Engineering topics

Roberts, B. B.

Publications and source records attributed to Roberts, B. B..

At least 19 records

NASA NTRS1986

Mission analysis and phased development of a lunar base

Manned lunar base activities may support one or more of three basic objectives: scientific research, the exploitation of lunar resources to manufacture a space infrastructure, and the establishment of a self-sufficient lunar base that can serve as a springboard toward long term planetary exploration. The present analysis gives attention to the commonality that may exist among the operational requirements of the three stated goals, as well as the degree of dependency of later developmental phases on the technology and systems development efforts of earlier phases.

Roberts, B. B.↗

NASA NTRS1986

Orbital-Transfer Vehicle With Aerodynamic Braking

Vehicle includes airbrake for deceleration into lower orbit. Report describes vehicle for carrying payloads between low and high orbits around Earth. Vehicle uses thin, upper atmosphere for braking when returning to low orbit. Since less propellant needed than required for full retrorocket braking, vehicle carries larger payload and therefore reduces cost of space transportation.

Scott, C. D.↗

NASA NTRS1985

Systems analysis and technology development for the NASA Orbit Transfer Vehicle

The benefits derived from aerobraking technology development for the Orbit Transfer Vehicle (OTV) are analyzed. The relative advantages of several other candidate OTV technologies are evaluated, and a relative ranking on the basis of performance considerations is presented. It is shown that aerobraking technologies can provide significant cost reductions for delivery of payloads to geosynchronous orbit, and that new and unique design concepts for OTVs must be pursued in order to realize the promised cost benefits. The goal for an aerobraked vehicle is an upper limit of 20 percent of the vehicle devoted to aero systems. Practical OTV configurations based on a concept of integrated structural design that can achieve this goal are suggested. A concept for a flight experiment to acquire the data needed to advance the discussed aeroassist technologies is proposed.

Roberts, B. B.↗

NASA NTRS1985

Particle size, number, composition and velocity from solid rocket motors

The damage potentials to the space shuttle orbiter caused by the high velocity particles contained in the exhaust plume of an upper stage is discussed. In particular, the particle size distribution and composition, the velocity of the particles and the expected contribution from shuttle launched upper stages are addressed. Particle size estimates based on historical data are compapred with those derived from upper stage motor performance testing. The particle velocities as determined by the best available plume computational technique are presented. The shuttle is scheduled to launch approximately 135 upper-stages over its lifetime looking at the currently scheduled flights and averaging over a yearly basis yields the contribution of particulates from the uper-stages. On the average, 91,645 llbs of Al2O3 will be ejected on each launch. The analysis to determine how much of this 91,645 lbs will remain in orbit or the decay rate is yet to be accomplished.

Roberts, B. B.↗

NASA NTRS1985

Design study of an integrated aerobraking orbital transfer vehicle

An aerobraking orbital transfer vehicle (AOTV) concept, which has an aerobrake structure that is integrated with the propulsion stage, is discussed. The concept vehicle is to be assembled in space and is space-based. The advantages of aeroassist over an all propulsive vehicle are discussed and it is shown that the vehicle considered is very competitive with inflatable and deployable concepts from mass and performance aspects. The aerobrake geometry is an ellipsoidally blunted, raked-off, elliptical wide-angle cone with a toroidal skirt. Propellant tanks, engines, and subsystems are integrated into a closed, isogrid aerobrake structure which provides rigidity. The vehicle has two side-firing, gimbaled RL-10 type engines and carries 38,000 kg of useable propellant. The trajectory during aerobraking is determined from an adaptive guidance logic, and the heating is determined from engineering correlations as well as 3-D Navier-Stokes solutions. The AOTV is capable of placing 13,500 kg payload into geosynchronous Earth orbit (GEO) or carrying a LEO-GEO-LEO round-trip payload of 7100 kg. A two-stage version considered for lunar missions results in a lunar surface delivery capability of 18,000 kg or a round-trip capability of 6800 kg with 3860 kg delivery-only capability.

Scott, C. D.↗

NASA NTRS1985

Towards a lunar base programme

When the requisite technlogy exists, the U.S. political process will inevitably include lunar surface activities as a major space objective. This article examines a manned lunar base in terms of three distinct functions: the scientific investigation of the moon and its environment; development of the capability to use lunar resources for beneficial purposes throughout the earth-moon system; and conduct of R and D leading to a self-sufficient and self-supporting manned lunar base. Three scenarios are outlined with respect to each possible function.

