al. 2004, Nesbitt et al. 2006, Storelvmo 2012), nearly all climate models fail to represent mesoscale convective organization (Del Genio 2012), while system evolution is not represented at all (Ovchinnikov et al. 2006). Recent advances in cumulus parameterization coupled with increasing model resolution have improved predictions, but even relatively higher-resolution models without parameterized deep convection have some persistent kinematic and microphysical biases (e.g., Blossey et al. 2007, Matsui et al. 2009, Luo et al. 2010, Lang et al. 2011, Varble et al. 2011, Fridlind et al. 2012, Hagos et al. 2014, Varble et al. 2014a-b, Fan et al. 2017, Stanford et al. 2017, Han et al. 2019). To improve representation of convective systems in models requires adequate characterization of their predictability as a function of environmental conditions. Because of the significant sensitivities of deep convective initiation, intensity, lifetime, propagation, and mesoscale convective organization to many factors including multi-scale atmospheric circulations, ambient environmental stability, humidity, wind distributions, and cloud microphysical processes, this characterization relies on comprehensively observing many cases of convective initiation, non-initiation, organization, and non-organization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Point Cloud of Cloud Points PCCP from CACTI Stereo Cameras

The Point Cloud of Cloud Points (PCCP) data set is composed of 3D coordinates describing the position of cloud features and images from which these coordinates are reconstructed. Images are captured in the daytime by two ARM cloud digital cameras (ACDCs) at CACTI S4a and S4b sites, at 20-second intervals. The two cameras are located at 32.1274oS,64.7139oW, and 32.1185oS, 64.7237oW. The 3D positions are detected with respect to the AMF base location at 32.1264oS, 64.7284oW, and 1141 m above sea level. The PCCP data format is the same as explained in PCCP VAP Technical Report.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Cloud, Aerosol, and Complex Terrain Interactions (CACTI) Science Plan

General circulation models and downscaled regional models exhibit persistent biases in deep convective initiation location and timing, cloud top height, stratiform area and precipitation fraction, and anvil coverage. Despite important impacts on the distribution of atmospheric heating, moistening, and momentum, nearly all climate models fail to represent convective organization, while system evolution is not represented at all. Improving representation of convective systems in models requires characterization of their predictability as a function of environmental conditions, and this characterization depends on observing many cases of convective initiation, non-initiation, organization, and non-organization. The Cloud, Aerosol, and Complex Terrain Interactions (CACTI) experiment in the Sierras de Córdoba mountain range of north-central Argentina is designed to improve understanding of cloud life cycle and organization in relation to environmental conditions so that cumulus, microphysics, and aerosol parameterizations in multiscale models can be improved. The Sierras de Córdoba range has a high frequency of orographic boundary-layer clouds, many reaching congestus depths, many initiating into deep convection, and some organizing into mesoscale systems uniquely observable from a single fixed site. Some systems even grow upscale to become among the deepest, largest, and longest-lived in the world. These systems likely contribute to an observed regional trend of increasing extreme rainfall, and poor prediction of them likely contributes to a warm, dry bias in climate models downstream of the Sierras de Córdoba range in a key agricultural region. Many environmental factors influence the convective life cycle in this region, including orographic, low-level jet, and frontal circulations, surface fluxes, synoptic vertical motions influenced by the Andes, cloud detrainment, and aerosol properties. Local and long-range transport of smoke resulting from biomass burning as well as blowing dust are common in the austral spring, while changes in land surface properties as the wet season progresses impact surface fluxes and boundary-layer evolution on daily and seasonal time scales that feed back to cloud and rainfall generation. This range of environmental conditions and cloud properties coupled with a high frequency of events makes this an ideal location for improving our understanding of cloud-environment interactions. The following primary science questions will be addressed through coordinated first U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF1), mobile C-band Scanning ARM Precipitation Radar (C-SAPR2), ARM Aerial Facility (AAF) Gulfstream-1 (G-1), and guest instrument observations: How are the properties and life cycles of orographically generated cumulus humulis, mediocris, and congestus clouds affected by environmental kinematics, thermodynamics, aerosols, and surface properties? How do these cloud types alter these environmental conditions? How do environmental kinematics, thermodynamics, and aerosols impact deep convective initiation, upscale growth, and mesoscale organization? How are soil moisture, surface fluxes, and aerosol properties altered by deep convective precipitation events and seasonal accumulation of precipitation? This multi-faceted experiment involves a long-term 7-month extended operational period (EOP, 1 October, 2018–30 April, 2019) as well as a 1.5-month intensive operational period (IOP, 30 October–13 December) that will include G-1 observations coinciding with the international multi-agency Remote Sensing of Electrification, Lightning, and Meso-scale/Micro-scale Processes with Adaptive Ground Observations (RELAMPAGO) field campaign.

