Engineering topics

Roberts, Elwyn

Publications and source records attributed to Roberts, Elwyn.

3 records

DOE OSTI2022

A layered 2D computational framework: Theory and applications to nuclear fuel behavior

Nuclear fuel performance computer codes have been developed over the last 50 years to analyze fuel behavior under various operating conditions. Traditionally, these codes used quasi-two-dimensional (also commonly known as 1.5D) representations of the fuel rod, which model the rod using a set of one-dimensional axisymmetric models that represent the behavior at specific axial positions on the rod. Modern fuel performance codes have the ability to investigate full three-dimensional (3D) effects and couple to other physics-based codes for true multiphysics simulations. However, with increasing complexity comes increasing computational costs. Many phenomena of interest involve azimuthally-varying behavior that cannot be represented using the aforementioned quasi-two-dimensional approach, but do not require the use of a full 3D model. To efficiently address these problems, there is a need for a computational framework that provides a compromise between the quasi-two-dimensional and full 3D models. In this paper, we present a new quasi-three-dimensional approach that represents the fuel as a set of 2D planar models that represent the behavior of the fuel cross-section at various axial positions. Presented here are the theory behind the methodology, test cases to illustrate proper implementation, and practical applications of its use in the BISON fuel performance code for a variety of cases in nuclear fuel analysis, such as fuel fracture, axial fuel relocation, and cladding distension and oxidation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Separate-Effects Tests for Studying Temperature-Gradient-Driven Cracking in UO 2 Pellets

We report a variety of normal operation and accident scenarios can generate thermal stresses large enough to cause cracking in light-water reactor (LWR) fuel pellets. Cracking of fuel pellets can lead to reduced heat removal, higher centerline temperatures, and localized stress in cladding, all of which impact fuel performance. It is important to experimentally characterize the thermal and mechanical behavior in the pellet before and after cracking to improve cracking models in fuel performance codes. However, in-reactor observation and measurement of cracking is very challenging due to the harsh environment and logistics. Recently, an experimental pellet cracking test stand was developed for separate effects testing of normal operations and accident temperature conditions, using thermal imaging to capture the pellet surface temperature for evaluation of thermal stresses and optical imaging to capture the evolution of cracking in real time. Experiments were performed using depleted uranium dioxide (UO 2 ) pellets, which are useful for collecting data valuable for development and validation of cracking models. A combination of induction and resistance heating was used to create an average temperature gradient of 236°C/cm and 193°C/cm before and after cracking respectively. Characterization of the pellets were done before as well as after cracking. The cracking patterns are somewhat different than those expected in a typical reactor because of the differences in thermal conditions and pellet microstructure. However, if the actual conditions of these experiments are reproduced in computational models, these out-of-pile tests on UO 2 pellets provide relevant data for modeling purposes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Mechanistic verification of empirical UO 2 fuel fracture models

Standard UO 2 fuel pellets used in light-water reactors fracture during irradiation due to the large thermal gradient in the radial direction. Over the decades, numerous researchers have explored fuel cracking from experimental and modeling points of view. To date, there have been both empirical and mechanistic approaches to predict the number of fragments that form in UO 2 . The empirical models only consider maximum power and burnup as inputs. Existing mechanistic approaches for normal operation have not accounted for irradiation effects. Here, this work employs a mechanistic fuel cracking model using the extended finite element method to explore radial crack formation while including a sensitivity analysis that accounts for the randomization of tensile strength within the fuel, the strength randomization criteria (uniform or volume-weighted Weibull), power ramping rates, computational mesh density, maximum power level, and irradiation (burnup) effects. The results indicate that the uncertainty in this mechanistic modeling approach envelopes the predicted values from three different empirical correlations in almost all cases. This means that, for computationally intensive analyses involving UO 2 fragmentation, the empirical correlations can be used. However, since the mechanistic calculations bound those of the empirical correlations, there is confidence in the applicability of the mechanistic approach developed in this work to generate a correlation for fuel types where limited data exists (e.g., doped-UO 2 , U 3 Si 2 ).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