Duke, M. B.↗

NASA NTRS1985

The space shuttle ascent vehicle aerodynamic challenges configuration design and data base development

The phase B Space Shuttle systems definition studies resulted in a generic configuration consisting of a delta wing orbiter, and two solid rocket boosters (SRB) attached to an external fuel tank (ET). The initial challenge facing the aerodynamic community was aerodynamically optimizing, within limits, this configuration. As the Shuttle program developed and the sensitivities of the vehicle to aerodynamics were better understood the requirements of the aerodynamic data base grew. Adequately characterizing the vehicle to support the various design studies exploded the size of the data base to proportions that created a data modeling/management challenge for the aerodynamicist. The ascent aerodynamic data base originated primarily from wind tunnel test results. The complexity of the configuration rendered conventional analytic methods of little use. Initial wind tunnel tests provided results which included undesirable effects from model support tructure, inadequate element proximity, and inadequate plume simulation. The challenge to improve the quality of test results by determining the extent of these undesirable effects and subsequently develop testing techniques to eliminate them was imposed on the aerodynamic community. The challenges to the ascent aerodynamics community documented are unique due to the aerodynamic complexity of the Shuttle launch. Never before was such a complex vehicle aerodynamically characterized. The challenges were met with innovative engineering analyses/methodology development and wind tunnel testing techniques.

Dill, C. C.↗

NASA NTRS1985

The aerodynamic challenges of the design and development of the space shuttle orbiter

The major aerodynamic design challenge at the beginning of the United States Space Transportation System (STS) research and development phase was to design a vehicle that would fly as a spacecraft during early entry and as an aircraft during the final phase of entry. The design was further complicated because the envisioned vehicle was statically unstable during a portion of the aircraft mode of operation. The second challenge was the development of preflight aerodynamic predictions with an accuracy consistent with conducting a manned flight on the initial orbital flight. A brief history of the early contractual studies is presented highlighting the technical results and management decisions influencing the aerodynamic challenges. The configuration evolution and the development of preflight aerodynamic predictions will be reviewed. The results from the first four test flights shows excellent agreement with the preflight aerodynamic predictions over the majority of the flight regimes. The only regimes showing significant disagreement is confined primarily to early entry, where prediction of the basic vehicle trim and the influence of the reaction control system jets on the flow field were found to be deficient. Postflight results are analyzed to explain these prediction deficiencies.

Young, J. C.↗

NASA NTRS1985

Lunar base - A stepping stone to Mars

Basic elements of technology and programmatic development are identified that appear relevant to the Case for Mars, starting from a base on the moon. The moon is a logical stepping stone toward human exploration of Mars because a lunar base can provide the first test of human ability to use the resources of another planetary body to provide basic materials for life support. A lunar base can provide the first long-term test of human capability to work and live in a reduced (but not zero) gravity field. A lunar base requires creation of the elements of a space transportation system that will be necessary to deliver large payloads to Mars and the space operations capability and experience necessary to carry out a Mars habitation program efficiently and with high reliability. A lunar base is feasible for the first decade of the 21st Century. Scenarios have been studied that provide advanced capability by 2015 within budget levels that are less than historical U.S. space expenditures (Apollo). Early return on the investment in terms of knowledge, practical experience and lunar products are important in gaining momentum for an expanded human exploration of the solar system and the eventual colonization of Mars.

Duke, M. B.↗

NASA NTRS1985

Strategies for a permanent lunar base

One or more of three possible objectives, encompassing scientific research, lunar resource exploitation for space infrastructure construction, and lunar environment self-sufficiency refinement with a view to future planetary habitation, may be the purpose of manned lunar base activities. Attention is presently given to the possibility that the early phases of all three lunar base orientations may be developed in such a way as to share the greatest number of common elements. An evaluation is made of the cost and complexity of the lunar base, and the Space Transportation System used in conjunction with it, as functions of long term base use strategy.

Duke, M. B.↗

NASA NTRS1984

Toward a lunar base

A research program leading to the development of a design for a permanent manned lunar base is described. Attention is given to the advantages offered by the lunar environment for materials processing and scientific investigations, due to the absence of an atmosphere and the plentiful supply of certain materials (iron and titanium). It is shown that once a controlled environment capsule is placed on the lunar surface, work could begin toward the construction of a permanent facility using lunar materials. It is pointed out that the research effort required for the design of a lunar base could perform concurrently with the R&D for the Space Station, resulting in the emplacement of a controlled environment capsule by the year 2007.

Duke, M. B.↗

NASA NTRS1983

Plume base flow simulation technology

A combined analytical/empirical approach was studied in an effort to define the plume simulation parameters for base flow. For design purposes, rocket exhaust simulation (i.e., plume simulation) is determined by wind tunnel testing. Cold gas testing was concluded to be a cost and schedule effective data base of substantial scope. The results fell short of the target, although work conducted was conclusive and advanced the state of the art. Comparisons of wind tunnel predictions with Space Transportation System (STS) flight data showed considerable differences. However, a review of the technology program data base has yielded an additional parameter that may correlate flight and cold gas test data. Data from the plume technology program and the NASA test flights are presented to substantiate the proposed simulation parameters.