Convection, Andes, Argentina, cloud life cycle, cl↗
DOE OSTI2018

Southern Great Plains (SGP) Three-Dimensional Observations of Fair-Weather Cumuli Field Campaign Report

The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility Southern Great Plains (SGP) Three-Dimensional (3D) Observations of Fair-Weather Cumuli (SGP3DOBS) experiment employed scanning Doppler lidar and the recently installed stereo camera ring to conduct a one-month intensive operational period (IOP) of fair-weather cumuli in a 3D domain at the ARM SGP Central Facility (CF). The SGP3DOBS is part of the Climate Model Development and Validation (CMDV) “Coupling Mechanistically the Convective Motions and Cloud Macrophysics in a Climate Model” (CM4) project and provides advanced observational analyses for improving physical understanding of shallow cumulus and supporting model parameterization evaluation. For the CM4 project, cloud macroscale and dynamical properties are determined using vertically pointing active remote-sensing measurements (e.g., lidar and radar), which provide a 2D view of fair-weather cumuli (FWC). It is critical to evaluate how well the 2D observations represent 3D cloud fields. The objectives of SGP3DOBS include: 1) evaluate the 3D gridded cloud field from stereo photogrammetry with scanning Doppler lidar measurements; 2) retrieve sub-cloud-layer turbulence (vertical velocity and mass flux) in a 3D domain; 3) estimate shallow cumulus lateral entrainment rate and its relation to environment conditions. The SGP3DOBS IOP was held at the SGP Central Facility from August 31 to September 30, 2017, as the fair-weather nonprecipitating shallow cumuli are prevalent during summertime over land (Lamer and Kollias, 2015). A weather forecast team conducted a short-range forecast of weather conditions in the early morning each day to determine whether it was favorable for FWC. For each IOP day, the Doppler lidar at the SGP Central Facility ran under the range height indicator (RHI) scanning mode in the cross-wind direction. Occasionally, plan position indicator (PPI) scanning mode was run for updated wind directions. During each RHI scanning, the Doppler lidar run continuously between 30- and 150-degree elevation angles. The scanning rate was approximately 10 degree/s, corresponding to a transverse resolution of 111 m at 2 km of a typical FWC height. The newly established three pairs of stereo cameras ran concurrently during the IOP.

Southern Great Plains, Doppler lidar, fair-weather↗
DOE OSTI2018

Clouds Optically Gridded by Stereo COGS product

COGS product is a 4D grid of cloudiness covering a 6 km × 6 km × 6 km cube centered at the central facility of SGP site at a spatial resolution of 50 meters and a temporal resolution of 20 seconds. The dimensions are X, Y, Z, and time, where X,Y, Z, correspond to east-west, north-south, and altitude of the grid point, respectively. COGS takes on values 0, 1, and -1 denoting "cloud", "no cloud", and "not available".

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Layered Atlantic Smoke Interactions with Clouds (LASIC) Field Campaign Report

Southern Africa is the world’s largest emitter of biomass burning aerosols. Their westward transport over the remote southeast Atlantic Ocean co-locates some of the largest atmospheric loadings of absorbing aerosol with the least examined of the Earth’s major subtropical stratocumulus decks. Global aerosol model results highlight that the largest positive top-of-atmosphere (TOA) forcing in the world occurs in the southeast Atlantic, but this region exhibits large differences in magnitude and sign between reputable models, in part because of high variability in the underlying model cloud distributions. Many uncertainties contribute to the highly variable model radiation fields: the aging of the shortwave-absorbing aerosol during transport, how much of the aerosol mixes into the cloudy boundary layer, and how the low clouds adjust to smoke-radiation and smoke-cloud interactions. In addition, the ability of the biomass burning aerosol to absorb shortwave radiation is known to vary seasonally as the fuel type on land changes. LASIC (Layered Atlantic Smoke Interactions with Clouds) is a strategy to improve our understanding of aged carbonaceous aerosol, its seasonal evolution, and the mechanisms by which clouds adjust to the presence of the aerosol. The observational strategy centers on deploying the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility first ARM Mobile Facility (AMF1) cloud, aerosol, and atmospheric profiling instrumentation to Ascension Island, located within the trade-wind shallow cumulus regime (14.50W, 80S) 3000 km offshore of continental Africa. The location is within the latitude zone of the maximum outflow of aerosol, with the deepening boundary layer known to entrain free-tropospheric smoke. The primary activities for LASIC are: 1) to improve current knowledge on aged biomass burning aerosol and its radiative properties as a function of the seasonal cycle; 2) to use surface-based remote sensing to sensitively interrogate the atmosphere for the relative vertical location of aerosol and clouds; 3) to improve our understanding of the cloud adjustments to the presence of shortwave-absorbing aerosol within the vertical column, both through aerosol-radiation and through aerosol-cloud interactions; 4) to aid low cloud parameterization efforts for climate models. The measurements span June 1, 2016-October 31, 2017, encompassing two July-October biomass burning seasons. The August-September, 2016, months include an intensive operational period (IOP) with 8x/daily radiosondes. In 2017, from 16 August through 7 September, the United Kingdom Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 plane was deployed from Ascension, providing complementary data on the atmosphere’s vertical structure as part of the Cloud-Aerosol-Radiation Interactions and Forcing (CLARIFY) project, with similar scientific goals. The National Aeronautics and Space Administration (NASA) Observations of Clouds above Aerosols and their Interactions (ORACLES) aircraft campaign, sharing similar objectives to LASIC, deployed from Namibia in September, 2016, and Sao Tome in August, 2017. The latter included a suitcase flight to Ascension spanning August 18-21. In 2017 a cavity-attenuated phase shift single-scattering albedo (CAPS-SSA) instrument belonging to Aerodyne was brought to Ascension, gathering data primarily for August, towards providing a second, independent measurement of aerosol absorption. Ascension Island is also an Aerosol Robotic Network (AERONET) site.

