Engineering PapersSearch

Engineering topics

Rogstad, David H.

Publications and source records attributed to Rogstad, David H..

Aligning a Receiving Antenna Array to Reduce Interference

A digital signal-processing algorithm has been devised as a means of aligning (as defined below) the outputs of multiple receiving radio antennas in a large array for the purpose of receiving a desired weak signal transmitted by a single distant source in the presence of an interfering signal that (1) originates at another source lying within the antenna beam and (2) occupies a frequency band significantly wider than that of the desired signal. In the original intended application of the algorithm, the desired weak signal is a spacecraft telemetry signal, the antennas are spacecraft-tracking antennas in NASA s Deep Space Network, and the source of the wide-band interfering signal is typically a radio galaxy or a planet that lies along or near the line of sight to the spacecraft. The algorithm could also afford the ability to discriminate between desired narrow-band and nearby undesired wide-band sources in related applications that include satellite and terrestrial radio communications and radio astronomy. The development of the present algorithm involved modification of a prior algorithm called SUMPLE and a predecessor called SIMPLE. SUMPLE was described in Algorithm for Aligning an Array of Receiving Radio Antennas (NPO-40574), NASA Tech Briefs Vol. 30, No. 4 (April 2006), page 54. To recapitulate: As used here, aligning signifies adjusting the delays and phases of the outputs from the various antennas so that their relatively weak replicas of the desired signal can be added coherently to increase the signal-to-noise ratio (SNR) for improved reception, as though one had a single larger antenna. Prior to the development of SUMPLE, it was common practice to effect alignment by means of a process that involves correlation of signals in pairs. SIMPLE is an example of an algorithm that effects such a process. SUMPLE also involves correlations, but the correlations are not performed in pairs. Instead, in a partly iterative process, each signal is appropriately weighted and then correlated with a composite signal equal to the sum of the other signals.

Jongeling, Andre P.

VLBI in the Deep Space Network: Challenges and Prospects

The purpose of this paper is to highlight the current status and prospects for VLBI in the NASA Deep Space Network (DSN). Although the prime purpose of the DSN is to support spacecraft operations and space research in deep space, this unique facility is also used on a noninterference basis with flight projects to support ground-based science experiments. The DSN VLBI capabilities are an integral part of a number of space- and ground-based projects. They include support of experiments at major radio astronomy VLBI networks (e.g., VLBA, EVN, APT), space VLBI co-observing, as well as VLBI geodesy and astrometry programs. The paper will describe for the potential DSN VLBI users 1) DSN VLBI objectives, 2) the current organizational structure and 3) current and projected capabilities.

Altunin, Valery I.

Real-Time Connected-Element Radio-Interferometer System

Real-time connected-element radio-interferometer system incorporates two receiving stations, separated by relatively short baseline of only 21 km, communicating via fiber-optic data and timing links. Provides accuracies of 50 to 100 nanoradians for measuring angular positions of interplanetary spacecraft and extra-galactic quasers. Overall system and various components adaptable to such terrestrial uses as navigation and distribution of precise time and frequency reference signals.

Edwards, Charles D.