Engineering Papers⌕ Search

Engineering topics

Rogers, C T

Publications and source records attributed to Rogers, C T.

Control of Beam Losses in the Front End for the Neutrino Factory

In the Neutrino Factory and Muon Collider, muons are produced by firing high energy protons onto a target to produce pions. The pions decay to muons which are then accelerated. This method of pion production results in significant background from protons and electrons, which may result in heat deposition on superconducting materials and activation of the machine preventing manual handling. In this paper we discuss the design of a secondary particle handling system. The system comprises a solenoidal chicane that filters high momentum particles, followed by a proton absorber that reduces the energy of all particles, resulting in the rejection of low energy protons that pass through the solenoid chicane. We detail the design and optimization of the system and its integration with the rest of the muon front end.

43 PARTICLE ACCELERATORS↗

Wedge absorber design and simulation for MICE Step IV

In the Muon Ionization Cooling Experiment (MICE), muons are cooled by passing through material, then through RF cavities to compensate for the energy loss; which reduces the transverse emittance. It is planned to demonstrate longitudinal emittance reduction via emittance exchange in MICE by using a solid wedge absorber in Step IV. Based on the outcome of previous studies, the shape and material of the wedge were chosen. We address here further simulation efforts for the absorber of choice as well as engineering considerations in connection with the absorber support design.

43 PARTICLE ACCELERATORS↗

Design for a Muon Front End with Magnetically Shielded RF Cavities

In the baseline Neutrino Factory muon front end, strong, closely spaced solenoid magnets are used to contain the high emittance muon beam. In addition, significant acceleration is required for bunching, phase rotation and cooling, requiring RF cavities operating near to their maximum achievable gradient. There are experimental indications that RF cavities may not be able to achieve these large gradients in the presence of such intense magnetic fields. In this paper, I discuss the design of a muon cooling channel that is designed with RF cavities removed from the intense magnetic fields, and examine the change in performance that results from this compromise.

43 PARTICLE ACCELERATORS↗

A Dogbone Cooling Channel

Muon cooling schemes typically involve placing RF cavities in intense magnetic fields. Ongoing work has shown that this may reduce the maximum RF gradient by a significant factor. A linear cooling channel scheme is presented whereby RF cavities sit in much smaller fields. In addition, a scheme is studied for recirculating muons through this linear cooling channel in order to re-use hardware.

43 PARTICLE ACCELERATORS↗

High-Q GaN nanowire resonators and oscillators

We report high mechanical quality factors Q for GaN nanowire cantilevers grown by molecular beam epitaxy. Nanowires with 30-500 nm diameters and 5-20 {mu}m lengths having resonance frequencies from 400 kHz to 2.8 MHz were measured. Q near room temperature and 10{sup -4} Pa ranged from 2700 to above 60 000 with most above 10 000. Positive feedback to a piezoelectric stack caused spontaneous nanowire oscillations with Q exceeding 10{sup 6}. Spontaneous oscillations also occurred with direct e-beam excitation of unintentionally doped nanowires. Doped nanowires showed no oscillations, consistent with oscillation arising via direct actuation of piezoelectric GaN.

36 MATERIALS SCIENCE↗