biomass burning, aerosols, black carbon, boundary-↗
DOE OSTI2017

stereocambmovie (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

stereocamb (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

stereocamamovie (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

stereocama (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Cloud, Aerosol, and Complex Terrain Interactions (CACTI) Preliminary Science Plan

General circulation models and downscaled regional models exhibit persistent biases in deep convective initiation location and timing, cloud top height, stratiform area and precipitation fraction, and anvil coverage. Despite important impacts on the distribution of atmospheric heating, moistening, and momentum, nearly all climate models fail to represent convective organization, while system evolution is not represented at all. Improving representation of convective systems in models requires characterization of their predictability as a function of environmental conditions, and this characterization depends on observing many cases of convective initiation, non-initiation, organization, and non-organization. The Cloud, Aerosol, and Complex Terrain Interactions (CACTI) experiment in the Sierras de Córdoba mountain range of north-central Argentina is designed to improve understanding of cloud life cycle and organization in relation to environmental conditions so that cumulus, microphysics, and aerosol parameterizations in multi-scale models can be improved. The Sierras de Córdoba range has a high frequency of orographic boundary-layer clouds, many reaching congestus depths, many initiating into deep convection, and some organizing into mesoscale systems uniquely observable from a single fixed site. Some systems even grow upscale to become among the deepest, largest, and longest-lived in the world. These systems likely contribute to an observed regional trend of increasing extreme rainfall, and poor prediction of them likely contributes to a warm, dry bias in climate models downstream of the Sierras de Córdoba range in a key agricultural region. Many environmental factors influence the convective lifecycle in this region including orographic, low-level jet, and frontal circulations, surface fluxes, synoptic vertical motions influenced by the Andes, cloud detrainment, and aerosol properties. Local and long-range transport of smoke resulting from biomass burning as well as blowing dust are common in the austral spring, while changes in land surface properties as the wet season progresses impact surface fluxes and boundary layer evolution on daily and seasonal time scales that feed back to cloud and rainfall generation. This range of environmental conditions and cloud properties coupled with a high frequency of events makes this an ideal location for improving our understanding of cloud-environment interactions. The following primary science questions will be addressed through coordinated first ARM Mobile Facility (AMF1), mobile C-band Scanning ARM Precipitation Radar (C-SAPR2), guest instrumentation, and potential ARM Aerial Facility (AAF) Gulfstream-1 (G-1) observations: 1. How are the properties and lifecycles of orographically generated cumulus humulis, mediocris, and congestus clouds affected by environmental kinematics, thermodynamics, aerosols, and surface properties? How do these cloud types alter these environmental conditions? 2. How do environmental kinematics, thermodynamics, and aerosols impact deep convective initiation, upscale growth, and mesoscale organization? How are soil moisture, surface fluxes, and aerosol properties altered by deep convective precipitation events and seasonal accumulation of precipitation? This multi-faceted experiment involves a long term 8.5-month Extended Observing Period (EOP, 15 August, 2018-30 April, 2019) as well as a 6-week Intensive Observation Period (IOP, 1 November-15 December) that will coincide with the international multi-agency RELAMPAGO field campaign.

54 ENVIRONMENTAL SCIENCES↗