Roberts, B. B.↗

NASA NTRS1983

Space shuttle orbiter reaction control subsystem flight data anomalies

Shuttle orbiter vehicle flight data obtained during operation of the reaction control subsystem (RCS) were compared with predictions derived from RCS wind tunnel test data. This paper reviews the derivation of the wind tunnel data base and discusses how it was used to predict the full-scale RCS effects. Flight and predicted data comparisons include the lateral and directional aerodynamic effects of firing the side jets, longitudinal aerodynamics for pitch jets, and lateral aerodynamics for roll jets. Flight data anomalies resulting from wind tunnel limitations in representing portions of the entry flight trajectory are presented. The cause of each data anomaly is described, as well as a requirement for additional technical analysis to establish RCS effect simulation parameters that can be used to update jet effect technology.

Stone, J. S.↗

NASA NTRS1977

Applicability of empirical data currently used in predicting solid propellant exhaust plumes

Theoretical and experimental approaches to exhaust plume analysis are compared. A two-phase model is extended to include treatment of reacting gas chemistry, and thermodynamical modeling of the gaseous phase of the flow field is considered. The applicability of empirical data currently available to define particle drag coefficients, heat transfer coefficients, mean particle size, and particle size distributions is investigated. Experimental and analytical comparisons are presented for subscale solid rocket motors operating at three altitudes with attention to pitot total pressure and stagnation point heating rate measurements. The mathematical treatment input requirements are explained. The two-phase flow field solution adequately predicts gasdynamic properties in the inviscid portion of two-phase exhaust plumes. It is found that prediction of exhaust plume gas pressures requires an adequate model of flow field dynamics.

Tevepaugh, J. A.↗

NASA NTRS1975

Exhaust plume impingement of chemically reacting gas-particle flows

A series of computer codes has been developed to predict gas-particle flows and resulting impingement forces, moments and heating rates to surfaces immersed in the flow. The gas-particle flow solution is coupled via heat transfer and drag between the phases with chemical effects included in the gas phase. The flow solution and impingement calculations are discussed. Analytical results are compared with test data obtained to evaluate gas-particle effects on the Space Shuttle thermal protection system during the staging maneuver.

Smith, S. D.↗

NASA NTRS1974

Reaction control system plume flow field interaction effects on the Space Shuttle orbiter

This paper presents an analysis of data obtained from wind tunnel tests of the aerodynamic interference induced by the reaction control system jets on Space Shuttle orbiter configurations. The test data was obtained using cold gas simulation techniques with nozzles scaled to match jet exit momentum ratio as the primary parameter at Mach numbers from 2.5 to 10. Significant induced effects have been found that degrade the performance of the pitch and roll reaction controls and that induce cross-coupling effects for yaw reaction control. Analysis of the induced data shows good correlation with jet exit momentum ratio.

Rausch, J. R.↗

NASA NTRS1974

An improved solution of the simplified two-phase plume

An exact solution of the two-phase, gas-particle, solid propellant rocket exhaust plume flowfield is presented. The good agreement between the exact solution and the experimental data proves that the accuracy of the present technique is acceptable for, at least, preliminary design calculations. A good comparison between the plume impingement effects predicted by the exact solution and those by the best computer code available has also been found for various propellant formulations and rocket sizes. This shows that the present exact solution does describe the basic characteristics of the two-phase plume. In case of a parametric analysis for obtaining an optimum design, the present exact solution will be a more convenient tool than any one of the numerical techniques especially when many parameters are involved in the optimization study. Several typical results are shown herein and their physical significance is discussed.

Wang, S. Y.↗

NASA NTRS1974

Effect of gaseous and solid simulated jet plumes on an 040A space shuttle launch configuration at m=1.6 to 2.2

The effect of plume-induced flow separation and aspiration effects due to operation of both orbiter and the solid rocket motors on a 0.019-scale model of the launch configuration of the Space Shuttle Vehicle is determined. Longitudinal and lateral-directional stability data were obtained at Mach numbers of 1.6, 2.0, and 2.2 with and without the engines operating. The plumes exiting from the engines were simulated by a cold-gas jet supplied by an auxiliary 200-atm air supply system and solid-body plume simulators. The aerodynamic effects produced by these two simulation procedures are compared. The parameters most significantly affected by the jet plumes are pitching moment, elevon control effectiveness, axial force, and orbiter wing loads. The solid rocket motor (SRM) plumes have the largest effect on the aerodynamic characteristics. The effect of the orbiter plumes in combination with the SRM plumes is also significant. Variations in the nozzle design parameters and configuration changes can reduce the jet plume-induced aerodynamic effects.

Dods, J. B., Jr.↗